+7 (812) 645-08-06
Aerators, deaerators, diffusors...
select brand
Surface aerator / for wastewater treatment / low-speed - LTF, 1.5-110kW / 2-150CV
The hydrodynamic shape of the polyester rotor encourages mixing and oxygenation of the water.
The assembly can be fixed on a concrete base or a metal frame using the base plate. The...
The assembly can be fixed on a concrete base or a metal frame using the base plate. The...
Surface aerator / for wastewater treatment / low-speed - LTF, 1.5-110kW / 2-150CV
The hydrodynamic shape of the polyester rotor encourages mixing and oxygenation of the water.
The assembly can be fixed on a concrete base or a metal frame using the base plate. The very robust low speed turbine is designed for fixed or floating use. It is composed of the components above joined together by a rigid shaft.
The main components of the TLF include:
- The gear motor;
- The coupling shaft;
- The rotor, made of reinforced fiberglass polyester, filled with expanded polyurethane foam. Its density, less than 1, assists with full tank assembly and reduces axial load on the gear motor. (The rotor can be available in metal depending on customer's request).
Technical features: consult our brochure.
The assembly can be fixed on a concrete base or a metal frame using the base plate. The very robust low speed turbine is designed for fixed or floating use. It is composed of the components above joined together by a rigid shaft.
The main components of the TLF include:
- The gear motor;
- The coupling shaft;
- The rotor, made of reinforced fiberglass polyester, filled with expanded polyurethane foam. Its density, less than 1, assists with full tank assembly and reduces axial load on the gear motor. (The rotor can be available in metal depending on customer's request).
Technical features: consult our brochure.
Submersible aerator-mixer / for wastewater treatment - SOFIE, 4-37kW / 5.5-50CV
The SOFIE is Europelec's high-performance submerged turbine aerator and/or mixer with a vertical shaft and is designed to mix and transfer oxygen in waste water as efficiently as possible.
The solidly-built components have been selected to guarantee a long life...
The solidly-built components have been selected to guarantee a long life...
Submersible aerator-mixer / for wastewater treatment - SOFIE, 4-37kW / 5.5-50CV
The SOFIE is Europelec's high-performance submerged turbine aerator and/or mixer with a vertical shaft and is designed to mix and transfer oxygen in waste water as efficiently as possible.
The solidly-built components have been selected to guarantee a long life with a reduced maintenance.
The SOFIE consists mainly of stainless steel blades rotor with a hydrodynamic optimised shape in a depression housing equipped with exhaust channels.
The main components of the SOFIE include:
- A solidly-built submersible geared-motor;
- A connection with a feeding air flexible elastomer pipe;
- A stainless steel depression housing equipped with exhaust channels;
- A stainless steel blades rotor ;Stainless steel feet for anchoring on the bottom of a tank.
The submersible low speed turbine is completely designed and manufactured in France.
This turbine associated with an air compressor allows both mixing and aeration without aerosol projections or noise pollution.
Technical features: consult our brochure.
The solidly-built components have been selected to guarantee a long life with a reduced maintenance.
The SOFIE consists mainly of stainless steel blades rotor with a hydrodynamic optimised shape in a depression housing equipped with exhaust channels.
The main components of the SOFIE include:
- A solidly-built submersible geared-motor;
- A connection with a feeding air flexible elastomer pipe;
- A stainless steel depression housing equipped with exhaust channels;
- A stainless steel blades rotor ;Stainless steel feet for anchoring on the bottom of a tank.
The submersible low speed turbine is completely designed and manufactured in France.
This turbine associated with an air compressor allows both mixing and aeration without aerosol projections or noise pollution.
Technical features: consult our brochure.
Wastewater treatment aerator / high-speed / floating - AQUAFEN, 1.5-110kW / 2-150CV
Specially designed to float, the AQUAFEN turbine is suitable for all environment types and is easy to install and maintain.
The applications are numerous: lakes, rainwater basins, lagoons and biological tanks in municipal or industrial wastewater treatment plants.
The floating aerators in the AQUAFEN...
The applications are numerous: lakes, rainwater basins, lagoons and biological tanks in municipal or industrial wastewater treatment plants.
The floating aerators in the AQUAFEN...
Wastewater treatment aerator / high-speed / floating - AQUAFEN, 1.5-110kW / 2-150CV
Specially designed to float, the AQUAFEN turbine is suitable for all environment types and is easy to install and maintain.
The applications are numerous: lakes, rainwater basins, lagoons and biological tanks in municipal or industrial wastewater treatment plants.
The floating aerators in the AQUAFEN range are fully designed and manufactured in France. At every stage of the development and optimization of this range, the choice of the selected solutions has been guided by the following requirements:
- Quality of the materials used;
- Corrosion resistance;
- Ease of installation and implementation;
- Ease of maintenance;
- Best cost/efficiency ratio.
It is particularly easy to maintain thanks to the absence of submerged bearings or couplings.
The AQUAFEN has the following components:
- The motor with its protective housing and improved seal;
- The stainless steel impeller;
- The intake cone;
- The rotoflector designed to limit water diffusion head loss;
- The floater anchored at three or four points. It ensures the perfect stability of the aerator in all operating conditions without the need for an additional device.
Technical features: consult our brochure.
The applications are numerous: lakes, rainwater basins, lagoons and biological tanks in municipal or industrial wastewater treatment plants.
The floating aerators in the AQUAFEN range are fully designed and manufactured in France. At every stage of the development and optimization of this range, the choice of the selected solutions has been guided by the following requirements:
- Quality of the materials used;
- Corrosion resistance;
- Ease of installation and implementation;
- Ease of maintenance;
- Best cost/efficiency ratio.
It is particularly easy to maintain thanks to the absence of submerged bearings or couplings.
The AQUAFEN has the following components:
- The motor with its protective housing and improved seal;
- The stainless steel impeller;
- The intake cone;
- The rotoflector designed to limit water diffusion head loss;
- The floater anchored at three or four points. It ensures the perfect stability of the aerator in all operating conditions without the need for an additional device.
Technical features: consult our brochure.
Surface aerator / for wastewater treatment / floating - COVERMAX
The COVERMAX is a completely covered surface aerator.
It is designed in order to answer to WWTP specific requirements.
As a result of the high efficiency low speed and high diameter aerators technology, the COVERMAX presents the following
Advantages and specifications:
The...
It is designed in order to answer to WWTP specific requirements.
As a result of the high efficiency low speed and high diameter aerators technology, the COVERMAX presents the following
Advantages and specifications:
The...
Surface aerator / for wastewater treatment / floating - COVERMAX
The COVERMAX is a completely covered surface aerator.
It is designed in order to answer to WWTP specific requirements.
As a result of the high efficiency low speed and high diameter aerators technology, the COVERMAX presents the following
Advantages and specifications:
The COVERMAX technical allows keeping a maximum heat in the biology, as about 100% of the electric energy is introduced into the water. In the summer, the cooling is possible thanks to specific disposals.
The COVERMAX replaces the basin covering installation.
The floating COVERMAX allows variable water levels in the aeration basin like for SBR (Sequence Batch Reactor)
COVERMAX engineering decreases the concrete structures costs.
The aerosols are eliminated with the COVERMAX system.
The COVERMAX decreases considerably the noise.
The COVERMAX is an esthetically designed.
The COVERMAX maintenance is easy, thanks to his integrated footbridge with or without railing.
The COVERMAX keeps the sludge in the basin, so that the free boards may be reduced.
Integrated anti-vortex.
The gearbox is well protected.
It is designed in order to answer to WWTP specific requirements.
As a result of the high efficiency low speed and high diameter aerators technology, the COVERMAX presents the following
Advantages and specifications:
The COVERMAX technical allows keeping a maximum heat in the biology, as about 100% of the electric energy is introduced into the water. In the summer, the cooling is possible thanks to specific disposals.
The COVERMAX replaces the basin covering installation.
The floating COVERMAX allows variable water levels in the aeration basin like for SBR (Sequence Batch Reactor)
COVERMAX engineering decreases the concrete structures costs.
The aerosols are eliminated with the COVERMAX system.
The COVERMAX decreases considerably the noise.
The COVERMAX is an esthetically designed.
The COVERMAX maintenance is easy, thanks to his integrated footbridge with or without railing.
The COVERMAX keeps the sludge in the basin, so that the free boards may be reduced.
Integrated anti-vortex.
The gearbox is well protected.
Surface aerator / for wastewater treatment - AIRMAX
The low speed surface aerator AIRMAX is used for aeration of biological waste-water treatment plant, with an ideal design for very high...
Surface aerator / for wastewater treatment - AIRMAX
The low speed surface aerator AIRMAX is used for aeration of biological waste-water treatment plant, with an ideal design for very high productivity and superior mixing as it has a huge width and very low speed. The power spectrum goes from 2.2 up to 250 kw per unit with user-friendly Power management without any requirement of productivity advancement by speed control. It can be utilized on a concrete bridge or as floating device for ponds aeration. The modern construction can be completely covered which prevents noise and aerosols.
Surface aerator / for wastewater treatment / floating - SOLAIRMAX
KAMPS presents solar aerator SOLAIRMAX. It is a low-speed aerator with a vertical design. It provides excellent energy...
Surface aerator / for wastewater treatment / floating - SOLAIRMAX
KAMPS presents solar aerator SOLAIRMAX. It is a low-speed aerator with a vertical design. It provides excellent energy efficiency. SOLAIRMAX does not require a grid connection or a battery, which makes it a perfect tool for "non-aerated" ponds, lakes and fishing lakes.
The aerator is fully automatic and allows several options. It offers a range of 2.2 to 5.5kw, and higher ranges are available if needed. It is almost maintenance free.
The aerator is fully automatic and allows several options. It offers a range of 2.2 to 5.5kw, and higher ranges are available if needed. It is almost maintenance free.
Laboratory aerator - 5 - 50 l/h | CRA121
The OMVE Cra121 Table-Top Aerator is outlined as a reduced tabletop unit to circulate air through an extensive variety of items on a little scale for R&d and preparing purposes. The bureau houses...
Laboratory aerator - 5 - 50 l/h | CRA121
The OMVE Cra121 Table-Top Aerator is outlined as a reduced tabletop unit to circulate air through an extensive variety of items on a little scale for R&d and preparing purposes. The bureau houses the air infusion framework, recurrence controllers and all essential switchgear. The touch screen is embedded into the front board, and permits conformity of pump speed and blending head speed.
OMVE's Cra121 Table-Top Aerator showcases a wide range of parameters. Gas dosing is controlled by an exactness needle valve. The blending head stator is jacketed to permit cooling/warming of the head. The coat is completely divided from the item chamber, in order to guarantee no cooling operator spillage into the item happens. It also exhibits a minimal working space requirement.
OMVE's Cra121 Table-Top Aerator showcases a wide range of parameters. Gas dosing is controlled by an exactness needle valve. The blending head stator is jacketed to permit cooling/warming of the head. The coat is completely divided from the item chamber, in order to guarantee no cooling operator spillage into the item happens. It also exhibits a minimal working space requirement.