+7 (812) 645-08-06
Hydraulic power units
select brand
Hydraulic power unit - PAC series
Known for its convenience and flexibility, CP hydraulic power packs are available...
Hydraulic power unit - PAC series
Known for its convenience and flexibility, CP hydraulic power packs are available in petrol and diesel driven versions. These world-class quality power packs provide portable power for a long list of applications in the 20-40 lpm/172 bar range. Best of all, the gauge displays when it's time to change filters.
Electrically-driven hydraulic power unit - max. 1.64 l/min, 100 - 350 bar | ZW5 series
Enerpac electric-driven work-holding pumps are available in several models including electric...
Electrically-driven hydraulic power unit - max. 1.64 l/min, 100 - 350 bar | ZW5 series
Enerpac electric-driven work-holding pumps are available in several models including electric controls and isolating valves. These pumps use 230/400V, 50Hz 1.1kW motors and operate at 100-350bar, with 1.64l/min oil flow at 350bar. Pumps feature adjustable relief valves, are stackable to 8 VP-series valve stations high, and feature IP54 class protection.
Air-driven hydraulic power unit / high-pressure - max. 0.15 l/min, max. 700 bar | PAM series
The PAM-Series, Air Hydraulic Pumps are engineered by Enerpac. They are designed with dual...
Air-driven hydraulic power unit / high-pressure - max. 0.15 l/min, max. 700 bar | PAM series
The PAM-Series, Air Hydraulic Pumps are engineered by Enerpac. They are designed with dual air piston contour that provides excellent flow rate. A 4 and 8 liters reservoirs are also available to cater a variety of cylinders. In addition, they are equipped with an optimized covering that ensures air motor protection and convenient transport of the power unit.
Air-driven hydraulic power unit / high-pressure - max. 1.31 l/min, max. 700 bar | ZA4 series
Enerpac ZA4 high pressure modular air hydraulic pumps feature Z-Class high efficiency air pump design; higher oil flow and bypass pressure
ATEX 95 certified...
ATEX 95 certified...
Air-driven hydraulic power unit / high-pressure - max. 1.31 l/min, max. 700 bar | ZA4 series
Enerpac ZA4 high pressure modular air hydraulic pumps feature Z-Class high efficiency air pump design; higher oil flow and bypass pressure
ATEX 95 certified for use in potentially explosive atmospheres
Two-speed pump operation reduces cycle time for improved productivity
User adjustable relief valve built-in on manual valves. Oil ports on valves are 3/8" NPTF
Optional heat exchanger warms exhaust air to prevent freezing and cools the oil
Full sight oil level glass on 10, 20 and 40 litres reservoirs for easy monitoring of the hydraulic power unit's oil level, oil level indicators on 4 and 8 litres reservoirs.
ATEX 95 certified for use in potentially explosive atmospheres
Two-speed pump operation reduces cycle time for improved productivity
User adjustable relief valve built-in on manual valves. Oil ports on valves are 3/8" NPTF
Optional heat exchanger warms exhaust air to prevent freezing and cools the oil
Full sight oil level glass on 10, 20 and 40 litres reservoirs for easy monitoring of the hydraulic power unit's oil level, oil level indicators on 4 and 8 litres reservoirs.
Air-driven hydraulic power unit / compact / ultrahigh-pressure / power - max. 0.07 l/min, max. 1 500 bar | ATP series
ATP-Series, ultra high pressure air pump is a multi-purpose system that offers functionality...
Air-driven hydraulic power unit / compact / ultrahigh-pressure / power - max. 0.07 l/min, max. 1 500 bar | ATP series
ATP-Series, ultra high pressure air pump is a multi-purpose system that offers functionality to operations that demands 1500 bar hydraulic pressure rating. It is constructed in compressed, lightweight and robust steel frame for secured and convenient handling of the power unit. This pump integrates a pre-lubricated material that minimizes the need for airline greasing.
Hydraulic power unit / internal combustion engine / high-pressure - max. 0.66 l/min, max. 700 bar | PGM series
Enerpac PGM series gas hydraulic pumps are designed for high efficiency, with high by-pass pressure...
Hydraulic power unit / internal combustion engine / high-pressure - max. 0.66 l/min, max. 700 bar | PGM series
Enerpac PGM series gas hydraulic pumps are designed for high efficiency, with high by-pass pressure for improved productivity. It has a coaxial piston design that guarantees high performance and a first-stage piston pump for improved efficiency. It is equipped with a four-cycle Honda motor size of 2,2 kW. It is available in sturdy roll cage for tough environments.
Hydraulic power unit for mobile applications - 6 - 11 bar, 0.3 - 0.5 l/min
These hydropneumatic roof drives are made to use canopy adjustments and can be operated on an emergency basis. These are connected to air supplies and lift drives while using a support setup for commercial...
Hydraulic power unit for mobile applications - 6 - 11 bar, 0.3 - 0.5 l/min
These hydropneumatic roof drives are made to use canopy adjustments and can be operated on an emergency basis. These are connected to air supplies and lift drives while using a support setup for commercial vehicle trailers. These are supported by gas springs but manual hydraulics can also be used.
Hoerbiger has designed these units to work for managing all sorts of high-end units and setups. This may work with compressed air supplies for braking setups and can raise canopies by 400 to 500 mm in about 30 seconds. The pneumatic energy of a setup will be converted into hydraulic energy to make it happen. The unit has a single-piston axial pump that is made to where a hand pump that comes with the unit may add hydraulic pressure if compressed air from the vehicle is not available for use.
Hoerbiger has designed these units to work for managing all sorts of high-end units and setups. This may work with compressed air supplies for braking setups and can raise canopies by 400 to 500 mm in about 30 seconds. The pneumatic energy of a setup will be converted into hydraulic energy to make it happen. The unit has a single-piston axial pump that is made to where a hand pump that comes with the unit may add hydraulic pressure if compressed air from the vehicle is not available for use.
Hydraulic power unit for mobile applications - max. 215 bar
This product has a coating that is resistant saltwater and also an independent and calibrated system. Installation of this product is easier, quicker and more secure. The HOERBIGER...
Hydraulic power unit for mobile applications - max. 215 bar
This product has a coating that is resistant saltwater and also an independent and calibrated system. Installation of this product is easier, quicker and more secure. The HOERBIGER is established as a specialist in key hydraulic components for recreational water craft industries. We distribute famous producers of both sport and pleasure boats with tailor-made systems. These systems are distinct through high control performance, high power density and dynamic movements making them far superior to electromechanical solutions. Each component of our hydraulic systems can be provided with operating pressures of more than 200bars. It features resistance to high corrosion and effortless and cost-effective installations.
Lifters hydraulic power unit - 1 l/min, 160 - 250 bar
Hoerbiger made this valve to work for hydraulic needs. It uses a working platform that is made to use the target position that works with...
Lifters hydraulic power unit - 1 l/min, 160 - 250 bar
Hoerbiger made this valve to work for hydraulic needs. It uses a working platform that is made to use the target position that works with hydraulic power to make it sensible and ready to use. The unit is made with a leak-free setup and a high power density rating. This is easy to adjust and can last for a while with ease. This works for lifting gear to manage many lifting platforms and can be used to manage horizontal orientations on working surfaces where people move regularly. The unit can be adjusted to a position to make it stay in a spot.
Micro hydraulic power unit - HR080
The Micro power pack series HR080 comes with our well-constituted automotive radial piston pump incorporated into the pump carrier....
Micro hydraulic power unit - HR080
The Micro power pack series HR080 comes with our well-constituted automotive radial piston pump incorporated into the pump carrier. Moreover, to discern volume flow, 3 piston pumps are available. To continue, this top of the line product features a round and transparent tank oil-reservoir that has a G1/4 filler plug. Endless rotation of the tank is possible because of its unique type of mounting resulting to the ability to fix the filler bleed to the highest position possible. The tool is safe and easy to handle.