+7 (812) 645-08-06

Guide shafts and rails

select brand

Carrier rail / aluminum - 2000 - 8000 mm | LFS series

Guide ways are composed of an aluminium rail with pipes completed from undulating bearing steel...

Carrier rail / aluminum - 2000 - 8000 mm | LFS series

Guide ways are composed of an aluminium rail with pipes completed from undulating bearing steel rolled into the sides. The guideways are obtainable in several various plans, such as guideways with a firm outline, hollow section guideways, flat guideways, guideways with a slot, etc. The choice relies on the reason to which the track roller guidance system is set.

Linear rail with angled needle roller flat cage - M/V series

SCHAEFFLER'S M/V guideways with angled flat cage feature the design of flat cages with needle rollers or cylindrical rollers and are linear locating bearing. These guideways...

Linear rail with angled needle roller flat cage - M/V series

SCHAEFFLER'S M/V guideways with angled flat cage feature the design of flat cages with needle rollers or cylindrical rollers and are linear locating bearing. These guideways are supplied in Q2, Q6 and Q10 grades.

Made out of an intelligent combination of metal and plastic, they are best suited for demanding conditions such as high acceleration, high temperatures and where the ends of the cage are exposed at some point in operation. Of these, plastic cages are the most economical for simple operating conditions.

These are supplied with relevant accessories, which include endpieces for the guideways and wipers to protect the raceways against contamination.

Linear rail with adjusting gib and angled needle roller flat cage - ML/V

The ML/V guideway pair has a standard design which is equipped with an adjusting gib as well as angled needle roller flat cages. The gib is known to preload uniformly throughout...

Linear rail with adjusting gib and angled needle roller flat cage - ML/V

The ML/V guideway pair has a standard design which is equipped with an adjusting gib as well as angled needle roller flat cages. The gib is known to preload uniformly throughout...

Linear rail with angled needle roller flat cage - J/S

The guidance system design features J and S guideways separated by needle roller...

Linear rail with angled needle roller flat cage - J/S

The guidance system design features J and S guideways separated by needle roller flat cages. The guideways come in high and flat versions. The cage is composed of metal or plastic and featuring a single or double row design. The system is used as non-locating bearings and for limited stroke lengths.

Linear rail with needle roller flat cage - J/S

J and S guideways make up these guidance systems which are separated by needle roller flat...

Linear rail with needle roller flat cage - J/S

J and S guideways make up these guidance systems which are separated by needle roller flat cages. They are utilized for limited stroke lengths and as non-locating bearings.

High and flat versions of the guideways are supplied. They are available in a single or double row design and the cages can be constructed from either plastic or metal.

Slide unit cam

Due to the limited movements of every press tool, often not all special forming processes can be performed with one tool. Only the introduction of tool slides, which...

Slide unit cam

Due to the limited movements of every press tool, often not all special forming processes can be performed with one tool. Only the introduction of tool slides, which allow a forming process of more complex geometries via a change of direction, makes it possible to reduce the number of tools and the associated costs.

Our product portfolio includes the:
◾HIGH VOLUME - PREMIUM / Cam Slide Unit, full assembled
◾HIGH VOLUME - ECO LINE / Cam Slide Unit, full assembled
◾LOW VOLUME / Die Mounted Cam, part assembled
◾STANDARD / Cam Slide Unit
◾Roller Slide Units
◾Hydraulic Cam System

Slide unit cam - 70 - 607 kN, 65 - 300 mm | BAK, KBV2

type
driver, slide, slide bed:
GGG60 / steel*
*depending on the width of the working surface

slide plane
steel, hardened / bronze with...

Slide unit cam - 70 - 607 kN, 65 - 300 mm | BAK, KBV2

type
driver, slide, slide bed:
GGG60 / steel*
*depending on the width of the working surface

slide plane
steel, hardened / bronze with...

Slide unit cam - 98 - 627 kN, 70 - 1 000 mm | ECO-LINE

The 2016.207 GGG45 Cam Slide Unit has a driver, slide and slide bed. It features a gas spring return and a hardened steel/bronze slide plane with non-liquid lubricant. The Cam Slide Unit...

Slide unit cam - 98 - 627 kN, 70 - 1 000 mm | ECO-LINE

The 2016.207 GGG45 Cam Slide Unit has a driver, slide and slide bed. It features a gas spring return and a hardened steel/bronze slide plane with non-liquid lubricant. The Cam Slide Unit...