+7 (812) 645-08-06
Equipment for extrusion lines
select brand
Vacuum calibration tank for tubes and profiles extrusion - Medvac
CONAIR built their Medvac flood-cooling/sizing tanks with the specific process requirements...
Vacuum calibration tank for tubes and profiles extrusion - Medvac
CONAIR built their Medvac flood-cooling/sizing tanks with the specific process requirements of medical tubing manufacturers in mind. They are designed with easy to operate user-interface and are engineered to provide precise alignment to produce premium product for tubes from single and multilument microbore heart cathethers to large-gauge commodity medical tubing.
Vacuum calibration tank for tubes and profiles extrusion - HTMP series
The HTMP series of vacuum sizing equipment from CONAIR, provide fast high rate medical tubing productivity...
Vacuum calibration tank for tubes and profiles extrusion - HTMP series
The HTMP series of vacuum sizing equipment from CONAIR, provide fast high rate medical tubing productivity in small work spaces. It employs servo powered multi-pass sheaves inside the first cooling tank for residence times that are product-specific, and product metering and cooling that are precise. The HTMP is ideally used for cleanroom and tight spaced work places, while providing top notch services.
Vacuum calibration tank for tubes and profiles extrusion - max. ø 114.3 mm (4.5") | MT series
The highly efficient MT Vacuum Sizing Tanks manufactured by CONAIR provides plate heat exchanger models with a comprehensive...
Vacuum calibration tank for tubes and profiles extrusion - max. ø 114.3 mm (4.5") | MT series
The highly efficient MT Vacuum Sizing Tanks manufactured by CONAIR provides plate heat exchanger models with a comprehensive range of tank sizes and pump configurations. Furthermore, it has a consistent vacuum for accurate sizing of tube and profile extrusions up to 4.5 inches (114.3 mm) in diameter. In addition, product tolerances and surface completion are improved with their water and air separation technology. Great quality is assured while scrap is reduced.
Cooling bath for extrusion / tube - MSBHI series
The WATER SPRAY TANKS MSBHI from Conair stands out from its competition because it produces a high-pressure spray that cools tube and profile extrusions faster...
Cooling bath for extrusion / tube - MSBHI series
The WATER SPRAY TANKS MSBHI from Conair stands out from its competition because it produces a high-pressure spray that cools tube and profile extrusions faster and in less space. Its cooling rates can also increase further with an optional pump and heat exchanger system. This machine is very easy to operate because it has built-in water manifold system that has water valves dedicated to each chamber. This is made with high class stainless-steel components which guarantees its durability. Other surfaces are painted for corrosion resistance. This is available in 4.9meters, a 2-chamber tank which is 7.3meters and a three-chamber tank.
Cooling bath for extrusion / tube - max. ø 152 mm (6") | MCB series
The Conair MCB cooling tanks are designed for flood cooling of tubing, profile or pipe extrusions. An optional spray cooling feature is also available. the...
Cooling bath for extrusion / tube - max. ø 152 mm (6") | MCB series
The Conair MCB cooling tanks are designed for flood cooling of tubing, profile or pipe extrusions. An optional spray cooling feature is also available. the cooling functionality can extend up to 155 mm (6 inches). The flood cooling mechanism features internal plumbing that can handle considerable turbulence, displaces warm water that usually insulates the product, ensuring efficient cooling. The spray cooling functionality uses evaporative cooling to improve the rate of heat transfer. To intuitively adjust the water level for both spray and flood cooling, an adjustable rotary water control is implemented.
Plastic film extrusion winding machine - maw. 450 m/min | FILMATIC
The FILMATIC is a film winder engineered by Windmoller and Holscher, that features an original universal turret...
Plastic film extrusion winding machine - maw. 450 m/min | FILMATIC
The FILMATIC is a film winder engineered by Windmoller and Holscher, that features an original universal turret winder for a good roll quality. This product is capable of handling films at speeds of an utmost 200 m/min and up to 450m/min in cases of usage in downstream of cast film systems. Furthermore, Filmatic enables forward and reverse winding due to its center and gap winding system from roll start or reverse rotation process.
Monoaxial MDO stretching machine for films (machine direction orientation) - max. 350 m/min | MDO
The technology used with MDO* products is proven in terms of reliability and saves resources, improves film properties and optimizes films for specific use. Both cast and blown films can be stretched mono-axially online or offline with an MDO from W&H. The...
Monoaxial MDO stretching machine for films (machine direction orientation) - max. 350 m/min | MDO
The technology used with MDO* products is proven in terms of reliability and saves resources, improves film properties and optimizes films for specific use. Both cast and blown films can be stretched mono-axially online or offline with an MDO from W&H. The process carried out with the help of MDO enhances barrier properties and gives mono and co-extruded films enhanced tensile strength and stiffness with better shrink properties and increased gloss with higher transparency.
The high-quality performance of MDO films translates into significant savings by reducing cost on expensive raw materials, especially for barrier films. For any business, what matters is reduced cost and material usage, which is good for both the environment as well as the bottom line. These MDO optimized films can be used in a variety of applications including barrier films, breathable films for hygiene and construction along with films for heavy-duty sacks, adhesive tapes, labels, standup pouches and food packaging applications.
The high-quality performance of MDO films translates into significant savings by reducing cost on expensive raw materials, especially for barrier films. For any business, what matters is reduced cost and material usage, which is good for both the environment as well as the bottom line. These MDO optimized films can be used in a variety of applications including barrier films, breathable films for hygiene and construction along with films for heavy-duty sacks, adhesive tapes, labels, standup pouches and food packaging applications.
Twin-screw feeder / for extruders - 10 - 750 Nm | ZS-B series
The ZS-B twin screw side feeder is an advanced device and facilitates the side feeding of additives and fillers in pellet or powder form, as well as the cutting of glass fibers into...
Twin-screw feeder / for extruders - 10 - 750 Nm | ZS-B series
The ZS-B twin screw side feeder is an advanced device and facilitates the side feeding of additives and fillers in pellet or powder form, as well as the cutting of glass fibers into the processing section of the extruder. Another important aspect is the fact that this item requires very limited space to perform its denoted functions, because of the compact and efficient design it was made with.
Next, users should know that they can mount the side feeder anywhere on the process section of the extruder, and combine it with a connection housing. Fast assembly and dissembly is permitted by the C-washers on the barrels, while the standard version of this product comes with a base frame on its castors.
Next, users should know that they can mount the side feeder anywhere on the process section of the extruder, and combine it with a connection housing. Fast assembly and dissembly is permitted by the C-washers on the barrels, while the standard version of this product comes with a base frame on its castors.
Side degassing unit for extruder - ZS-EG series
The ZS EG device, from the ZSK series, is incorporated with a standard top vent barrel. This is used in the removal of thin melts and extrusion processes. The device can...
Side degassing unit for extruder - ZS-EG series
The ZS EG device, from the ZSK series, is incorporated with a standard top vent barrel. This is used in the removal of thin melts and extrusion processes. The device can also be utilized in the removal of low-viscous substances, which require extreme gas volumes.
The unit provides a wide cross section for devolatilization tasks, wherein the processing section is located. The melt is maintained in the processing section without any product escape.
Additionally, Coperion's twin screw guide degassing produces a large throughput rate of 30%, with a better product quality. The gases are removed through the use of the open screw flights.
The unit provides a wide cross section for devolatilization tasks, wherein the processing section is located. The melt is maintained in the processing section without any product escape.
Additionally, Coperion's twin screw guide degassing produces a large throughput rate of 30%, with a better product quality. The gases are removed through the use of the open screw flights.
Polymer strand extrusion conveyor belt - 60 m/min | SC
The Coperion SC is a high performance Strand Conveyance system design to gently...
Polymer strand extrusion conveyor belt - 60 m/min | SC
The Coperion SC is a high performance Strand Conveyance system design to gently and efficiently move fragile and brittle products. The unit can be adapted for water soluble products by using a reliable waterless, air cooling system and can be equipped with textile fabric, stainless steel mesh wire conveying belts.
Blown film extrusion line cooling system - 21 m3/h | PWK series
Coperion Strand Cooling Trough Type CT pelletizers can be ordered in multiple versions, with trough...
Blown film extrusion line cooling system - 21 m3/h | PWK series
Coperion Strand Cooling Trough Type CT pelletizers can be ordered in multiple versions, with trough width up to 1,000 mm, depth up to 250 mm and length up to 10,000 mm. They are made out of stainless steel, and strand guide rolls are available in different materials. The strands are cooled by process water, and the heat exchanger cools the process water via chilled water.