+7 (812) 645-08-06
Guide shafts and rails
select brand
Precision shaft / steel
Due to their self-contained mounting and minimal installation effort, the eLine linear bushings and shafts are perfect for cost-effective applications. A clearance-free version of the linear sets and linear bushings are supplied. These are pre-greased...
Precision shaft / steel
Due to their self-contained mounting and minimal installation effort, the eLine linear bushings and shafts are perfect for cost-effective applications. A clearance-free version of the linear sets and linear bushings are supplied. These are pre-greased which means they are lubricated for life.
Components are available for shaft diameters ranging between 8 mm and 40 mm, with optional shaft brackets. Unlike the usual elaborate support needed, the linear bushings can just be pressed into the locating holes.
The eLine linear bushings and shafts have small exterior dimensions for particularly compact constructions, exceptionally economically priced linear bushings for general requirements, a simple press-in mounting process with no additional fixtures required, integrated metal holding rings (size 12 to 40) to secure seating in the housing bore, and hardened steel segments with conformity of fit for balls in the track which enables a long life and high load capacity.
Components are available for shaft diameters ranging between 8 mm and 40 mm, with optional shaft brackets. Unlike the usual elaborate support needed, the linear bushings can just be pressed into the locating holes.
The eLine linear bushings and shafts have small exterior dimensions for particularly compact constructions, exceptionally economically priced linear bushings for general requirements, a simple press-in mounting process with no additional fixtures required, integrated metal holding rings (size 12 to 40) to secure seating in the housing bore, and hardened steel segments with conformity of fit for balls in the track which enables a long life and high load capacity.
Slide shaft / stainless steel
Rexroth has manufactured this array of products to satisfy the demands of numerous...
Slide shaft / stainless steel
Rexroth has manufactured this array of products to satisfy the demands of numerous systems and machine suppliers relative to greater performance in reduced spaces. These miniaturized configurations are accessible in seven different sizes of shaft diameter, from 3 to 16 mm range, and in a huge set of creative designs.
Slide rail / precision - 3.2 m/s, 195 000 N
SKF was the first bearing supplier to develop a monolithic ACS cage guidance system (Anti Creeping System). Now SKF has consistently refined its own ACS solution into the Anti Creeping System Module (ACSM). Low friction and a high contact ratio...
Slide rail / precision - 3.2 m/s, 195 000 N
SKF was the first bearing supplier to develop a monolithic ACS cage guidance system (Anti Creeping System). Now SKF has consistently refined its own ACS solution into the Anti Creeping System Module (ACSM). Low friction and a high contact ratio...
Slide rail
SKF precision rail guides are high precision rail guides available with different guidance principles. The modular range comes with slide coating, balls, crossed...
Slide rail
SKF precision rail guides are high precision rail guides available with different guidance principles. The modular range comes with slide coating, balls, crossed rollers or needle rollers. The modular guide rails defines precision rail guides with different guidance principles all with exactly the same outer dimensions and drilling hole pattern. The rail guides are defined with fast engineering and its final load condition is determined later in the construction process. The existing application offers the provision of redesigning for new tasks or even retrofitting.
Precision rail / slide - 2 m/s | GCL/GCLA
These are devices that are suitable for factory automation, packaging, printing, general machinery and so on. The...
Precision rail / slide - 2 m/s | GCL/GCLA
These are devices that are suitable for factory automation, packaging, printing, general machinery and so on. The device has implemented the principle of precision - rail guides in it. The device can be used with three different widths and sizes ranging from 40 to 100 mm. The product can be available in different variations that include compact version, aluminum version, etc. The device provides various surface coatings, customized solutions and ACSM.
Motorized linear rail - 154 - 212 mm, 8.3 m/s | LTS
LTS profile rail guide slides consist of a stationary base which represents the intersection to the machine bed. An integrated linear...
Motorized linear rail - 154 - 212 mm, 8.3 m/s | LTS
LTS profile rail guide slides consist of a stationary base which represents the intersection to the machine bed. An integrated linear measurement system is used for precised positioning. It also ensures precise speed regulation. The LTS profile rail guide is mostly applied to this following areas: factory automation, laser machining, measurement devices, material handling, electronic product machinery and medical use. It has options like multiple slides on one system, energy chain, cable set, and different accuracy classes.
Linear shaft / precision / steel / guide
Material: Steel 1.1213 (CF53), hardness min. 59 HRC, chrome plated 10 µm.
Chrome-hardness...
Chrome-hardness...
Linear shaft / precision / steel / guide
Material: Steel 1.1213 (CF53), hardness min. 59 HRC, chrome plated 10 µm.
Chrome-hardness...
Chrome-hardness...
Splined shaft / steel - DIN ISO 14
The Splined Shafts is manufactured by Madler. The product has durable design because it is made...
Splined shaft / steel - DIN ISO 14
The Splined Shafts is manufactured by Madler. The product has durable design because it is made of steel or C45. The product complies to DIN ISO 14 standards and the products length ranges from 1000 mm up to 3000 mm and special lengths up to 6000 mm can be availed upon request. The straightness tolerance measures 0.8 mm/m and the maximum torsion measures 0.5 mm.m.