+7 (812) 645-08-06
Pressure calibrators
select brand
Pressure calibration pump / hand - max. 220 psi | APOV-PK
APOV is a hand operated pressure pump. It's a portable, lightweight pressure source perfect...
Pressure calibration pump / hand - max. 220 psi | APOV-PK
APOV is a hand operated pressure pump. It's a portable, lightweight pressure source perfect for several applications including laboratory or field pressure calibration. It has vernier control for fine adjustment, 2 3-ft. length hoses with 0.5" -20 UNF "finger tight" quick release ends and 2 adapters with 0.125NPT male termination.
Pressure calibration pump / hand - max. 60 psi | DPOV-PK
The DPOV is a rugged, lightweight hand operated pump in vacuum (-VK) and pressure (-PK)...
Pressure calibration pump / hand - max. 60 psi | DPOV-PK
The DPOV is a rugged, lightweight hand operated pump in vacuum (-VK) and pressure (-PK) configurations which includes vernier control for fine adjustment, (2) hoses; 3ft. length with .5" -20 UNF "finger tight" quick release ends, (2) adapters with 1/8 NPT male termination and convertible to pressure or vacuum generation.
Deadweight tester - max. 10 000 psi | 1305D
The Ashcroft Type 1305D is a deadweight tester used for the precise generation of pressure up to a reading accuracy of 0.1%. These units can be availed for operating ranges reaching 10,000psi. Ideally, the Ashcroft Type 1305D is for calibrating, testing, setting and repairing...
Deadweight tester - max. 10 000 psi | 1305D
The Ashcroft Type 1305D is a deadweight tester used for the precise generation of pressure up to a reading accuracy of 0.1%. These units can be availed for operating ranges reaching 10,000psi. Ideally, the Ashcroft Type 1305D is for calibrating, testing, setting and repairing the measurement in pressure and control devices.
Each of these units is guaranteed to meet the standards set by the National Institute of Standards and Technology, assuring the accuracy of the instrument, and is built to be field portable. There is a single carrying case which not only holds the pressure generation pump, but also all the required accessories and tools. There is also a second box which contains the weights that are utilized for pressure generation, which is 10,000 psi units to two boxes of weights.
The Ashton deadweight testers serve as primary standards in the field of pressure calibration. Its pump serves as a two-stage and hydraulic pressure generator. It is also equipped with a shuttle valve, allowing the increase in rapid pressure at low pressures.
Each of these units is guaranteed to meet the standards set by the National Institute of Standards and Technology, assuring the accuracy of the instrument, and is built to be field portable. There is a single carrying case which not only holds the pressure generation pump, but also all the required accessories and tools. There is also a second box which contains the weights that are utilized for pressure generation, which is 10,000 psi units to two boxes of weights.
The Ashton deadweight testers serve as primary standards in the field of pressure calibration. Its pump serves as a two-stage and hydraulic pressure generator. It is also equipped with a shuttle valve, allowing the increase in rapid pressure at low pressures.
Hydraulic comparator / for pressure calibration - max. 10 000 psi | 1327D
From the world wide recognized brand of Ashcroft® comes model 1327D is designed to be field-portable pressure generation and test systems. It holds a single carrying...
Hydraulic comparator / for pressure calibration - max. 10 000 psi | 1327D
From the world wide recognized brand of Ashcroft® comes model 1327D is designed to be field-portable pressure generation and test systems. It holds a single carrying...
Pressure calibration pump / hand - PHP Series
The model Pneumatic Hand Pump is a hand operated pump for sourcing pressure and vacuum. It is designed for use to verify calibration of pressure indicators,...
Pressure calibration pump / hand - PHP Series
The model Pneumatic Hand Pump is a hand operated pump for sourcing pressure and vacuum. It is designed for use to verify calibration of pressure indicators, switches, controllers, transmitters and recorders. It is also use in conjunction with a digital and analog gage for a complete calibration system. It includes a 30" or 1m hose with a 1/4" female NPT quick fit connector. The model PHP is an adjustable stroke to provide over pressure protection and fitted with a fine adjustment valve for precise volume control. The unit provides output pressures up to 600 psi or vacuum down to -28.5"Hg.
Pressure calibrator / intrinsically safe - Fluke 718Ex
Pump Up the Pressure
The new Fluke 718Ex Intrinsically Safe Pressure Calibrator is a new, powerful intrinsically safe, self contained pressure calibrator for usage in Explosion endangered areas.
The new Fluke 718Ex Intrinsically Safe Pressure Calibrator is a new, powerful intrinsically safe, self contained pressure calibrator for usage in Explosion endangered areas.
Pressure calibrator - -0.85 To 8 b | Fluke 719
The Fluke 719 Electric Pressure Calibrator enables a quick and easy way to calibrate and test pressure devices with one hand which saves valuable time. The Fluke 719 Electric Pressure Calibrator has...
Pressure calibrator - -0.85 To 8 b | Fluke 719
The Fluke 719 Electric Pressure Calibrator enables a quick and easy way to calibrate and test pressure devices with one hand which saves valuable time. The Fluke 719 Electric Pressure Calibrator has an innovative, built-in electric pump. The programmable pump limit settings prevent over-pressurization and enable 'pump to' pressure values to be set.
Pump failures are reduced by the unique cleanout port design which also makes the device easy to clean without repair. The one-handed calibration of the device combined with its compact and lightweight design make it the perfect tool for busy process professionals. Designed by the trusted brand name of Fluke, the Fluke 719 Electric Pressure Calibrator makes pressure calibration easy for all process calibration requirements.
Pump failures are reduced by the unique cleanout port design which also makes the device easy to clean without repair. The one-handed calibration of the device combined with its compact and lightweight design make it the perfect tool for busy process professionals. Designed by the trusted brand name of Fluke, the Fluke 719 Electric Pressure Calibrator makes pressure calibration easy for all process calibration requirements.
Pressure calibration pump / hydraulic - 700 bar | 700HTP
This hydraulic test pump was designed to generate pressures of up to 700 bar (or 10,000 psi). In addition, there are...
Pressure calibration pump / hydraulic - 700 bar | 700HTP
This hydraulic test pump was designed to generate pressures of up to 700 bar (or 10,000 psi). In addition, there are two pressure ports attached to the design of this item.
First of all, the 3/80BSP (ISO228) female parallel thread fitting is suitable for the pressure module or the reference gauge. The 1/8BSP (ISO228) female parallel thread is suitable for the unit under test. Note that, users must provide a hose to the unit under test, from the port.
First of all, the 3/80BSP (ISO228) female parallel thread fitting is suitable for the pressure module or the reference gauge. The 1/8BSP (ISO228) female parallel thread is suitable for the unit under test. Note that, users must provide a hose to the unit under test, from the port.