+7 (812) 645-08-06
Press brakes
select brand
Electric press brake - 40 t | E-Brake 40-1600
The E-Brake 35-130T is among the 3rd generation of servo-electronic press brakes that have been developed to minimize delivery time with a flexible modular design that guarantees optimal...
Electric press brake - 40 t | E-Brake 40-1600
The E-Brake 35-130T is among the 3rd generation of servo-electronic press brakes that have been developed to minimize delivery time with a flexible modular design that guarantees optimal performance. It operates with a pressure force range between 35 to 130 tons and working lengths of 1250 to 4100 mm. It utilizes a single pulley system and does not require crowing making it an energy efficient solution for e-brake needs. It has a large stroke length of 300 mm standard and features a CNC-controlled X- and Y-axes come standard. It is a reliable and stable machine with a backgauge that operates across the full working width of the machine. It also comes with an integrated safety-light screen which guarantees operation security.
Electric press brake - 50 t | E-Brake 50-2050
The E-Brake 35-130T servo-electronic press brake stands for the third cohort of the Original E-Brake. It is constructed in accordance with a stackable design, with substantial suppleness and little release times. It handles pressure forces that range from 35 tons to 130 tons with the...
Electric press brake - 50 t | E-Brake 50-2050
The E-Brake 35-130T servo-electronic press brake stands for the third cohort of the Original E-Brake. It is constructed in accordance with a stackable design, with substantial suppleness and little release times. It handles pressure forces that range from 35 tons to 130 tons with the working length that ranges from 1250 mm to 4100 mm. With 590 mm as the normal Q size and 650 mm and 690 mm as optional Q sizes, you can save up to 50 percent of current consumption by means of the Servo-electronic drive with the one pulley system. Without the necessity of crowning, you can decrease the maximum bending cycle times by 30% with the maximum bending velocities of equal to 20 mm/sec. SafanDarley E-Control 1 control is available with standard; statistical exhibit of bending constraints and 2-directional programming with simple 2-directional, Voluntary SafanDarley E-Control 2, 2D winding reproduction joint with off-line programming or E-Control 3 (2D or 3D explicit programming) Optional incorporated safety-light monitor stable back-measure that functions across the complete operational breadth of the appliance. CNC-powered X-...
Electric press brake - 65 t | E-Brake 65-2550
This servo electronic press brake depicts the third generation of the first E-Brake and is constructed with a modular design with substantial flexibility and reduced delivery time. The specifications of the unit include 35 tons 50 tons 65 tons 80 tons 100 tons 130...
Electric press brake - 65 t | E-Brake 65-2550
This servo electronic press brake depicts the third generation of the first E-Brake and is constructed with a modular design with substantial flexibility and reduced delivery time. The specifications of the unit include 35 tons 50 tons 65 tons 80 tons 100 tons 130 tons pressure forces, 1250 mm 1600 mm 2050 mm 2550 mm 3100 mm 4100 mm working lengths and standard 590 mm - optional 650 mm 690 mm sizes. This servo electric drive with one pulley system saves up to an impressive 50 percent in energy costs without the need for crowning.
It is able to achieve bending speeds of up to 20mm/sec and cuts bending cycle times by up to 30 percent. The features include a numerical display of bending parameters and 2D programming with Easy 2D optional SafanDarley E-Control 2, standard SafanDarley E-Control 1 control, 2D bending simulation along with off-line programming or E-Control 3 (2D or 3D graphic programming), an onsite optional safety light screen and stable back gauge that functions across the complete working width of the unit.
It is able to achieve bending speeds of up to 20mm/sec and cuts bending cycle times by up to 30 percent. The features include a numerical display of bending parameters and 2D programming with Easy 2D optional SafanDarley E-Control 2, standard SafanDarley E-Control 1 control, 2D bending simulation along with off-line programming or E-Control 3 (2D or 3D graphic programming), an onsite optional safety light screen and stable back gauge that functions across the complete working width of the unit.
Electric press brake - 80 t | E-Brake 80-2550
This third generation Original E-Brake servo-electronic press brake features a modular design that allows for impressive flexibility while retaining short delivery times. The...
Electric press brake - 80 t | E-Brake 80-2550
This third generation Original E-Brake servo-electronic press brake features a modular design that allows for impressive flexibility while retaining short delivery times. The pressure forces of this device are 35 tons, 50 tons, 65 tons, 80 tons, 100 tons and 130 tons, while the working lengths come in at 1,250mm, 1,600mm, 2,050mm, 2,550mm, 3,100mm and 4,100mm.
The Q sizes of this device are a standard 590mm, and optional sizes of either 650mm and 690mm are available too. The unit features a single pulley system and bending speeds of up to 20mm per second, with bending cycle times reduced by up to 30%. The standard control used with this unit is the SafanDarley E-Control 1.
The Q sizes of this device are a standard 590mm, and optional sizes of either 650mm and 690mm are available too. The unit features a single pulley system and bending speeds of up to 20mm per second, with bending cycle times reduced by up to 30%. The standard control used with this unit is the SafanDarley E-Control 1.
Electric press brake - 100 t | E-Brake 100-3100
These servo-hydraulic press brakes represent a third generation of the E-Brake series and feature a highly flexible design with short delivery times. These models are available with pressure...
Electric press brake - 100 t | E-Brake 100-3100
These servo-hydraulic press brakes represent a third generation of the E-Brake series and feature a highly flexible design with short delivery times. These models are available with pressure forces of 35, 50, 65, 80, 100 and 130 t and working lengths of 1250, 1600, 2050, 2550, 3100 and 4100 mm, with a standard Q size of 590 mm and optional 650 and 690 mm sizes. They feature a standard stroke length of 300 mm, a single pulley servo-electronic drive system, up to 50% reduction in power usage and bending speeds of 20 mm/sec with a 30% faster cycle time. They are provided with SafanDarley E-Control 1 as part of standard equipment, that allows numerical display of bending parameters and Easy 2D for 2D programming capabilities.
Brake press / CNC - 1 000 kN | TruBend 3100
The TruBend 3100 contains the Bendguard which ensures optimal speed with elevated safety and quick setup time. Its features include a rapid speed of 200 mm/s, 1000 kN press force,...
Brake press / CNC - 1 000 kN | TruBend 3100
The TruBend 3100 contains the Bendguard which ensures optimal speed with elevated safety and quick setup time. Its features include a rapid speed of 200 mm/s, 1000 kN press force, 3060 mm bending length, a maximum working speed of 15 mm/s in addition to the eradication of the necessity of frequent oil changes via modern hydraulic oil utilization.
The TruBend 3100 also consists of advanced drive technologies that secures low energy consumption, a 5-axis back gauge system that delivers enhanced versatility, instinctive operating design via T3500T multi-touch control as well as an automatic crowning facility that allows consistent bending angles.
The TruBend 3100 also consists of advanced drive technologies that secures low energy consumption, a 5-axis back gauge system that delivers enhanced versatility, instinctive operating design via T3500T multi-touch control as well as an automatic crowning facility that allows consistent bending angles.
Brake press / CNC - 500 - 1 700 kN | TruBend 5000 series
This is a machine that has combined higher level of precision along with innovative technology. The best...
Brake press / CNC - 500 - 1 700 kN | TruBend 5000 series
This is a machine that has combined higher level of precision along with innovative technology. The best feature of the device is it's excellent productivity at various phases of process that include programming, setting up of tool and also actual bending. It has wider range of - parts associated with it and is capable of positioning with dynamic axis. It has got machine controls and intuitive programming.
Brake press / CNC - 180 - 360 kN | TruBend 7000 series
The appliance that sets an example for the harmonized communication between a worker and the appliance is the TruBend Series 7000....
Brake press / CNC - 180 - 360 kN | TruBend 7000 series
The appliance that sets an example for the harmonized communication between a worker and the appliance is the TruBend Series 7000. Through this appliance, you can rest guaranteed to attain an excellent output at each stage of the process due to its high velocity and speeding up, the efficient working atmosphere offered by its ergonomic characteristics that include: Maximized, multiaxis dynamics, excellent output, designed for highest comfort, abridged footprint and low power consumption.
Electric press brake - 500 - 2 200 kN | HD series
By intuitively integrating bi-directional hydraulic pumps and electric servo-motors, the top of the line Amada's HD bending machine is able to deliver exceptional performance...
Electric press brake - 500 - 2 200 kN | HD series
By intuitively integrating bi-directional hydraulic pumps and electric servo-motors, the top of the line Amada's HD bending machine is able to deliver exceptional performance with decreased oil and electricity consumption. With such the product offers a more cost-efficient operation and lesser maintenance.
To continue, with a wide variety of device, Amada prides itself with another machine that features a unique piloted deforming beam operated with a smart numerical control console that instinctively adjusts its settings to fit the necessary application needed for the material type, bend position and thickness of the object. The machine is very easy and safe to handle.
To continue, with a wide variety of device, Amada prides itself with another machine that features a unique piloted deforming beam operated with a smart numerical control console that instinctively adjusts its settings to fit the necessary application needed for the material type, bend position and thickness of the object. The machine is very easy and safe to handle.
Electric press brake - 1 000 kN | HD 1003 ATC
Amada HD series has been named HD as it features a combination of electric servo-motors and bi-directional hydraulic pumps. It employs a start-stop mechanism that allows the pump to rotate only when the...
Electric press brake - 1 000 kN | HD 1003 ATC
Amada HD series has been named HD as it features a combination of electric servo-motors and bi-directional hydraulic pumps. It employs a start-stop mechanism that allows the pump to rotate only when the bending cycle is in progress. This results in savings in electricity consumption as well as oil volumes and also reduced maintenance needs. Thanks to this system, the advanced HD range delivers outstanding bending outcomes. An additional unique tool is the piloted deforming beam. The numerical control fully controls this beam deflection.
1003 ATC press brake with auto tool changer is an HD version and provides improved adaptability and performance. The punches and dies are accurately placed from the tool magazine by a four-axis manipulator. It has a tool capacity of up to 26.4m.
1003 ATC press brake with auto tool changer is an HD version and provides improved adaptability and performance. The punches and dies are accurately placed from the tool magazine by a four-axis manipulator. It has a tool capacity of up to 26.4m.
Brake press / CNC - 500 - 2 200 kN | HFE M2 series
The first impressive feature about this item is represented by the over 125,000 press breaks, as well as the 1,500 bending cells installed on the machine. The excellent technical expertise of the manufacturer, along...
Brake press / CNC - 500 - 2 200 kN | HFE M2 series
The first impressive feature about this item is represented by the over 125,000 press breaks, as well as the 1,500 bending cells installed on the machine. The excellent technical expertise of the manufacturer, along with the fantastic response rate to the needs of the customer and the reliability of the production process make this item one of the best in the industry.
In addition, it also comes equipped with the latest technological developments, which are useful to the investor and operator at the same time. For example, an advanced digital touchscreen control system has been added to the device, along with a new man-machine interface and various oil and energy saving functionality.
The HFE M2 is also available in versions of 170 and 220 tons, as well as in a heavy-duty version that supports 320tons/4m and 400tons/6m.
In addition, it also comes equipped with the latest technological developments, which are useful to the investor and operator at the same time. For example, an advanced digital touchscreen control system has been added to the device, along with a new man-machine interface and various oil and energy saving functionality.
The HFE M2 is also available in versions of 170 and 220 tons, as well as in a heavy-duty version that supports 320tons/4m and 400tons/6m.
Electric press brake - 500 - 2 200 kN | HG
The new HG series of press brakes, as designed by AMADA, have servoelectric hybrid drives. This...
Electric press brake - 500 - 2 200 kN | HG
The new HG series of press brakes, as designed by AMADA, have servoelectric hybrid drives. This exceptionally fast and accurate series focuses on economic efficiency, ease of use and outstanding precision for high-end bending operations. It achieves these goals with its patented hybrid drive system, with the additional attraction of a new 'Smartphone style' 3D control unit.