+7 (812) 645-08-06
Tunnel boring machines, Tunneling equipment
select brand
Tunnel boring machine
Full-face TBM
Earth pressure balance or slurry shield
Tunnel boring machines in difficult terrains under heavy hydrostatic pressure.
Earth pressure balance or slurry shield
Tunnel boring machines in difficult terrains under heavy hydrostatic pressure.
Tunnel boring machine boom-type heading
The boom-type heading TBM with compressed air
Suitable for urban environmental constraints (curved alignment, likehood of meeting obstacles, varying grounds).
Suitable for urban environmental constraints (curved alignment, likehood of meeting obstacles, varying grounds).
Microtunneling boring machine
Micro Tunnel Boring Machine (MTBM)
The MTBM is an economical and reliable solution for construction small diameter underground networks by trenchless method.
The MTBM is an economical and reliable solution for construction small diameter underground networks by trenchless method.
Back-up system for tunnel boring machine
For huge facilities / civil works construction activities and for the precast yards, Cimolai Technology can design and perform turn-key supplies of the following equipment:
- Mobile straddle transporters for handling and transporting precast components and reinforced concrete...
- Mobile straddle transporters for handling and transporting precast components and reinforced concrete...
Back-up system for tunnel boring machine
For huge facilities / civil works construction activities and for the precast yards, Cimolai Technology can design and perform turn-key supplies of the following equipment:
- Mobile straddle transporters for handling and transporting precast components and reinforced concrete elements / beams
- Special portal cranes, on rail or on tires
- Shaft cranes, at high performances and long lifting travels. They are usually employed on dams and in drilling yards, during the manufacture of shafts and tunnels.
- Launching gantries for the manufacture of bridges made of reinforced concrete/steel elements/beams. The launching gantries can be of suspended elements/beams, for placed elements/beams or for in-situ cast (self-advancing molds).
- Derrick cranes for manufacturing cable-stayed bridges made of either steel or reinforced concrete and for lifting beams or beam segments
- Self propelled flat beds (or lowered trailers) for the transportation of elements or steel/concrete beams
Other special equipment can be designed and fabricated to comply with specific requirements from the Customer.
- Mobile straddle transporters for handling and transporting precast components and reinforced concrete elements / beams
- Special portal cranes, on rail or on tires
- Shaft cranes, at high performances and long lifting travels. They are usually employed on dams and in drilling yards, during the manufacture of shafts and tunnels.
- Launching gantries for the manufacture of bridges made of reinforced concrete/steel elements/beams. The launching gantries can be of suspended elements/beams, for placed elements/beams or for in-situ cast (self-advancing molds).
- Derrick cranes for manufacturing cable-stayed bridges made of either steel or reinforced concrete and for lifting beams or beam segments
- Self propelled flat beds (or lowered trailers) for the transportation of elements or steel/concrete beams
Other special equipment can be designed and fabricated to comply with specific requirements from the Customer.
Tunnel boring machine - SEGMENT TRANSFER SYSTEM
Per la realizzazione di grandi infrastrutture ed opere civili e nell’ambito dei cantieri di prefabbricazione, Cimolai Technology è in grado di progettare e fornire, chiavi in mano, le seguenti attrezzature:
- Carrelloni gommati per la movimentazione ed il trasporto di elementi precompressi, conci e travi...
- Carrelloni gommati per la movimentazione ed il trasporto di elementi precompressi, conci e travi...
Tunnel boring machine - SEGMENT TRANSFER SYSTEM
Per la realizzazione di grandi infrastrutture ed opere civili e nell’ambito dei cantieri di prefabbricazione, Cimolai Technology è in grado di progettare e fornire, chiavi in mano, le seguenti attrezzature:
- Carrelloni gommati per la movimentazione ed il trasporto di elementi precompressi, conci e travi...
- Carrelloni gommati per la movimentazione ed il trasporto di elementi precompressi, conci e travi...
Guided boring machine (GBM) - ø 102 - 1 219 mm
Akkerman’s Guided Boring Machine (GBM) method, also known as pilot tube microtunneling, offers customers extended and accurate drive lengths in various ground conditions. The GBM provides the spoil removal...
Guided boring machine (GBM) - ø 102 - 1 219 mm
Akkerman’s Guided Boring Machine (GBM) method, also known as pilot tube microtunneling, offers customers extended and accurate drive lengths in various ground conditions. The GBM provides the spoil removal process of the auger boring machine and the same level of accuracy as traditional microtunneling—all in one compact, multifaceted system. The pipe installation involves a three-step process where launch and reception shafts are strategically located to minimize surface disruption. Three robust jacking frame configurations are available to meet contractor’s needs. Akkerman GBMs are used in conjunction with a theodolite guidance system to provide accurate pipe installation. Akkerman manufactures GBMs for installation of pipe in the 4" - 48" (102 - 1,219 mm) OD range in displaceable soil under 50 blow count.
Guided boring machine (GBM) - max. ø 610 mm | 240A
The 240A is a single stage long frame with a 48” (1,219 mm) stroke cylinder for smooth continuous...
Guided boring machine (GBM) - max. ø 610 mm | 240A
The 240A is a single stage long frame with a 48” (1,219 mm) stroke cylinder for smooth continuous...
Guided boring machine (GBM) - max. ø 762 mm | 308A, 339A
The 308A/339A latching frames allows operators to install up to 30-inch OD (762 mm) pipe from an 8 or 9-foot (2.4/2.7 m) minimal diameter shaft.
Guided boring machine (GBM) - max. ø 1 016 mm | 48 series
Operators using a GBM 48 Series jacking frame have precision, two-speed advancement control options through the gear box for installing GBM tooling. The 100-ton fast and 265-ton slow advance speeds with 100-tons...
Guided boring machine (GBM) - max. ø 1 016 mm | 48 series
Operators using a GBM 48 Series jacking frame have precision, two-speed advancement control options through the gear box for installing GBM tooling. The 100-ton fast and 265-ton slow advance speeds with 100-tons of pull-back force give operators complete control over GBM accessories. The rotational torque operates in two ranges of force, 0-10,500-ft-lbs. and 0-26,000-ft-lbs. to match the tooling requirements. Each torque range offers two speed options with 35 and 50-rpms in the low torque and 23 and 35-rpms in the high torque settings. The GBM 48 series frames are able to install up to 48" (1,219 mm) OD pipe in 8' (2.4 m) lengths. Frames extensions for 10 and 20' (3,6 m) pipe lengths are available. The frame's 7.5" (191 mm) cylinders either have a 30" (762 mm) or 40" (1,016 mm) stroke, and latch on center every 12" (305 mm).
Boring head - ø 406 mm | Eliminator
FEATURES
The Eliminator is ihe lead pilot lool for non-displaceable ground conditions.
Cutter head cutting teeth rotate through the ground at a full 17.5 (445 mm) OD.
Three independent steering eontrol de...
The Eliminator is ihe lead pilot lool for non-displaceable ground conditions.
Cutter head cutting teeth rotate through the ground at a full 17.5 (445 mm) OD.
Three independent steering eontrol de...
Boring head - ø 406 mm | Eliminator
FEATURES
The Eliminator is ihe lead pilot lool for non-displaceable ground conditions.
Cutter head cutting teeth rotate through the ground at a full 17.5 (445 mm) OD.
Three independent steering eontrol de...
The Eliminator is ihe lead pilot lool for non-displaceable ground conditions.
Cutter head cutting teeth rotate through the ground at a full 17.5 (445 mm) OD.
Three independent steering eontrol de...