+7 (812) 645-08-06
Motion control cards
select brand
Multi-axis motion control card - max. 100 axes, 51.9 x 40.6 x 18.1 mm | Gold Lion
The Gold Lion series , manufactured by Amer®, Elmo is a multi-axis controller for harsh environment utilized with a...
Multi-axis motion control card - max. 100 axes, 51.9 x 40.6 x 18.1 mm | Gold Lion
The Gold Lion series , manufactured by Amer®, Elmo is a multi-axis controller for harsh environment utilized with a...
Multi-axis motion control card / servo / stepper - max. 266 MHz | MAXk series
The MAXk series is manufactured by Pro-Dek, and is a PCI bus-based motion controller that has the capacity to accommodate up to...
Multi-axis motion control card / servo / stepper - max. 266 MHz | MAXk series
The MAXk series is manufactured by Pro-Dek, and is a PCI bus-based motion controller that has the capacity to accommodate up to 10 axes of user-definable servo and stepper motion control. Each axis of the MAXk controller can be modified, and used as either a servo, or an open/closed loop stepper. The device is embedded on a PowerPC 32-bit RISC processor that runs at 226 MHz.
The model has an accuracy for point-to-point moves at +/-0 counts, and it has the capacity to compensate any backlash.
The model has an accuracy for point-to-point moves at +/-0 counts, and it has the capacity to compensate any backlash.
Multi-axis motion control card / advanced / programmable - max. 4 MHz | PCIx series
The PCIx series, manufactured by Pro-Dex, Oregon Micro Systems, is an advanced multi-axis...
Multi-axis motion control card / advanced / programmable - max. 4 MHz | PCIx series
The PCIx series, manufactured by Pro-Dex, Oregon Micro Systems, is an advanced multi-axis programmable motion control card. It is equipped with two or four axes which support both servo as well as stepper applications. This series can handle frequencies up to 4 MHz. It also offers electronic gearing, circular interpolation and backlash compensation.
Multi-axis motion control card - VME/VME64, 16 MHz | MAXv Series
The product is a motion controller, MAXv. It is used for motion control of a stepper and/or motor control with the help of the VME/VME64 8 axis motion controller. Connectivity can be done by both, VME/VME64 bus P2 connector, as well as connectors on the front pane....
Multi-axis motion control card - VME/VME64, 16 MHz | MAXv Series
The product is a motion controller, MAXv. It is used for motion control of a stepper and/or motor control with the help of the VME/VME64 8 axis motion controller. Connectivity can be done by both, VME/VME64 bus P2 connector, as well as connectors on the front pane....
Multi-axis motion control card / servo / stepper - Ethernet / RS232, 1-5 axis | MAXnet series
The MAXnet 5-axis motion controller for stepper plus servo motor control utilizes a single 4 x 6.5" card, complete with either an Ethernet and/or a RS232 communications interface. Operators can set...
Multi-axis motion control card / servo / stepper - Ethernet / RS232, 1-5 axis | MAXnet series
The MAXnet 5-axis motion controller for stepper plus servo motor control utilizes a single 4 x 6.5" card, complete with either an Ethernet and/or a RS232 communications interface. Operators can set each axis to be an open or closed stepper, or a servo axis, and the unit supports 16 bit analog servo outputs plus step and direction system applications.
A PID filter servo loop is utilized, complete with feed-forward coefficients plus and update rate of 122ms on the 5 axis. Buyers can also choose to implement an additional 8 User Definable I/O for the synchronization and controlling of other events. All servo axis utilize single ended or differential incremental encoder feedback, which is available to use for position feedback but can also be used for slip or stall detection.
A PID filter servo loop is utilized, complete with feed-forward coefficients plus and update rate of 122ms on the 5 axis. Buyers can also choose to implement an additional 8 User Definable I/O for the synchronization and controlling of other events. All servo axis utilize single ended or differential incremental encoder feedback, which is available to use for position feedback but can also be used for slip or stall detection.
Multi-axis motion control card / stepper / servo - PC/104, RS232 | PC78 Series
The PC78 Multi-Axis Motion Controller is equipped with 4 axes of stepper control with encoder feedback or servo control. The encoder feedback functionality supports quadrature encoders up to 12 MHz at a 4 times the encoder...
Multi-axis motion control card / stepper / servo - PC/104, RS232 | PC78 Series
The PC78 Multi-Axis Motion Controller is equipped with 4 axes of stepper control with encoder feedback or servo control. The encoder feedback functionality supports quadrature encoders up to 12 MHz at a 4 times the encoder line resolution and is used as closed-loop feedback for the servo and stepper axes or as independent position feedback. The encoder feedback can provide slip and/or stall detection with programmable dead-band. Each axis includes dedicated +/- over-travel inputs, a home input, and an auxiliary output. The controller measures 3.5"x3.75" for compact applications. This product provides a patented technology to minimize torque ripple and velocity modulation and has an internal watchdog timer for safety. The PC78 was designed for expandability and incorporates an external board-to-board connector for custom daughter board development.
Motion control card - 200 W, 80 V, 5 A, CAN, CANopen | ISCM4805, ISCM8005 series
Intelligent servo control modules ISCM4805/ISCM8005 facilitate high performance by collaborating PLC functionality, motion controller and drive in just a single and compact unit. These ISCM modules are quite flexible and cost effective. They provide compact...
Motion control card - 200 W, 80 V, 5 A, CAN, CANopen | ISCM4805, ISCM8005 series
Intelligent servo control modules ISCM4805/ISCM8005 facilitate high performance by collaborating PLC functionality, motion controller and drive in just a single and compact unit. These ISCM modules are quite flexible and cost effective. They provide compact solutions to coordinated and distributed control of DC, brush-less, step or linear motors. Maximum power of 240W and maximum voltage of 80V is facilitated.
It is programmable with high level Technosoft Motion Language. 2 phase motors are provided for the brush-less AC(vector control) & DC, linear and DC brush. It is in the credit card format with compact open frame of 70x50(mm). DIN rail version is also available. Various control modes like speed, position, torque, electronic gearing, profiling, contouring, step motor emulation and external variable control like flow, temperature, pressure, etc. There is master and slave mode to facilitate single or multi-axis control. With the help of stored motion sequences it possess a feature of standalone.
It is programmable with high level Technosoft Motion Language. 2 phase motors are provided for the brush-less AC(vector control) & DC, linear and DC brush. It is in the credit card format with compact open frame of 70x50(mm). DIN rail version is also available. Various control modes like speed, position, torque, electronic gearing, profiling, contouring, step motor emulation and external variable control like flow, temperature, pressure, etc. There is master and slave mode to facilitate single or multi-axis control. With the help of stored motion sequences it possess a feature of standalone.
Multi-axis motion control card / high-performance - 150 W, 48 V, 3 A, CAN, CANopen | ISM4803
The superior performance ISM4803 Intelligent Servo Module features a compact unit imbibed with motion controller, drive and PLC functionality. The module proves a flexible, economical solution especially for distributed and coordinated control of brushless,...
Multi-axis motion control card / high-performance - 150 W, 48 V, 3 A, CAN, CANopen | ISM4803
The superior performance ISM4803 Intelligent Servo Module features a compact unit imbibed with motion controller, drive and PLC functionality. The module proves a flexible, economical solution especially for distributed and coordinated control of brushless, DC or step motors of powers up to 150 W, with up to 48 V voltages. ISM4803 is programmable with the high-level Technosoft Motion Language (TML) and embeds, on a single board, advanced motion control and basic PLC-specific functionality.
The device features fully digital servo amplifier with embedded intelligence & PLC functionality and proves suitable for brushless DC, brushless AC (vector control), DC brush, and 2-phase or 3-phase step motors. The module with compact open frame design (64 x 104 x 16 mm) in card format can be controlled in various control modes including torque, speed, position; electronic gearing, contouring (PVT, PT), profiling (trapezoidal, S-curve); step motor emulation (step & direction input).
The device features fully digital servo amplifier with embedded intelligence & PLC functionality and proves suitable for brushless DC, brushless AC (vector control), DC brush, and 2-phase or 3-phase step motors. The module with compact open frame design (64 x 104 x 16 mm) in card format can be controlled in various control modes including torque, speed, position; electronic gearing, contouring (PVT, PT), profiling (trapezoidal, S-curve); step motor emulation (step & direction input).