+7 (812) 645-08-06
High-shear mixers, dispersers
select brand
Batch disperser / for laboratories - 2 000 - 30 000 rpm | PT 1300 D
The POLYTRON ® PT 1300 D Manual Disperser (High End Line) is a homogenizer that is fitting for quick processing of small sample quantities and volumes. It can be either handheld or mounted on a swivel type stand, and the lightweight device is convenient...
Batch disperser / for laboratories - 2 000 - 30 000 rpm | PT 1300 D
The POLYTRON ® PT 1300 D Manual Disperser (High End Line) is a homogenizer that is fitting for quick processing of small sample quantities and volumes. It can be either handheld or mounted on a swivel type stand, and the lightweight device is convenient...
Batch disperser / for laboratories - 500 - 30 000 rpm | PT 2500 E
The PT2500 E performs homogenizations with volumes that range from 0.05 to 2500 ml. This perfect solution for laboratories that are cost conscious has an electronic control system that will monitor and...
Batch disperser / for laboratories - 500 - 30 000 rpm | PT 2500 E
The PT2500 E performs homogenizations with volumes that range from 0.05 to 2500 ml. This perfect solution for laboratories that are cost conscious has an electronic control system that will monitor and maintains continuously, the speed and also be able to automatically adjust it. This is to ensure that it is constant with the changing viscosity. The speed can be viewed quiet easily on the digital display. Aggregates with a various styles and diameters should be able to provide optimum particle size reduction when this drive is in use. Aggregates are available from 3mm in diameter for volumes going down to 0.01 mL and 12mm for volumes up to 250mL. A single-use synthetic aggregates in 7 and 12 mm diameters are also available. The PT-DA 20/2 X EC aggregate has been designed for homogenizing tablets.
Batch disperser / for laboratories - 500 - 40 000 rpm | PT 4000
The PT 4000 by Kinematica is a laboratory batch dispersion which offers a much higher aggregate tip speed that can reach up to 40,000...
Batch disperser / for laboratories - 500 - 40 000 rpm | PT 4000
The PT 4000 by Kinematica is a laboratory batch dispersion which offers a much higher aggregate tip speed that can reach up to 40,000 rpm. This is the tool used for providing a mean of producing nano particles. The whole unit features its motor that is brushless and it has a high frequency. This tool also has a low noise level at a maximum speed which is ideal for a lab that do not have enough space. Plus, it comes with variations of aggregates that have a diameter of 3 mm and volumes coming from 0.01 to 2500 ml.
Batch disperser / for laboratories - 500 - 30 000 rpm | PT 10-35 GT
The POLYTRON® PT 10/35 GT is a stand dispersing unit designed with 1200 watt engine. It is suitable for operations with...
Batch disperser / for laboratories - 500 - 30 000 rpm | PT 10-35 GT
The POLYTRON® PT 10/35 GT is a stand dispersing unit designed with 1200 watt engine. It is suitable for operations with...
Batch disperser / for laboratories - 500 - 30 000 rpm | PT 3100 D
The POLYTRON® PT 3100D is a stand dispersion system designed with a complete digital control. It has a regulating unit...
Batch disperser / for laboratories - 500 - 30 000 rpm | PT 3100 D
The POLYTRON® PT 3100D is a stand dispersion system designed with a complete digital control. It has a regulating unit...
High-shear mixer / batch / explosion-proof - Classic series
The Classic Series, manufactured by Lightnin®, is a batch high shear mixer. This machine...
High-shear mixer / batch / explosion-proof - Classic series
The Classic Series, manufactured by Lightnin®, is a batch high shear mixer. This machine...
High-shear mixer / continuous - Line Blender™
The Line Blender™ a continuous high shear mixer that is specially designed for pre-mixing...
High-shear mixer / continuous - Line Blender™
The Line Blender™ a continuous high shear mixer that is specially designed for pre-mixing processes or for quick reaction and blending applications specifically utilized in chemical, and food processing. They may alos be used for petroleum refining, and in the treating of waste water. This high shear mixer is integrated with a motor and several impellers.
Continuous disperser - Omega®
Successful dispersion requires targeted force so as to separate agglomerated particles. With the Omega® Economic Disperser, one is able to apply dispersive forces then and there, in locations where they are most effective....
Continuous disperser - Omega®
Successful dispersion requires targeted force so as to separate agglomerated particles. With the Omega® Economic Disperser, one is able to apply dispersive forces then and there, in locations where they are most effective....
In-line disperser - Ψ-Mix®
The Ψ-Mix® inline disperser wets the solid components on a large surface of liquid as part of the new dispersion method. This is going to be an emission and dust free operation. The vacuum dispersion,...
In-line disperser - Ψ-Mix®
The Ψ-Mix® inline disperser wets the solid components on a large surface of liquid as part of the new dispersion method. This is going to be an emission and dust free operation. The vacuum dispersion,...
Continuous disperser - Max-Shear
Minimized enough to be incorporated at basically any point in your methodology. The pumping toward oneself compact...
Continuous disperser - Max-Shear
Minimized enough to be incorporated at basically any point in your methodology. The pumping toward oneself compact unit characteristics rotor/stator based engineering with different stator setups accessible. Made to amazingly exact tolerances to wipe out item by passing common of other single stage dispersers. Uncommon high shear execution and compelling pumping activity makes the Max-Shear perfect for emulsifying and transforming hard-to-wet materials.
Rotor-stator disperser / batch / high-speed - VMS
Featuring a precision high-speed rotor, which creates a vigorous pumping action as it draws liquid into the stator inlet. Liquid is discharged at high velocity through machined slots...
Rotor-stator disperser / batch / high-speed - VMS
Featuring a precision high-speed rotor, which creates a vigorous pumping action as it draws liquid into the stator inlet. Liquid is discharged at high velocity through machined slots in the stator. This results in a powerful combination of mechanical and hydraulic shear. Certain processes such as emulsification or dispersing pigments and other solid particulate into a liquid medium requiring high shearing action.
- Shorter mixing cycles
- More uniform
- Faster wetting and dissolving of hard to web powders
- Finer particle size of suspended solids
- Smaller emulsion droplet size
- Improved premixes to increase efficiency of downstream grinding devices
(such as media mills)
- Shorter mixing cycles
- More uniform
- Faster wetting and dissolving of hard to web powders
- Finer particle size of suspended solids
- Smaller emulsion droplet size
- Improved premixes to increase efficiency of downstream grinding devices
(such as media mills)
Batch disperser / for laboratories - ShearMaster
The ShearMaster laboratory dissolver is a mixing aggregate from Netzsch that is designed for quick and intensive mixing and dispersing of small, 1-10 L product. It is integrated with a 1.1 kW electric...
Batch disperser / for laboratories - ShearMaster
The ShearMaster laboratory dissolver is a mixing aggregate from Netzsch that is designed for quick and intensive mixing and dispersing of small, 1-10 L product. It is integrated with a 1.1 kW electric drive and a frequency inverter that enables speed adjustment for mixing tools from 500 - 6000 min-1 or alternatively 100 - 1200 min-1.
This mixer has a mixing vessel that can be used as a can or container and is exchangeable with the quick clamp device. The machine also allows the disk to be raised or lowered to the proper position using a linear motor in the IP model or a pneumatic cylinder in the EXmode. This is to guarantee the best vortex position. This machine also allow the user to monitor and control the operation with the use of its digital display.
This mixer has a mixing vessel that can be used as a can or container and is exchangeable with the quick clamp device. The machine also allows the disk to be raised or lowered to the proper position using a linear motor in the IP model or a pneumatic cylinder in the EXmode. This is to guarantee the best vortex position. This machine also allow the user to monitor and control the operation with the use of its digital display.