+7 (812) 645-08-06
Pressure calibrators
select brand
Pressure calibration pump / pneumatic / hand - max. 40 bar | KP
Hand-pump K/P
Pressure generation: -0,8525/-0,95...40 bar
Negative pressures/vacuums and pressures of up to 25 bar (max. 40 bar) can be generated with this...
Pressure generation: -0,8525/-0,95...40 bar
Negative pressures/vacuums and pressures of up to 25 bar (max. 40 bar) can be generated with this...
Pressure calibration pump / pneumatic / hand - max. 40 bar | KP
Hand-pump K/P
Pressure generation: -0,8525/-0,95...40 bar
Negative pressures/vacuums and pressures of up to 25 bar (max. 40 bar) can be generated with this pneumatic hand-pump.
Thanks to the fine adjustment valve (which is integrated in the pump) and the relief valve, a calibration pressure can be set accurately and quickly.
This handpump is therefore highly suitable for testing manometers and pressure transmitters.
The pump is supplied without the carrying case, which is available as an option.
Weight: ≈1,1 kg Dimensions: 240 mm x 170 mm x 50 mm
Solid carrying case with interior foam cutout to fit one pump with manometer attached.
Pressure generation: -0,8525/-0,95...40 bar
Negative pressures/vacuums and pressures of up to 25 bar (max. 40 bar) can be generated with this pneumatic hand-pump.
Thanks to the fine adjustment valve (which is integrated in the pump) and the relief valve, a calibration pressure can be set accurately and quickly.
This handpump is therefore highly suitable for testing manometers and pressure transmitters.
The pump is supplied without the carrying case, which is available as an option.
Weight: ≈1,1 kg Dimensions: 240 mm x 170 mm x 50 mm
Solid carrying case with interior foam cutout to fit one pump with manometer attached.
Pressure calibration pump / hydraulic / hand - max. 700 bar | HTP1
Hand-pump HTP1
Pressure generation: 0700 bar
Pressures of up to 700 bar can be generated with this hydraulic hand-pump. Hydraulic oil or distilled water can be used as pressure medium (the pump...
Pressure generation: 0700 bar
Pressures of up to 700 bar can be generated with this hydraulic hand-pump. Hydraulic oil or distilled water can be used as pressure medium (the pump...
Pressure calibration pump / hydraulic / hand - max. 700 bar | HTP1
Hand-pump HTP1
Pressure generation: 0700 bar
Pressures of up to 700 bar can be generated with this hydraulic hand-pump. Hydraulic oil or distilled water can be used as pressure medium (the pump is supplied without fluid).
The reservoir has a capacity of approx. 1 dl (100 ccm), thus allowing the pump to be used with larger dead volumes.
The hand-pump with its integrated fine adjustment and relief valve is highly suitable for testing manometers and pressure transmitters.
The pump is supplied complete with accessories (hose, adaptor, etc.) in a stable carrying case.
Weight: ≈1,7 kg Dimensions: 255 mm x 176 mm x 70 mm
The reference device for accurate measurement of the actual pressure is screwed directly onto the hand-pump and is available as an option.
Pressure generation: 0700 bar
Pressures of up to 700 bar can be generated with this hydraulic hand-pump. Hydraulic oil or distilled water can be used as pressure medium (the pump is supplied without fluid).
The reservoir has a capacity of approx. 1 dl (100 ccm), thus allowing the pump to be used with larger dead volumes.
The hand-pump with its integrated fine adjustment and relief valve is highly suitable for testing manometers and pressure transmitters.
The pump is supplied complete with accessories (hose, adaptor, etc.) in a stable carrying case.
Weight: ≈1,7 kg Dimensions: 255 mm x 176 mm x 70 mm
The reference device for accurate measurement of the actual pressure is screwed directly onto the hand-pump and is available as an option.
Pressure calibrator / portable / high precision - CALYS 80P
CALYS 80P is a field pressure calibrator. It offers high precision of up to 0.01%. It is especially suitable for advanced process maintenance. It can also be used on test bench in non-hazardous areas. The unit may be used...
Pressure calibrator / portable / high precision - CALYS 80P
CALYS 80P is a field pressure calibrator. It offers high precision of up to 0.01%. It is especially suitable for advanced process maintenance. It can also be used on test bench in non-hazardous areas. The unit may be used for all kinds of field and lab measurements. It offers measurement and generation simultaneously, over isolated channels of pressure that are two in number. It will then process the signals. The device can also measure resistive probes and resistance signals. CALYS 80P offers a wide range of functionalities including temperature simulation, scaling, steps, synthesizer, statistical functions and audit trails. With these features, the device can exploit advanced data and trace full data. It stores and recalls up to 10 complete instrument configurations via manual/automatic recall. It can also recall more than 1,500 measurements with date and time.
Pressure calibrator / digital - max. 700 bar | P200 PRO
The P200 Pro is a field pressure process calibrator from AOIP that is integrated with a removable generation pump. It is capable of measuring and generate pressure from -1 to 700 bar at an accuracy of 0.025%FS....
Pressure calibrator / digital - max. 700 bar | P200 PRO
The P200 Pro is a field pressure process calibrator from AOIP that is integrated with a removable generation pump. It is capable of measuring and generate pressure from -1 to 700 bar at an accuracy of 0.025%FS. It is designed for calibration, verification and testing of pressure sensor, transmitters, manometers, pressostats and flow transmitters. It can generate process voltage and current with a Pt100 input for calibrating flow transmitters.
P200 Pro is a flexible, solid, and handy device that has an IP65 protection degree on its head and removable pump. It is an easy-to-operate calibration system and an internal pressure sensor. It is capable of displaying output pressure and input current or voltage, the pressure percentage, the pressostat status as well as the min/max pressure value.
P200 Pro is a flexible, solid, and handy device that has an IP65 protection degree on its head and removable pump. It is an easy-to-operate calibration system and an internal pressure sensor. It is capable of displaying output pressure and input current or voltage, the pressure percentage, the pressostat status as well as the min/max pressure value.
Pressure calibrator / digital - max. 2 MPa | CDP60
ATEQ presents CDP60 leak/flow calibrator. It has been dedicated to calibration. It is highly dependable and is traceable to international standards. The calibrator is used for testing the pressure calibration of leak/flow testers.
CDP60...
CDP60...
Pressure calibrator / digital - max. 2 MPa | CDP60
ATEQ presents CDP60 leak/flow calibrator. It has been dedicated to calibration. It is highly dependable and is traceable to international standards. The calibrator is used for testing the pressure calibration of leak/flow testers.
CDP60 is lightweight, small and easy-to-use. It is ideal for field or laboratory tests demanding unparalleled dependability and repeatability. It is also useful when large devices are either too heavy or simply unaffordable. The instrument allows accurate adjustment of pressure within the measuring range. Display shows a real-time reading. Additionally, it also allows storing test results and exporting them to an Excel spreadsheet. Its operating functionality can be quickly grasped by users. All units are calibrated in ATEQ's cutting-edge calibration facility. A calibration certificate is provided with each unit.
With these features, customers can get assured product quality and compliance with standards like ISO 9000.
CDP60 is lightweight, small and easy-to-use. It is ideal for field or laboratory tests demanding unparalleled dependability and repeatability. It is also useful when large devices are either too heavy or simply unaffordable. The instrument allows accurate adjustment of pressure within the measuring range. Display shows a real-time reading. Additionally, it also allows storing test results and exporting them to an Excel spreadsheet. Its operating functionality can be quickly grasped by users. All units are calibrated in ATEQ's cutting-edge calibration facility. A calibration certificate is provided with each unit.
With these features, customers can get assured product quality and compliance with standards like ISO 9000.