+7 (812) 645-08-06
Hydraulic power units
select brand
Hydraulic power unit - 20 - 40 kW | PPH series
The Drive unit PPH25 is commonly used for wire or wall saws and
drilling. It has two different...
drilling. It has two different...
Hydraulic power unit - 20 - 40 kW | PPH series
The Drive unit PPH25 is commonly used for wire or wall saws and
drilling. It has two different settings, enabling a fine variation of the
cutting speed. Their structure is quite robust. They are easy to repair
(if needed) because the plastic cover can easily be removed for repair.
Power needed is 25kW. Their electrical component are
safe and top quality.
drilling. It has two different settings, enabling a fine variation of the
cutting speed. Their structure is quite robust. They are easy to repair
(if needed) because the plastic cover can easily be removed for repair.
Power needed is 25kW. Their electrical component are
safe and top quality.
Hydraulic power unit for mobile applications - max. 750 bar | BW-2
Drive unit BW-2 which approximates optimal 750 bar operational tension, is complemented by a removable water-cooled electric...
Hydraulic power unit for mobile applications - max. 750 bar | BW-2
Drive unit BW-2 which approximates optimal 750 bar operational tension, is complemented by a removable water-cooled electric motor with voltage and current requirement respectively 200V / 230V / 380V / 400V / 460V and 16A. Its set-up provides convenience and easy handling. Generally, it is engineered to help break down and deliver reinforced concrete materials, and raze walls with a maximum width of 300 mm. 50 Hz/60 Hz is the recorded machine frequency and totals a 10 kW output production.
Hydraulic power unit for mobile applications - max. 2 000 bar | AU
The AU driving unit has an operating pressure of up to 2000 bar. Its'
pressing...
pressing...
Hydraulic power unit for mobile applications - max. 2 000 bar | AU
The AU driving unit has an operating pressure of up to 2000 bar. Its'
pressing force goes up to 2100 tons. The whole construction is robust,
and is suitable for press tools BTH30 and CP110. It can be used for
demolition of concrete. It makes low vibration, which is a needed
feature in some industries.
pressing force goes up to 2100 tons. The whole construction is robust,
and is suitable for press tools BTH30 and CP110. It can be used for
demolition of concrete. It makes low vibration, which is a needed
feature in some industries.
Torque wrench hydraulic power unit - ATEX
Hydraulic pumps with ATEX Certification
F.P.T. hydraulic...
F.P.T. hydraulic...
Torque wrench hydraulic power unit - ATEX
Hydraulic pumps with ATEX Certification
F.P.T. hydraulic pumps are available in explosion proof versions, in compliance with the requirements and provisions of ATEX Directive 94/9/CE.
Specifically designed for use in the Oil&Gas and Off-Shore sectors.
F.P.T. hydraulic pumps are available in explosion proof versions, in compliance with the requirements and provisions of ATEX Directive 94/9/CE.
Specifically designed for use in the Oil&Gas and Off-Shore sectors.
Hydraulic power unit with electric motor / oil pump - 0.9 - 7.9 cm³, 5 - 25 l, 700 bar | FPH series
The FPH series are portable hydraulic pumps which is ideal for frequent movement of use in construction sites and confined areas. The protection cage makes it easier...
Hydraulic power unit with electric motor / oil pump - 0.9 - 7.9 cm³, 5 - 25 l, 700 bar | FPH series
The FPH series are portable hydraulic pumps which is ideal for frequent movement of use in construction sites and confined areas. The protection cage makes it easier...
Hydraulic power unit with electric motor / oil pump / high-pressure - 0.9 - 7.9 cm³, 5 - 25 l, 700 bar | FPT series
The FPT series are portable hydraulic pumps which is ideal for frequent movement of use in construction sites and confined areas. The protection cage makes it...
Hydraulic power unit with electric motor / oil pump / high-pressure - 0.9 - 7.9 cm³, 5 - 25 l, 700 bar | FPT series
The FPT series are portable hydraulic pumps which is ideal for frequent movement of use in construction sites and confined areas. The protection cage makes it easier to move and lift the hydraulic pump while its dynamic construction and aluminum parts reduces the product's total weight. The three-phase electric motors and pneumatic motors give the product its flexibility which offers a broad range of FPT single or two-speed pumps with various flow rates. It may be mounted with 3 or 4-way manual, electric or pneumatic valves. Furthermore, it has been engineered to minimize maintenance to provide a prolonged service life.
Hydraulic power unit / internal combustion engine - 0.9 - 7.9 cm³, 5 - 25 l, 700 bar | FPH-MS series
The entire series is equipped with a protection cage that makes it easier to move and lift, protecting...
Hydraulic power unit / internal combustion engine - 0.9 - 7.9 cm³, 5 - 25 l, 700 bar | FPH-MS series
The entire series is equipped with a protection cage that makes it easier to move and lift, protecting it in construction sites.
Equipped with 4-stroke motor.
Various sizes of reservoirs, from 5 to 40 litres, for use with a wide range of equipment and cylinders.
P3 or 4-way manual, electric or pneumatic valves can also be mounted.
Reduced maintenance. Designed to last.
Equipped with 4-stroke motor.
Various sizes of reservoirs, from 5 to 40 litres, for use with a wide range of equipment and cylinders.
P3 or 4-way manual, electric or pneumatic valves can also be mounted.
Reduced maintenance. Designed to last.