+7 (812) 645-08-06
Vibration monitoring systems
select brand
Vibration monitoring system bearing - VS-1, VS-2
Vibration Monitors
Features
• Settable trip-point in RMS vibration velocity units (in/s)
• Settable over/under alarm function
• 2 output options: SPDT relay and isolated transistor
• Both output options are failsafe
• Settable alarm delay suppresses...
Features
• Settable trip-point in RMS vibration velocity units (in/s)
• Settable over/under alarm function
• 2 output options: SPDT relay and isolated transistor
• Both output options are failsafe
• Settable alarm delay suppresses...
Vibration monitoring system bearing - VS-1, VS-2
Vibration Monitors
Features
• Settable trip-point in RMS vibration velocity units (in/s)
• Settable over/under alarm function
• 2 output options: SPDT relay and isolated transistor
• Both output options are failsafe
• Settable alarm delay suppresses nuisance alarms
• At-a-glance power, vibration and output status
• 24 VDC powered
• 2 housing options: compact NEMA 4X and XP (explosion proof)
VS1 and VS2 monitor the machine surface to which they are attached and alarm when vibration either exceeds or falls below the trip-point setting, according to the alarm over/under switch setting. Each have three LED indicators providing power, vibration and alarm status. The isolated transistor or relay output may be wired for machine shutdown or as part of an early warning system. The adjustable alarm delay prevents false alarms by allowing the user to set the minimum continuous fault condition time for alarm, thus preventing needless system shutdowns during operation or startup. Two rugged cast aluminum housing options are available for each model: the compact NEMA 4X and the Class I and II rated explosion proof (XP). A separate 24 VDC power supply is also available.
Features
• Settable trip-point in RMS vibration velocity units (in/s)
• Settable over/under alarm function
• 2 output options: SPDT relay and isolated transistor
• Both output options are failsafe
• Settable alarm delay suppresses nuisance alarms
• At-a-glance power, vibration and output status
• 24 VDC powered
• 2 housing options: compact NEMA 4X and XP (explosion proof)
VS1 and VS2 monitor the machine surface to which they are attached and alarm when vibration either exceeds or falls below the trip-point setting, according to the alarm over/under switch setting. Each have three LED indicators providing power, vibration and alarm status. The isolated transistor or relay output may be wired for machine shutdown or as part of an early warning system. The adjustable alarm delay prevents false alarms by allowing the user to set the minimum continuous fault condition time for alarm, thus preventing needless system shutdowns during operation or startup. Two rugged cast aluminum housing options are available for each model: the compact NEMA 4X and the Class I and II rated explosion proof (XP). A separate 24 VDC power supply is also available.
Vibrating monitoring system / continuous - 230 VAC | VUM-800
Features
• Heavy-duty sensing probe
• DPDT 10 amp relay
• Optional 230 VAC operation
• Control unit remotely mounted
• Failsafe operation
The...
• Heavy-duty sensing probe
• DPDT 10 amp relay
• Optional 230 VAC operation
• Control unit remotely mounted
• Failsafe operation
The...
Vibrating monitoring system / continuous - 230 VAC | VUM-800
Features
• Heavy-duty sensing probe
• DPDT 10 amp relay
• Optional 230 VAC operation
• Control unit remotely mounted
• Failsafe operation
The VUM800 Vibration Monitor confirms normal operation of processes utilizing continuous vibration. Since the VUM800 measures actual vibration, not motor rotation, power draw, or any other implied measures, all sources of failure are detected: power loss, motor or gearbox failure, belt slippage, or breakage. Applications include shaker screens, vibratory feeders, bin bottoms, and crushers. The solid state electronics of the rugged VUM800 are epoxy encapsulated in metal. The VUM800 is easily installed and needs no calibration or maintenance. The unit is failsafe; power loss or a broken cable will indicate an alarm situation.
• Heavy-duty sensing probe
• DPDT 10 amp relay
• Optional 230 VAC operation
• Control unit remotely mounted
• Failsafe operation
The VUM800 Vibration Monitor confirms normal operation of processes utilizing continuous vibration. Since the VUM800 measures actual vibration, not motor rotation, power draw, or any other implied measures, all sources of failure are detected: power loss, motor or gearbox failure, belt slippage, or breakage. Applications include shaker screens, vibratory feeders, bin bottoms, and crushers. The solid state electronics of the rugged VUM800 are epoxy encapsulated in metal. The VUM800 is easily installed and needs no calibration or maintenance. The unit is failsafe; power loss or a broken cable will indicate an alarm situation.
Vibration monitoring system bearing - VS-1 XP, VS2-XP
Electro-Sensors VS1 XP Vibration Monitor is a rugged, compact, stand-alone vibration monitor engineered to protect industrial machinery against excessive vibration levels caused by imbalance, misalignment, looseness, or worn bearings. When used to...
Vibration monitoring system bearing - VS-1 XP, VS2-XP
Electro-Sensors VS1 XP Vibration Monitor is a rugged, compact, stand-alone vibration monitor engineered to protect industrial machinery against excessive vibration levels caused by imbalance, misalignment, looseness, or worn bearings. When used to monitor the vibration level, the VS1 XP facilitates the early detection of a pending malfunction, easing the scheduling demands for preventive maintenance.
The VS1 XP has the option of either an NPN or relay output that can be wired for machine shutdown or early warning. An adjustable alarm delay prevents false trips by allowing the user to set a minimum fault condition time before the output changes state.
Housed in a rugged XP enclosure, the VS1 XP mounts directly to the measurement point of the machine being monitored. It is ideal for safeguarding fans, blowers, crushers, compressors, chillers, mixers, large motors, gearboxes, turbines, conveyors, pumps, centrifuges, blenders, and reciprocating machines.
The VS1 XP has the option of either an NPN or relay output that can be wired for machine shutdown or early warning. An adjustable alarm delay prevents false trips by allowing the user to set a minimum fault condition time before the output changes state.
Housed in a rugged XP enclosure, the VS1 XP mounts directly to the measurement point of the machine being monitored. It is ideal for safeguarding fans, blowers, crushers, compressors, chillers, mixers, large motors, gearboxes, turbines, conveyors, pumps, centrifuges, blenders, and reciprocating machines.
Vibrating monitoring system / continuous - VUM-800 Probe
Electro-Sensors VUM-800 Vibration Monitor System confirms normal operation of processes utilizing continuous vibration. Since the VUM-800 measures actual vibration, not motor rotation, power draw, or any other implied...
Vibrating monitoring system / continuous - VUM-800 Probe
Electro-Sensors VUM-800 Vibration Monitor System confirms normal operation of processes utilizing continuous vibration. Since the VUM-800 measures actual vibration, not motor rotation, power draw, or any other implied measures, all sources of failure are detected: power loss, motor or gearbox failure, belt slippage or breakage. Applications include shaker screens, vibratory feeders, bin bottoms, and crushers. The solid state electronics of the VUM-800 are epoxy encapsulated in metal, making it rugged. The VUM-800 is easily installed and needs no calibration or maintenance. The unit is fail-safe- power loss or a broken cable will indicate an alarm situation.
Features:
Heavy Duty Sensing Probe
Integrates With Remotely Mounted Control Unit
Fail-Safe Operation
Protects Your Machinery Against Catastrophic Failu
Features:
Heavy Duty Sensing Probe
Integrates With Remotely Mounted Control Unit
Fail-Safe Operation
Protects Your Machinery Against Catastrophic Failu
Vibrating monitoring system / continuous - MG-4
MG-4 is ideal for the continuous monitoring of everything which has rotating parts.
It´s an excellent starting point for measuring the state of individual machines but will also serve as the mainstay of a future total online solution. A small and compact monitoring unit, sensors and a few cables are all you need. Simple to maintain, low...
It´s an excellent starting point for measuring the state of individual machines but will also serve as the mainstay of a future total online solution. A small and compact monitoring unit, sensors and a few cables are all you need. Simple to maintain, low...
Vibrating monitoring system / continuous - MG-4
MG-4 is ideal for the continuous monitoring of everything which has rotating parts.
It´s an excellent starting point for measuring the state of individual machines but will also serve as the mainstay of a future total online solution. A small and compact monitoring unit, sensors and a few cables are all you need. Simple to maintain, low...
It´s an excellent starting point for measuring the state of individual machines but will also serve as the mainstay of a future total online solution. A small and compact monitoring unit, sensors and a few cables are all you need. Simple to maintain, low...
Vibrating monitoring system / continuous - CMM
The CMM system is a permanently installed, continuous condition monitoring system, consisting of transducers, converters and combined display and control modules.
The CMM system consists of one and two channel modules measuring shock pulses...
The CMM system consists of one and two channel modules measuring shock pulses...
Vibrating monitoring system / continuous - CMM
The CMM system is a permanently installed, continuous condition monitoring system, consisting of transducers, converters and combined display and control modules.
The CMM system consists of one and two channel modules measuring shock pulses on bearings, vibration severity according to ISO recommendations and temperature. The measuring results are output as analogue 4 - 20 mA signals, sent to display units with relay functions and/or to a PLC or another computerized monitoring and control system. Measuring ranges and alarm levels are selected according to the technical requirements. Remote warning via mobile phone can be used.
Transducer lines are automatically monitored for short and open circuit. Parts exposed to harsh environments are robust, non-corrosive, sealed or waterproof. EX-proof equipment is available. Using low voltage installations and signals, which are not sensitive to electric disturbance, CMM provides a safe and reliable monitoring system.
The CMM system consists of one and two channel modules measuring shock pulses on bearings, vibration severity according to ISO recommendations and temperature. The measuring results are output as analogue 4 - 20 mA signals, sent to display units with relay functions and/or to a PLC or another computerized monitoring and control system. Measuring ranges and alarm levels are selected according to the technical requirements. Remote warning via mobile phone can be used.
Transducer lines are automatically monitored for short and open circuit. Parts exposed to harsh environments are robust, non-corrosive, sealed or waterproof. EX-proof equipment is available. Using low voltage installations and signals, which are not sensitive to electric disturbance, CMM provides a safe and reliable monitoring system.
Vibrating monitoring system / continuous - max. 36 ch | VIBROCONTROL6000
The VIBROCONTROL 6000® safety monitoring system (VC-6000®) is a modular 19 rack based system designed for continuous protective and condition monitoring of machines using a wide range of permanently installed sensors. It combines knowledge...
Vibrating monitoring system / continuous - max. 36 ch | VIBROCONTROL6000
The VIBROCONTROL 6000® safety monitoring system (VC-6000®) is a modular 19 rack based system designed for continuous protective and condition monitoring of machines using a wide range of permanently installed sensors. It combines knowledge...
Vibrating monitoring system / continuous - VIBROCONTROL 4000
The universal - powerful cost-effective modular system for conventional safety monitoring.
Safety monitoring is employed in almost every industry when machines should be monitored for maintaining defined limit values. This provides protection for personnel...
Safety monitoring is employed in almost every industry when machines should be monitored for maintaining defined limit values. This provides protection for personnel...
Vibrating monitoring system / continuous - VIBROCONTROL 4000
The universal - powerful cost-effective modular system for conventional safety monitoring.
Safety monitoring is employed in almost every industry when machines should be monitored for maintaining defined limit values. This provides protection for personnel and machinery and also secures functionality and productivity. Today more machines are required to operate at their limits, or the capacity is increased during refurbishment. This means maintaining limits of capability must be accurately monitored.
Therefore guidelines for loading are determined and limits are defined. These are obtained from VDI, DIN, EN, ISO, API standards and guidelines and similar committees or recommendations of manufacturers.
VIBROCONTROL 4000 is the unsurpassed answer in quality and reliability. The digital signal processing method permits maximum flexibility for the monitoring modules to be adapted to the demands and requirements on site.
A special system security concept ensures high availability, reliability and interruption-free operation.
Safety monitoring is employed in almost every industry when machines should be monitored for maintaining defined limit values. This provides protection for personnel and machinery and also secures functionality and productivity. Today more machines are required to operate at their limits, or the capacity is increased during refurbishment. This means maintaining limits of capability must be accurately monitored.
Therefore guidelines for loading are determined and limits are defined. These are obtained from VDI, DIN, EN, ISO, API standards and guidelines and similar committees or recommendations of manufacturers.
VIBROCONTROL 4000 is the unsurpassed answer in quality and reliability. The digital signal processing method permits maximum flexibility for the monitoring modules to be adapted to the demands and requirements on site.
A special system security concept ensures high availability, reliability and interruption-free operation.
Vibrating monitoring system / continuous - 1 - 6 ch | VIBROCONTROL 6000™ Compact monitor
Uninterrupted and safe production and high machine uptime require a permanently installed monitoring strategy. VIBROCONTROL 6000TM Compact monitor belongs to a new,...
Vibrating monitoring system / continuous - 1 - 6 ch | VIBROCONTROL 6000™ Compact monitor
Uninterrupted and safe production and high machine uptime require a permanently installed monitoring strategy. VIBROCONTROL 6000TM Compact monitor belongs to a new, revolutionary generation of measuring and diagnosis devices that adapt easily to customer requirements for machine safety and uptime, thanks to a flexible hardware and software concept. There are over 200 powerful and price-optimized standard monitoring solution packages available for this instrument.
The VC-6000TM Compact monitor can also easily adapt to your monitoring needs please contact us to find out more about the ideal parameter configuration for your machinery!
The VC-6000TM Compact monitor can also easily adapt to your monitoring needs please contact us to find out more about the ideal parameter configuration for your machinery!
Vibration monitoring system bearing - VIBROCONTROL 1500
this powerful and low-priced solution enables measurement and monitoring of
Casing vibration
Rolling-element bearing condition
Temperature
simultaneously at 2 bearings of your machine. The acceleration...
Casing vibration
Rolling-element bearing condition
Temperature
simultaneously at 2 bearings of your machine. The acceleration...
Vibration monitoring system bearing - VIBROCONTROL 1500
this powerful and low-priced solution enables measurement and monitoring of
Casing vibration
Rolling-element bearing condition
Temperature
simultaneously at 2 bearings of your machine. The acceleration sensor AS-062/T1 integrates a temperature sensor in the housing besides the elements necessary for vibration measurement. With the mounting of the sensor all three measured variables are acquired simultaneously and expensive addtional components and wiring costs are unnecessary.
Vibration monitoring
Measurement of casing vibration is in accordance with the ISO Standard 10816. The two actual measured values are shown in the display, as well as their percentage values with respect to the set limit setpoint. A violation of the preset limit values is signalled visually (LED) as well as through the built-in relays for Alert and Danger alarms.
Casing vibration
Rolling-element bearing condition
Temperature
simultaneously at 2 bearings of your machine. The acceleration sensor AS-062/T1 integrates a temperature sensor in the housing besides the elements necessary for vibration measurement. With the mounting of the sensor all three measured variables are acquired simultaneously and expensive addtional components and wiring costs are unnecessary.
Vibration monitoring
Measurement of casing vibration is in accordance with the ISO Standard 10816. The two actual measured values are shown in the display, as well as their percentage values with respect to the set limit setpoint. A violation of the preset limit values is signalled visually (LED) as well as through the built-in relays for Alert and Danger alarms.
Vibration monitoring system bearing - VIBROCONTROL 1100
VIBROCONTROL 1100 for 2-channel measuring and monitoring of absolute bearing vibrations and rolling-element bearing condition using a standard acceleration sensor.
VIBROCONTROL 1100 uses the power of built-in micro-processor technology and the following...
VIBROCONTROL 1100 uses the power of built-in micro-processor technology and the following...
Vibration monitoring system bearing - VIBROCONTROL 1100
VIBROCONTROL 1100 for 2-channel measuring and monitoring of absolute bearing vibrations and rolling-element bearing condition using a standard acceleration sensor.
VIBROCONTROL 1100 uses the power of built-in micro-processor technology and the following features:
1 or 2-channel monitoring (2-channel multiplexed),
Either vibration velocity or acceleration sensors
Monitoring displacement, velocity or acceleration units, and rolling-element bearing condition (BCU),
Simple, time-saving setup via built-in display and keypad, without potentiometers, bridges or switches,
Selectable 115/230 VAC power; 0/4 mA DC output
2 limit relays plus OK sensor and health monitoring relay,
LCD display of measurements, setup and events logbook,
Serial linking to more VIBROCONTROL 1100 units and communication with PC software via an RS-232 interface,
Easy cabling by plug-in terminal connectors,
Internal self-test and high reliability level,
IP65 cast-aluminium housing.
VIBROCONTROL 1100 uses the power of built-in micro-processor technology and the following features:
1 or 2-channel monitoring (2-channel multiplexed),
Either vibration velocity or acceleration sensors
Monitoring displacement, velocity or acceleration units, and rolling-element bearing condition (BCU),
Simple, time-saving setup via built-in display and keypad, without potentiometers, bridges or switches,
Selectable 115/230 VAC power; 0/4 mA DC output
2 limit relays plus OK sensor and health monitoring relay,
LCD display of measurements, setup and events logbook,
Serial linking to more VIBROCONTROL 1100 units and communication with PC software via an RS-232 interface,
Easy cabling by plug-in terminal connectors,
Internal self-test and high reliability level,
IP65 cast-aluminium housing.