+7 (812) 645-08-06
Pneumatic clamps
select brand
Pneumatic cylinder / clamping - max. 8 bar | LHS-L
The LHS-L model is manufactured by Roehm, and is an air-actuating cylinder with stroke monitor and...
Pneumatic cylinder / clamping - max. 8 bar | LHS-L
The LHS-L model is manufactured by Roehm, and is an air-actuating cylinder with stroke monitor and coolant collector, which has a safety factor and can work on high speeds. It has a short construction, which is appropriate for utilize with lathes and grinding machines to exploit the normally large spindle bores for requisitions. It also comes with a connection for supply and drain hoses.
Pneumatic cylinder / clamping - max. 10 bar | LVS
The LVS are ideally designed to provide a secure and protective capability for...
Pneumatic cylinder / clamping - max. 10 bar | LVS
The LVS are ideally designed to provide a secure and protective capability for the users and other related machineries. It is built with a non-rotating distribution unit of up to 10 bar. Majority of the pneumatic solid cylinders are made available with a fulcrumed distributor to enable a high speed capacity.
Pneumatic clamp - 2.5 kN, 250 bar
Pneumatic clamps produce double-acting functions and are integrated with a clamping...
Pneumatic clamp - 2.5 kN, 250 bar
Pneumatic clamps produce double-acting functions and are integrated with a clamping force of 2.5kN and a clamp stroke of 4.5mm. They are capable of generating a working pressure of 250 bar. These pneumatic clamps are constructed with metal wipers and can be connected with the aid of a cartridge type with cover.
Tilting rod clamp - 60 - 100 kN | TB90
The TB90 Tilting Rod Clamp is incorporated either in the front or rear position in a press bolster or ram. A U-shaped slot is on the front and rear sides of the...
Tilting rod clamp - 60 - 100 kN | TB90
The TB90 Tilting Rod Clamp is incorporated either in the front or rear position in a press bolster or ram. A U-shaped slot is on the front and rear sides of the die and the clamping rod fits into this. To hold it in position, the die is pulled against the ram or bolster in the same way as all rod clamps.
The TB90's clamping rod is tilted forward in the released state to a completely horizontal position. This clears the path so that the die is able to pass under or over it. The rod springs back to the clamping position when the opening hydraulic pressure has been taken away in order for a newly positioned die to be gripped.
The TB90's clamping rod is tilted forward in the released state to a completely horizontal position. This clears the path so that the die is able to pass under or over it. The rod springs back to the clamping position when the opening hydraulic pressure has been taken away in order for a newly positioned die to be gripped.