+7 (812) 645-08-06
Pneumatic clamps
select brand
Pneumatic toggle clamp - 490N | CH-10101-A
The CH-10101-A is a miniature clamp air powered version model. It is equipped...
Pneumatic toggle clamp - 490N | CH-10101-A
The CH-10101-A is a miniature clamp air powered version model. It is equipped...
Pneumatic toggle clamp - 891.8N | CH-12050-A, CH-12050-UA series
The CH-12050-A, manufactured by Clamptek, is an air powered...
Pneumatic toggle clamp - 891.8N | CH-12050-A, CH-12050-UA series
The CH-12050-A, manufactured by Clamptek, is an air powered...
Pneumatic toggle clamp - 3332N | CH-12265-A, CH-12275-A series
This product series consists of pneumatic clamps, air clams, toggle clamps, metal clamps, material handling...
Pneumatic toggle clamp - 3332N | CH-12265-A, CH-12275-A series
This product series consists of pneumatic clamps, air clams, toggle clamps, metal clamps, material handling clamps, manual clamping technology items and other similar products. With a weight evaluated between 1,640 and 1,800 g, along with a holding capacity of 3,332 N, this is one of the most advanced products on the market.
The spindle supplied is of type CH-FC-38312, while the bar can open to 86 degrees.
The spindle supplied is of type CH-FC-38312, while the bar can open to 86 degrees.
Pneumatic toggle clamp - 4410N | CH-10247-A, CH-10249-A series
The CH-10247 is a unit manufactured by Clamptek Enterprises. It is machine...
Pneumatic toggle clamp - 4410N | CH-10247-A, CH-10249-A series
The CH-10247 is a unit manufactured by Clamptek Enterprises. It is machine...
Pneumatic toggle clamp - 980-3332 N | CH-20820-A, CH-20830-A series
The CH-208-A series is suitable for use with air clamps, metal clamps, toggle clamps,...
Pneumatic toggle clamp - 980-3332 N | CH-20820-A, CH-20830-A series
The CH-208-A series is suitable for use with air clamps, metal clamps, toggle clamps, and pneumatic clamps. The unit is also utilized with hand tools, and material handling clamps. Also, the device is designed with a manual clamping technology. The series is available in two models, which are the CH-20820-A, and CH-20830-A.
Pneumatic toggle clamp - 05330
The lever material is sheet metal and axial bolts are of stainless steel. The levers have galvanised surface finish with the ratchet-pneumatic cylinder is double acting and anodized. the clams are galvanized, passivated which are hardened,...
Pneumatic toggle clamp - 05330
The lever material is sheet metal and axial bolts are of stainless steel. The levers have galvanised surface finish with the ratchet-pneumatic cylinder is double acting and anodized. the clams are galvanized, passivated which are hardened, galvanised with passivated press on bolts and protective cap. The pneumatic clams have lot of advantages like the operator gets relief of regular clamping against usage of hand clamps. Many clamps can be operated together and also in sequence. A hand control or machine control is used to operate single or multiple clamps.
Due to the knee operated lever system, the clamp is always closed if the air supply is cutoff. Also the consumption of compressed air is low due to large end transfer. The clamping arm achieves a large travel due to pivoting. Due to the knee operated lever, an optimum force and movement ratios are attained. VL is compressed air consumption per complete cycle in dm3 at 6 bar.
Due to the knee operated lever system, the clamp is always closed if the air supply is cutoff. Also the consumption of compressed air is low due to large end transfer. The clamping arm achieves a large travel due to pivoting. Due to the knee operated lever, an optimum force and movement ratios are attained. VL is compressed air consumption per complete cycle in dm3 at 6 bar.
Pneumatic toggle clamp - 05340
Norelem's 05340 are push-rod pneumatic clamps that can be used as a pressure and tension clamp. These devices has a heavy-duty...
Pneumatic toggle clamp - 05340
Norelem's 05340 are push-rod pneumatic clamps that can be used as a pressure and tension clamp. These devices has a heavy-duty design and a dual-acting FESTO pneumatic cylinder, which assures long life. These tools are also provided with galvanised and passivated pressure screw with protective cap.
These equipment has different versions, such as painted; bracket, levers and push-rod galvanised and passivated. In addition, these push-rod pneumatic clamps are made with a cast iron base.
These equipment has different versions, such as painted; bracket, levers and push-rod galvanised and passivated. In addition, these push-rod pneumatic clamps are made with a cast iron base.
Pneumatic toggle clamp - 05350
Material:
Tempered steel
Surface finish:
Black oxide finish
Note:
The double-acting RATCHET pneumatic...
Tempered steel
Surface finish:
Black oxide finish
Note:
The double-acting RATCHET pneumatic...
Pneumatic toggle clamp - 05350
Material:
Tempered steel
Surface finish:
Black oxide finish
Note:
The double-acting RATCHET pneumatic cylinder guarantees a long life.
The fixing screws for the axial bolts are secured with LOCTITE.
The magnetic shaft is prepared for electrical final position querying.
VL = compressed air consumption per complete cycle in dm3 at 6 bar.
Note:
The forces F1 and F2 specified in the table are holding forces; F3 and F4 are
clamping forces.
Tempered steel
Surface finish:
Black oxide finish
Note:
The double-acting RATCHET pneumatic cylinder guarantees a long life.
The fixing screws for the axial bolts are secured with LOCTITE.
The magnetic shaft is prepared for electrical final position querying.
VL = compressed air consumption per complete cycle in dm3 at 6 bar.
Note:
The forces F1 and F2 specified in the table are holding forces; F3 and F4 are
clamping forces.
Pneumatic swing clamp cylinder - 05610
The 05610 is a pneumatic swing latch clamp. The device is made of a base body aluminum, red anodized, double acting piston rod in stainless steel...
Pneumatic swing clamp cylinder - 05610
The 05610 is a pneumatic swing latch clamp. The device is made of a base body aluminum, red anodized, double acting piston rod in stainless steel materials and a polished finished.
These clamps are used when there is low clamping forces suffice. In order to place and remove the work piece, the torsion point must be free. The universal fastening possibilities are provided due to its block design housing. For fastening the clamping arms, the devices also consist of screw and lock washers. They utilize clamping arms 05620, and adapter 05625 as their accessories.
These clamps are used when there is low clamping forces suffice. In order to place and remove the work piece, the torsion point must be free. The universal fastening possibilities are provided due to its block design housing. For fastening the clamping arms, the devices also consist of screw and lock washers. They utilize clamping arms 05620, and adapter 05625 as their accessories.