+7 (812) 645-08-06
Motion controllers
select brand
Motion controller - 5 - 12 V, 3 - 10 A
FAULHABER Motion Controllers are convenient single-axis positioning controllers that are specifically designed to navigate FAULHABER...
Motion controller - 5 - 12 V, 3 - 10 A
FAULHABER Motion Controllers are convenient single-axis positioning controllers that are specifically designed to navigate FAULHABER DC and brushless linear motors. They include serial or controller area network CAN interfaces that can be configured by the user-friendly Motion Manager Software which results in dynamic positioning applications or high precision speed control applications.
Additional features consist of various standard operating models, and combined motor protection with a sleek design.
Additional features consist of various standard operating models, and combined motor protection with a sleek design.
Motion controller - MSC II
Moog's new MSCII Servo controllers are made available PLC function for ease in programming. This top-quality device features a 400 MHz CPU, a 32 MB Flash EEPROM expandable...
Motion controller - MSC II
Moog's new MSCII Servo controllers are made available PLC function for ease in programming. This top-quality device features a 400 MHz CPU, a 32 MB Flash EEPROM expandable 128 MB RAM memory, a configurable 4 x SSI or incremental encoder position transcoder interface, a TCP/IP and UDP/IP ethernet data exchange function, as well as a standard bus interface. These capabilities together with the 100-microsecond base tick minimum task cycle time enable this instrument to be efficiently and effectively utilized for a wide array of applications. This Servo controller is ideal for applications that involve closed-loop controls, multiple axes and more.
Rugged motion controller - IP67 |M3000 series
Along with its ruggedized design containing IP67, 30 g vibration, 50 g shock, the Moog Ruggedized Motion Controller performs high functionality obtaining a complete programming with its Moog Axis...
Rugged motion controller - IP67 |M3000 series
Along with its ruggedized design containing IP67, 30 g vibration, 50 g shock, the Moog Ruggedized Motion Controller performs high functionality obtaining a complete programming with its Moog Axis Control Software in accordance to IEC 61131. This controller is applicable for the environment where the fieldbus interface should control the multiple axes.
This Moog Ruggedized Motion Controller has a fast start-up commissioning because of its flexible hardware and durable software. It can integrate through multiple connectivity options rapidly. It also offers the higher productivity with lesser time. and it is convenient to remote servicing and debugging.
This controller has libraries and program that enables the user to solve problems quickly.
This Moog Ruggedized Motion Controller has a fast start-up commissioning because of its flexible hardware and durable software. It can integrate through multiple connectivity options rapidly. It also offers the higher productivity with lesser time. and it is convenient to remote servicing and debugging.
This controller has libraries and program that enables the user to solve problems quickly.
Expansion module - QAIO series
Analog module features 16 bit resolution of the inputs and outputs. All inputs and outputs are updated at every program cycle of the MSC I or MSC II. The minimum cycle time...
Expansion module - QAIO series
Analog module features 16 bit resolution of the inputs and outputs. All inputs and outputs are updated at every program cycle of the MSC I or MSC II. The minimum cycle time...
Expansion module - 24 V, 0.5 A | QDIO series
Modules for for MSC I and MSC II are digitally extendable and include 16 inputs and 16 inputs/outputs....
Expansion module - 24 V, 0.5 A | QDIO series
Modules for for MSC I and MSC II are digitally extendable and include 16 inputs and 16 inputs/outputs. The device comes mounted on a DIN top-hat rail and its additional features include inputs/outputs that are configurable as input/output, ominal current of outputs such as 0.5A overload and short current protection, and MSC I or MSC II via internal extension bus.
Expansion module - QEBUS-CAN
The CAN/CANopen extension module are made to work with a second CAN controller on an MSC I or II. This can...
Expansion module - QEBUS-CAN
The CAN/CANopen extension module are made to work with a second CAN controller on an MSC I or II. This can be made to create two separate CAN networks and can use connectors on the first controller on the front cover of the MSC unit. This is also useful for being mounted on a DIN top-hat rail and can be linked to an MSC unit on an inside extension bus. The CAN in this case refers to the Controller Area Network.
Positioning controller - 10 A, 11 - 70 VDC, max. 700 W | EPOS3 70/10
Used with permanent-magnet activated brushed DC or brushless DC motor and Hall sensors...
Positioning controller - 10 A, 11 - 70 VDC, max. 700 W | EPOS3 70/10
Used with permanent-magnet activated brushed DC or brushless DC motor and Hall sensors and encoder up to 700 watts, the EPOS2 70/100 is one of the positioning controllers providing a wide range of operating modes together with various command interfaces. It enables versatile use in a broad range of drive systems in automation and mechatronics.
Positioning controller - 5 A, 11 - 50 VDC, 5 - 250 W | EPOS2 50/5
Used with permanent-magnet activated brushed DC or brushless DC motor and Hall sensors...
Positioning controller - 5 A, 11 - 50 VDC, 5 - 250 W | EPOS2 50/5
Used with permanent-magnet activated brushed DC or brushless DC motor and Hall sensors and encoder, the EPOS2 50/5 is one of the positioning controllers providing a comprehensive range of operating modes together with the various command interfaces. It enables versatile use in a broad range of drive systems in automation and mechatronics.
Positioning controller - 2 A, 11 - 36 VDC, max. 72 W | EPOS2 Module 36/2
Maxon motors offer a wide range of controllers, and among these is the EPOS2...
Positioning controller - 2 A, 11 - 36 VDC, max. 72 W | EPOS2 Module 36/2
Maxon motors offer a wide range of controllers, and among these is the EPOS2 Module 36/2, an OEM positioning controller plug in that operates with power supplies from 11 - 36 V. This is ideally used for operations with brushed DC motors with encoder or brushless EC motors with encoders and Hall sensors.
Positioning controller - 5 A, 11 - 24 VDC, 5 - 120 W | EPOS2 24/5
The EPOS 24/5, matched with brushed DC motors, is a modular digital positioning controller....
Positioning controller - 5 A, 11 - 24 VDC, 5 - 120 W | EPOS2 24/5
The EPOS 24/5, matched with brushed DC motors, is a modular digital positioning controller. Its DC motors feature an encoder or brushless EC motors with Halls sensors and encoder from 5 - 120 watts. The EPOS2 24/5 provides a performance encompassing data and specifications, information on connections and pin assignment and wiring examples.
Positioning controller - 10 A, 11 - 70 VDC, 80 - 700 W | EPOS2 70/10
EPOS2 70/10 controller is designed in a comprehensive modular digital positioning scheme....
Positioning controller - 10 A, 11 - 70 VDC, 80 - 700 W | EPOS2 70/10
EPOS2 70/10 controller is designed in a comprehensive modular digital positioning scheme. This switch is complemented ideally by high-speed DC or EC motor. Furthermore, a digital encoder supports its motor providing a reasonable cycle count and keeps a monitoring task by recording the position data to be executed by the controller.