+7 (812) 645-08-06
Insulation measuring devices, hipot testers
select brand
Tester / Franklin tester - FT 510
The FT 510 is an insulation resistivity tester or franklin tester which measures surface resistance in coated electrical steel material. It prepares and executes measuring processes...
Tester / Franklin tester - FT 510
The FT 510 is an insulation resistivity tester or franklin tester which measures surface resistance in coated electrical steel material. It prepares and executes measuring processes...
Measuring device - 0 - 500 kΩ, 0.5 - 5 MΩ | MEG-1000
The MEG-1000 is an insulation resistance tester with a backlit LCD display. It provides measurements of insulation MΩ, continuity Ω and AC voltage readings....
Measuring device - 0 - 500 kΩ, 0.5 - 5 MΩ | MEG-1000
The MEG-1000 is an insulation resistance tester with a backlit LCD display. It provides measurements of insulation MΩ, continuity Ω and AC voltage readings. The tester is equipped with a red LED indicator for checking of the insulation and continuity. A carrying case is also provided with this tester to protect it while being transported. The MEG-1000 is specifically made to provide measurements of the insulating resistance of domestic electrical appliances and for distribution of energy lines and installations. A cable of the conductor insulation test is provided as well as a cable of the insulation test against the body of an appliance.
Grounding test equipment - max. 50 A | GETEST series
MPC-5/50 is a GETEST unit that for measuring the voltage differences between ground points, conductive parts or earth. If users notice leakage currents through earth, this item will come in handy. In certain countries, these...
Grounding test equipment - max. 50 A | GETEST series
MPC-5/50 is a GETEST unit that for measuring the voltage differences between ground points, conductive parts or earth. If users notice leakage currents through earth, this item will come in handy. In certain countries, these measurements are compulsory when it comes to distribution centers and substations, as required by various standards that were recently introduced. Note that the tests can be carried out by connecting the current generation systems between various points, which are far from an earth line.
It is possible to measure voltage between the two weights that are a meter apart, while the current source is adjusted to the desired value with a PDA, being able to display and store the data measured. The forward and contact voltage measuring is based on the current injection during a grid cycle, while the item provides up to 50A, with a load of 12ohm.
It is possible to measure voltage between the two weights that are a meter apart, while the current source is adjusted to the desired value with a PDA, being able to display and store the data measured. The forward and contact voltage measuring is based on the current injection during a grid cycle, while the item provides up to 50A, with a load of 12ohm.
Hipot tester - OT2 series
The OT2-60D is ideally designed to provide a good quality performance and functionality for very specific purposes. It is an automatic device which is mainly constructed to perform a...
Hipot tester - OT2 series
The OT2-60D is ideally designed to provide a good quality performance and functionality for very specific purposes. It is an automatic device which is mainly constructed to perform a...
Grounding test equipment - TL-5 series
TL-5 is an earth resistance meter that is delivered in the form of a digital instrument, which is controlled by a microprocessor. In addition to this, the item has been designed to take earth resistance and resistivity measurements, using...
Grounding test equipment - TL-5 series
TL-5 is an earth resistance meter that is delivered in the form of a digital instrument, which is controlled by a microprocessor. In addition to this, the item has been designed to take earth resistance and resistivity measurements, using the Wenner method. The TL-5 unit is also known for being automatic and easy to use, while also controlling the conditions of installation before taking a reading, checking that these are within the limits. The product is then able to notify the user in the case of an abnormal situation occuring, such as very low test current intensity, high interference voltages and others.
Customers can use the TL-5 for selecting two frequencies, hence generating the test current, optimizing the earthing test. The instrument was also especially designed for monitoring earthing systems when it comes to industries, substations, energy distributions and grids in accordance to IEC 61557-5 standards.
Customers can use the TL-5 for selecting two frequencies, hence generating the test current, optimizing the earthing test. The instrument was also especially designed for monitoring earthing systems when it comes to industries, substations, energy distributions and grids in accordance to IEC 61557-5 standards.
Insulation monitor - ISO-CHECK
The ISO-CHECK is the array of IMD equipments designed for constant monitoring of insulation...
Insulation monitor - ISO-CHECK
The ISO-CHECK is the array of IMD equipments designed for constant monitoring of insulation resistance for isolated AC networks. It is also suitable for calculating the resistance level of isolated photovoltaic (PV) setups and other setups used for energizing electric motors. This device is designed with a panel mounting that is based on the DIN rail format.
Insulation monitor for PV applications - 600 - 1 000 V | ISO-CHECK PV
The ISO-CHECK PV 1000 Series, manufactured by CPT Cirprotec, is an IMD insulation...
Insulation monitor for PV applications - 600 - 1 000 V | ISO-CHECK PV
The ISO-CHECK PV 1000 Series, manufactured by CPT Cirprotec, is an IMD insulation monitoring device equipped with wiring diagrams. It has a nominal voltage that ranges from 500 up to 1000 V DC, dimensions of 105 x 127 x 90 mm, and protection class of IP 20. This device is designed for application in DC auxiliary circuits.