+7 (812) 645-08-06
Spur gear reducers
select brand
Spur pinion gear reducer - 5 920 Nm, 435:1 | GST
The GST is a robust and highly economical geared motor, which is available in 1-, 2-, or 3-stage versions. The high permissible radial forces and closely stepped...
Spur pinion gear reducer - 5 920 Nm, 435:1 | GST
The GST is a robust and highly economical geared motor, which is available in 1-, 2-, or 3-stage versions. The high permissible radial forces and closely stepped speed reduction ratios, coupled with speed variation via variable speed drives on the input side, facilitate matching of the motor to the required machine and process parameters. Whether it is opt for hand wheel speed variation or electrical speed variation, there are plenty of scalable options to choose from. Due to its robust cast iron housing, high permissible torques and closely stepped speed reduction ratios can beat even the most stringent of requirements.
Spur pinion gear reducer / for hydraulic Kaplan bulb turbine - 500 - 7500 kW | TGU series
The TGU series gears feature a robust and highly compact design, with 99% efficiency, specifically intended for pit turbines. The efficiency of these units is largely...
Spur pinion gear reducer / for hydraulic Kaplan bulb turbine - 500 - 7500 kW | TGU series
The TGU series gears feature a robust and highly compact design, with 99% efficiency, specifically intended for pit turbines. The efficiency of these units is largely due to double helical toothing (optimized for specific application), low-friction bearings and optimal lubrication. The gear system support is located halfway along the shaft, and when combined with clever ribbing, enables force transfer directly from turbine to the foundations, eliminating housing flexural stress and ensuring exceptional tooth meshing, even at maximum load. These models feature a power range from 500 to 7,500 kW, with 750 min-1 output shaft speed and 1:3 to 1:7 gear ratios.
Spur pinion gear reducer / for hydraulic Kaplan bulb turbine - 100 - 7.500 kW, 750 rpm | TGVF, TDVF series
The TGVF/TDVF series is a line of singe- or two-stage spur gear systems engineered by Eisenbeiss. It is suitable for use in satisfying the requirements of tough applications...
Spur pinion gear reducer / for hydraulic Kaplan bulb turbine - 100 - 7.500 kW, 750 rpm | TGVF, TDVF series
The TGVF/TDVF series is a line of singe- or two-stage spur gear systems engineered by Eisenbeiss. It is suitable for use in satisfying the requirements of tough applications in vertical water turbines.
The unit features a motor rating of 100 kW to 7,500 kW. It has an output shaft speed of 750 rpm. The TGVF has a gear ratio of 3:7, and 7:18 for TDVF.
The system prevents any lubricant from escaping from the gear system through a wear-free seal system on the input shaft. The weight of the generator is accommodated safely, and the risk of critical vibration is minimized. The device is structured in a massive construction, and welded directly to the housing.
The unit features a motor rating of 100 kW to 7,500 kW. It has an output shaft speed of 750 rpm. The TGVF has a gear ratio of 3:7, and 7:18 for TDVF.
The system prevents any lubricant from escaping from the gear system through a wear-free seal system on the input shaft. The weight of the generator is accommodated safely, and the risk of critical vibration is minimized. The device is structured in a massive construction, and welded directly to the housing.
Spur pinion gear reducer - 20 - 5000 kW | KG, KD series
Eisenbeiss for spur gear systems are developed for various fields of application, adopted to exact specifications of the particular case. The various cases with various operating profile demand durability, easy maintenance gear system and satisfactory price/performance ratio. Several...
Spur pinion gear reducer - 20 - 5000 kW | KG, KD series
Eisenbeiss for spur gear systems are developed for various fields of application, adopted to exact specifications of the particular case. The various cases with various operating profile demand durability, easy maintenance gear system and satisfactory price/performance ratio. Several applications are non-stop operation where heat balance is crucial. In other application considerable loads are imposed at a standstill, operation's repeated brief phases are typical in which gear systems again cools down in between(e.g. drives for loopers or crane travel mechanisms).
Adopted toothwork geometries with case point and customized lubrication systems enables to achieve optimal profile maintaining durability, reliability and ease of maintenance for a wide variety of applications. Eisenbeiss gear system with specially optimized efficiency minimizes power losses, they do not heat up much and eliminates auxiliary cooling even in high power ratings. The gear includes G / D / GD / DD or KG / KD series spur/bevel gear systems, 1 -4 stages with 4-400 gear-ratio and 20 kW to 5,000 kW motor rating.
Adopted toothwork geometries with case point and customized lubrication systems enables to achieve optimal profile maintaining durability, reliability and ease of maintenance for a wide variety of applications. Eisenbeiss gear system with specially optimized efficiency minimizes power losses, they do not heat up much and eliminates auxiliary cooling even in high power ratings. The gear includes G / D / GD / DD or KG / KD series spur/bevel gear systems, 1 -4 stages with 4-400 gear-ratio and 20 kW to 5,000 kW motor rating.
Spur pinion gear reducer - 500 - 10000 kW | 2X, Y2 series
The 2X, Y2 series are manufactured by Eisenbeiss GmbH. These spur gear reducers have an output of up to 6 mW, that is divided between...
Spur pinion gear reducer - 500 - 10000 kW | 2X, Y2 series
The 2X, Y2 series are manufactured by Eisenbeiss GmbH. These spur gear reducers have an output of up to 6 mW, that is divided between two independent drive shafts. Features of the series include advanced calculation methods for toothing and shafts, and processing machines for corrected toothing.
With the robust construction of the casing and low-vibration design of the bevel gears, rolling flawless strip is made easy. Lubrication and cooling is done through forced feed lubrication/external cooling.
With the robust construction of the casing and low-vibration design of the bevel gears, rolling flawless strip is made easy. Lubrication and cooling is done through forced feed lubrication/external cooling.
Spur pinion gear reducer - 100 - 10000 kW | GW, GUW series
This single drive gear is available in horizontal and vertical designs. The device can provide a transmission of up to 6 MW with the pinion distance being only 400 mm in parts. Used here would be the high power density of the double...
Spur pinion gear reducer - 100 - 10000 kW | GW, GUW series
This single drive gear is available in horizontal and vertical designs. The device can provide a transmission of up to 6 MW with the pinion distance being only 400 mm in parts. Used here would be the high power density of the double helical gearing. It uses open-die forging shafts. This will eliminate the need of connections with shaft/hub collars in the gear unit. The device is safe to use as it ensures that no feather key is squashed or no gear shaft connection is damaged even if there is a case of strip tearing.
It uses proprietary brand bearing along with solid cages to supply strong stand drives, which can be used for tandem mills or reversing mills. It can provide service life of up to 100,000 hours. The device works on spur wheel pinion gear system. Its motor rating is from 100 kW to 10,000 kW and its gear ratio is 1 to 16. It features forced feed lubrication and external cooling.
It uses proprietary brand bearing along with solid cages to supply strong stand drives, which can be used for tandem mills or reversing mills. It can provide service life of up to 100,000 hours. The device works on spur wheel pinion gear system. Its motor rating is from 100 kW to 10,000 kW and its gear ratio is 1 to 16. It features forced feed lubrication and external cooling.
Spur pinion gear reducer - 100 Ncm, 7.5:1 - 750:1 | S1
The Spur gear reducer series works even without the presence of motor lines.
Spur pinion gear reducer - 500 Ncm, 10:1 - 1 250:1 | S5
The S5 Series of spur gear boxes is part of the company's product line of motor...
Spur pinion gear reducer - 500 Ncm, 10:1 - 1 250:1 | S5
The S5 Series of spur gear boxes is part of the company's product line of motor line-less tools. Models of the series feature capacity rates of 500 Ncm, and ratios that range from 10:1 to 1,250:1. A wide range of model configurations, complete with corresponding specifications, are available upon request.
Spur pinion gear reducer - 900 Ncm, 18.8:1 - 432:1 | S90
The S90 is manufactured by Kahlig Antriebstechnik Gmbh, and is a spur gear reducer...
Spur pinion gear reducer - 900 Ncm, 18.8:1 - 432:1 | S90
The S90 is manufactured by Kahlig Antriebstechnik Gmbh, and is a spur gear reducer that has gear ratios ranging from 18.8:1 up to 432.1. Its rated torque output is lesser than or equal to 900 Ncm. Kahlig Antriebstechnik Gmbh manufactures a wide variety of spur gear boxes, and also produces tailor-made gearboxes.
Spur pinion gear reducer - 1 500 Ncm, 15.5:1 - 92.3:1 | S92
The S92 Spur Gear Boxes are part of the company's line of motor line-less...
Spur pinion gear reducer - 1 500 Ncm, 15.5:1 - 92.3:1 | S92
The S92 Spur Gear Boxes are part of the company's line of motor line-less tools. feature capacity rates of 1,500 Ncm, and ratios that range from 15.5:1 to 92.3:1. A wide range of model configurations, complete with corresponding specifications, are available upon request.