+7 (812) 645-08-06
Thermal analyzers: DSC, TGA, TMA, thermal conductivity analyzers
select brand
Thermal conductivity analyzer - A5000T
The A5000T model is manufactured by Mae, and is a thermal conductivity analyzer that is intended to measure the heat transmission of the ground. It is commonly utilized to install...
Thermal conductivity analyzer - A5000T
The A5000T model is manufactured by Mae, and is a thermal conductivity analyzer that is intended to measure the heat transmission of the ground. It is commonly utilized to install the underground cable ducts, or prior to build the geo-thermic wells to detect the heat from the ground in heating or building conditions.
The unit has a resolution of 24 bits, and has a maximum distortion of 0.0005% . It has maximum sampling of 0.3 Hz, which has a measuring type that is conforming to ASTM D 5334.
The conductivity probe has a specific resistance of 83 Ω/m, which has a clock that is integrated with a backup battery. It has a monochrome LCD display with a resolution of 320x240 pixel.
The unit has a resolution of 24 bits, and has a maximum distortion of 0.0005% . It has maximum sampling of 0.3 Hz, which has a measuring type that is conforming to ASTM D 5334.
The conductivity probe has a specific resistance of 83 Ω/m, which has a clock that is integrated with a backup battery. It has a monochrome LCD display with a resolution of 320x240 pixel.
Thermo-differential analyzer / thermal - DTA PT1600
The DTA PT1600 Series , manufactured by Linseis®, is a high temperature differential thermal analysis constructed to provide immense sensitivity of calorimetric, a constant short time...
Thermo-differential analyzer / thermal - DTA PT1600
The DTA PT1600 Series , manufactured by Linseis®, is a high temperature differential thermal analysis constructed to provide immense sensitivity of calorimetric, a constant short time...
Thermomechanical analyzer - TMA PT 1000
The LINSEIS TMA PT1000 Thermomechanical Analyzer is designed with reproducibility, accuracy and high-precision in mind. This system meets all TMA/DTMA requirements and is capable of performing a range of thermomechanical experiments on samples of varying shapes and sizes and...
Thermomechanical analyzer - TMA PT 1000
The LINSEIS TMA PT1000 Thermomechanical Analyzer is designed with reproducibility, accuracy and high-precision in mind. This system meets all TMA/DTMA requirements and is capable of performing a range of thermomechanical experiments on samples of varying shapes and sizes and in a wide temperature range. The integrated force/frequency generator permits carrying out of both static and dynamic measurements. This unit is intended for use with composite materials, glass, polymers, ceramics and metals of various geometric shapes including: fibers, rods, films, rods and cylinders. When operating with low constant load, this unit features linear thermal expansion evaluation, volume change, phase transformation, sinter process evaluation, softening point determination, transformation points, swelling behavior and tension. When working with increased constant load, it features penetration, transition and comparison tests and 3 point bending test, while the dynamic load features visco-elastic behavior. Additionall options include, DTA evaluation and RCS (rate controlled sintering software).
Thermomechanical analyzer - TMA PT 1600
TMA PT 1600 is a Thermomechanical analyzer manufactured by Linseis. This device is crafted to perform a wide array of Thermomechanical experiments from shapes, sizes and temperature. In constant load...
Thermomechanical analyzer - TMA PT 1600
TMA PT 1600 is a Thermomechanical analyzer manufactured by Linseis. This device is crafted to perform a wide array of Thermomechanical experiments from shapes, sizes and temperature. In constant load it can conduct linear thermal expansion evaluation, change of volume, phase transformation, sinter process evaluation etc. It uses up to 1/5.7/20 N of force, 1Hz and is capable of text editing, data security in case of power failure and also a thermocouple break protection in multi-methods analysis (DSC TG, TMA, DIL, etc.) which is connected in a USB cable. It also have softening point detection with automatic software controlled system shut down, display of relative/absolute shrinkage or expansion curves and presentation and calculation of technical / physical expansion coefficient.
Thermal analyzer / TMA / DSC / thermo-differential - TGA PT1000
The updated Linseis TGA PT1000 is especially designed for thermogravimetric applications. It is a toploading Thermobalance that provides a highly user-friendly design.
The tara is made electronically, even at a sample weight of up to 5g. The...
The tara is made electronically, even at a sample weight of up to 5g. The...
Thermal analyzer / TMA / DSC / thermo-differential - TGA PT1000
The updated Linseis TGA PT1000 is especially designed for thermogravimetric applications. It is a toploading Thermobalance that provides a highly user-friendly design.
The tara is made electronically, even at a sample weight of up to 5g. The...
The tara is made electronically, even at a sample weight of up to 5g. The...
Thermogravimetric analyzer - TGA PT 1600
The TGA PT1600 from Linseis, is a thermobalance for thermogravimetric applications like thermal composition, thermal stability and oxidation studies. The tara...
Thermogravimetric analyzer - TGA PT 1600
The TGA PT1600 from Linseis, is a thermobalance for thermogravimetric applications like thermal composition, thermal stability and oxidation studies. The tara is done electronically at a sample weight of up to 5/25g. The specially designed furnaces allow fast heating and cooling rates as well as a highly precise temperature control. It provides an ease of operation to the operator. Plus, it is available with an optional calculated DTA signal for supplementary information on endothermal and exothermal reactions, as well as for temperature adjustment. It can also be provides with different types of vacuum and turbo molecular pumps.
Thermogravimetric analyzer - FC-TGA-S
The FC-TGA-S is a Thermogravimetric analyzer (TGA) designed for industries such as electrical power, coal, commerce inspection, environment protection, metallurgy, papermaking, petrochemical, earth probe...
Thermogravimetric analyzer - FC-TGA-S
The FC-TGA-S is a Thermogravimetric analyzer (TGA) designed for industries such as electrical power, coal, commerce inspection, environment protection, metallurgy, papermaking, petrochemical, earth probe and the research institute or quality inspecting organization. it is ideal for testing the content of air-dry basis moisture, ash, LOI, and Volatile Matter in the coal. The device automatically calculates Calorific Value and the content of fixed carbon and hydrogen in the samples. Through the three temperature grade, double furnace configuration the instrument can work in parallel , and hence to reduce the testing time and the constant temperature area in the furnaces do not interfere with each other and so the testing accuracy of air-dry basis moisture, ash, and Volatile Matter can be ensured.