+7 (812) 645-08-06
Motion controllers
select brand
Stepper motor motor controller / servo - 50 W | PS 10 series
The PS 10 is a solo-axis control unit which is arranged for two-phase direct current servo motors or step motors. It can be distributed in a networking edition which is derived from CANbus system, to manage several PS 10 control units jointly....
Stepper motor motor controller / servo - 50 W | PS 10 series
The PS 10 is a solo-axis control unit which is arranged for two-phase direct current servo motors or step motors. It can be distributed in a networking edition which is derived from CANbus system, to manage several PS 10 control units jointly. Thus, a multipoint association with a high transport rate equal to 32 appliances is achievable. Micro-step form with step motors through software promises even running and high resolution. Using this tuning, a motor action equal to 128 micro steps for each complete step is probable. The control unit PS 10 is worked and planned by a computer, through a Universal Serial Bus 2.0 interface. This is compatible with Windows XP and 2000 and allows a fast data transmit. A lot of inputs and outputs similar to Transistor–transistor logic, analogue and SPS (two while PWM in PS 10 to 32 arranged) are put into practice for contact with dissimilar peripherals. PS 10 for direct current servo motor supports the full A/B-Index, as...
Stepper motor motor controller / servo - PS 35 series
The PS 35 from Owis is a universal position control unit that features a USB and an RS 232 interface characterized by an 8 TTL / analog input...
Stepper motor motor controller / servo - PS 35 series
The PS 35 from Owis is a universal position control unit that features a USB and an RS 232 interface characterized by an 8 TTL / analog input including inputs that are applicable also for the encoder. The product consists of a table top LCD controls with a micro step mode which can measure up to 1/256 with a 2 configurable limit switch inputs per axis along with a 5 TTL and 2 power outputs. Furthermore, the PS 35 is operated by a PC that is capable of providing its users a point-to-point positioning in trapeze or S-curve velocity-time outlines.
Piezoelectric unit motion controller - 24 V, 2 A | E-861 PiezoWalk® NEXACT® series
The all-new E-861 controller is compatible with both motion modes of the PiezoWalk® stepping drive:...
Piezoelectric unit motion controller - 24 V, 2 A | E-861 PiezoWalk® NEXACT® series
The all-new E-861 controller is compatible with both motion modes of the PiezoWalk® stepping drive:...
Single shaft motion controller - 24 VDC, 10 W | E-753 series
The outcome of PI's over 30 years of expertise with piezo motion control systems is the...
Single shaft motion controller - 24 VDC, 10 W | E-753 series
The outcome of PI's over 30 years of expertise with piezo motion control systems is the next-generation's E-753 digital piezo controller, replacing the E-750 controller. It is the best when it complies in satisfying he toughest and most challenging accuracy and active-performance demands of nanopositioning systems of the optimum precision class.
Multi-axis motion controller - 24 VDC, 70 W | E-725
E-725 Digital Piezo Controller is a compact, high-speed, precise nanopositioning system that has capacitive sensors and up to three axes. Piezo systems with direct drive or large scans...
Multi-axis motion controller - 24 VDC, 70 W | E-725
E-725 Digital Piezo Controller is a compact, high-speed, precise nanopositioning system that has capacitive sensors and up to three axes. Piezo systems with direct drive or large scans can also be scanned dynamically due to the powerful amplifiers. Operating parameters are optimized with the new and advanced processor technology, which result in improved linear characteristics and better tacking accuracy.
Nanopositioning refers to positioning with utmost accuracy at the nano level, which is truly achieved thanks to the high-resolution D/A converters. One or more axes are assigned the input voltage. Processing of the external sensor or control signals is made possible through four analog interfaces.
Nanopositioning refers to positioning with utmost accuracy at the nano level, which is truly achieved thanks to the high-resolution D/A converters. One or more axes are assigned the input voltage. Processing of the external sensor or control signals is made possible through four analog interfaces.
Piezoelectric unit motion controller - C-702
The C-702 Hybrid System Controller is a high velocity-constancy for nanometer-precision hybrid DC/Piezo nanopositioning systems which is made for precision...
Piezoelectric unit motion controller - C-702
The C-702 Hybrid System Controller is a high velocity-constancy for nanometer-precision hybrid DC/Piezo nanopositioning systems which is made for precision control of the M-511.HD and M-714 nanopositioning stages. This is used for high loads that can keep up a motion profile with nanometer position accuracy and high constancy of velocity. Both are based upon the PI hybrid drive technology which incorporates piezoelectric and motorized drive components that results to one motion and servo-control system. This can be applied on: surface inspection, microscopy, laser technology, interferometry and metrology.
Servo motor controller / for stepper motors - 15 - 30 V | C-663 Mercury™
The C-663 Mercury Step Controller from PIEZO provides services with multi-axis control through 16 mercury class controllers...
Servo motor controller / for stepper motors - 15 - 30 V | C-663 Mercury™
The C-663 Mercury Step Controller from PIEZO provides services with multi-axis control through 16 mercury class controllers that can be handled by a computer at a time. It has a versatile and cost-efficient automation option that can facilitate programming through high-level mnemonic language and macro compound-command functionality. This product is also user-friendly.
The C-663 is capable of 1/16 fullstep microstepping that produces flawless high-quality motion.
The C-663 is capable of 1/16 fullstep microstepping that produces flawless high-quality motion.
3 axis motion controller / USB / high-performance / compact - ESP301 series
The 3 - Axis Motion Controller and Driver, ESP301 Series represents successor of the popular ESP300 motion controller, with similar functionality as the ESP300 but includes supplemental, standard USB interface and extended...
3 axis motion controller / USB / high-performance / compact - ESP301 series
The 3 - Axis Motion Controller and Driver, ESP301 Series represents successor of the popular ESP300 motion controller, with similar functionality as the ESP300 but includes supplemental, standard USB interface and extended front panel functions. ESP301 features similar motion commands, control algorithms and casing as that of ESP300 to ensure maximum backward compatibility. The ESP301 is capable to drive and control up to three axes of motion with a combination of DC or 2-phase stepper motors up to 3A per axis. This enables driving a large selection of Newport stages and actuators. The SMC100CC and SMC100PP are single axis motion controllers/drivers for DC servo motors (SMC100CC) and 2-phase stepper motors (SMC100PP) with up to 48 VDC at 1.5 A rms. They provide very compact and low-cost solution for driving most of Newport's stages