+7 (812) 645-08-06
Vibration monitoring systems
select brand
Vibrating monitoring system / continuous - PCH 1008/1014/1017, 2-3 Channel
The 3ch flexible monitor PCH 1014 is a multipurpose monitor with 3 channels, accepting vibration, pressure and temperature...
Vibrating monitoring system / continuous - PCH 1008/1014/1017, 2-3 Channel
The 3ch flexible monitor PCH 1014 is a multipurpose monitor with 3 channels, accepting vibration, pressure and temperature probes. Each channel can be individually configured to a wide range of settings, e.g. band pass signal conditioning with RMS detectors. PCH 1014 is very rugged and conforms to IP 67, making it ideal for stand-alone local monitoring of machine vibration and/or process parameters. It outputs AC, DC and is equipped with alarm relays.
Vibrating monitoring system / continuous - 2 - 4 channel | PCH 1028
This is a stand-alone diagnostic and vibration processors. It has a 2-4 channel that is meant for stand alone purposes.
The signal processing is depended on FFT-technology. It has a real time of 800 line full zoom FFT, envelope FFT and...
The signal processing is depended on FFT-technology. It has a real time of 800 line full zoom FFT, envelope FFT and...
Vibrating monitoring system / continuous - 2 - 4 channel | PCH 1028
This is a stand-alone diagnostic and vibration processors. It has a 2-4 channel that is meant for stand alone purposes.
The signal processing is depended on FFT-technology. It has a real time of 800 line full zoom FFT, envelope FFT and cepstrum that is directly connected to the monitor.
This device can monitor as many as 192 machine parts with their personal alarms.
The 4 process parameters can work with their own individual alarms. It can be sent to any machine controller where it can be graphically presented on the PC.It can also work on SCADA system.
As high as 4*8 seconds (19,2kHz bandwidth) live time waves can be stored which can be triggered by either the alarms or by the user.
It has a special CHT1009 WEB based control program it can transfer alarm as well as status over the internet. The setting can change with the help of a remote and transferred over the PC via Internet.
The signal processing is depended on FFT-technology. It has a real time of 800 line full zoom FFT, envelope FFT and cepstrum that is directly connected to the monitor.
This device can monitor as many as 192 machine parts with their personal alarms.
The 4 process parameters can work with their own individual alarms. It can be sent to any machine controller where it can be graphically presented on the PC.It can also work on SCADA system.
As high as 4*8 seconds (19,2kHz bandwidth) live time waves can be stored which can be triggered by either the alarms or by the user.
It has a special CHT1009 WEB based control program it can transfer alarm as well as status over the internet. The setting can change with the help of a remote and transferred over the PC via Internet.
Vibrating monitoring system / continuous - PCH 1072, 1 Channel
The PCH 1072 is a vibration monitor manufactured by PCH Engineering. It is suitable for use in various rotating machine applications.
The...
The...
Vibrating monitoring system / continuous - PCH 1072, 1 Channel
The PCH 1072 is a vibration monitor manufactured by PCH Engineering. It is suitable for use in various rotating machine applications.
The standard version features 1 channel, with a frequency range of 0.5Hz to 1kHz. The unit si equipped with selectable filters, and provides the user a selection between acceleration, velocity, or displacement.
The monitor offers an online and offline FFT, through connection with RS485 net. It can be installed in a DIN rail, or enclosed in an IP67-compliant housing.
The standard version features 1 channel, with a frequency range of 0.5Hz to 1kHz. The unit si equipped with selectable filters, and provides the user a selection between acceleration, velocity, or displacement.
The monitor offers an online and offline FFT, through connection with RS485 net. It can be installed in a DIN rail, or enclosed in an IP67-compliant housing.
Vibrating monitoring system / continuous - 10 - 1000 Hz | PCH 1270/1272
Vibration sensors are measured and monitored in the vibration level of simple rotating machinery has become economically possible, as PCH has introduced new cost effective...
Vibrating monitoring system / continuous - 10 - 1000 Hz | PCH 1270/1272
Vibration sensors are measured and monitored in the vibration level of simple rotating machinery has become economically possible, as PCH has introduced new cost effective vibration monitors. The new Compact Range of PCH monitors can be compared to electronic watch-dogs. Its a Price attractive alternative for users who want to prevent their machines from damaging vibrations. A bearing damage occurs due to undetected unbalance or misalignment of a machine and as a result, the machine runs for a very long time period and at a high vibration level. It avoids unscheduled production stops. A machine which is permanently monitored can reduce the needs of human.
Vibrating monitoring system / continuous - PCH 1290
The product protects the machinery as per EN13849 for safety related parts of control system. Safety guidelines state the need for redundancy and diagnostics in structure.According...
Vibrating monitoring system / continuous - PCH 1290
The product protects the machinery as per EN13849 for safety related parts of control system. Safety guidelines state the need for redundancy and diagnostics in structure.According to EN13849, the The series of Redundant Vibration Monitors from PCH Engineering is suitable for enhanced protection as permanently monitors critical and dangerous machinery. It is a price attractive alternative. The PCH solution is an integrated solution with two individual vibration monitors in single housing.It offers easy way of installation same as PCH compact range, requires only a M12 mounting stud. The frequency range is 10 to 1000 Hz with 2 alarm levels with individual
Vibrating monitoring system / continuous - Sentry G3
The Sentry G3, manufactured by Sensonics®, is a vibration monitoring that is designed with versatility and an...
Vibrating monitoring system / continuous - Sentry G3
The Sentry G3, manufactured by Sensonics®, is a vibration monitoring that is designed with versatility and an...
Vibrating monitoring system / continuous - 4 - 20 mA | DN2601/02
The DN2601/02 range of DIN rail-mountable vibration monitors, manufactured Sensonics LTD, are generally compatible with an array of transducer types in order to suit almost every vibration...
Vibrating monitoring system / continuous - 4 - 20 mA | DN2601/02
The DN2601/02 range of DIN rail-mountable vibration monitors, manufactured Sensonics LTD, are generally compatible with an array of transducer types in order to suit almost every vibration monitoring applications. Furthermore, this space-efficient single-channel unit provides dual-lever arms (positive / negative going) in combination with 4-20 mA outputs for PLC / DCS connections.
This device is specifically designed to operate with a vast range of 2-3 wire accelerometers and velocity transducers such that a versatile monitoring and a wide range of vibration parameter protection is achieved. Also, the DN2602 is suitable for connection to API670 eddy current proximity probe system necessary for the measurement of peak shaft vibration.
This device is specifically designed to operate with a vast range of 2-3 wire accelerometers and velocity transducers such that a versatile monitoring and a wide range of vibration parameter protection is achieved. Also, the DN2602 is suitable for connection to API670 eddy current proximity probe system necessary for the measurement of peak shaft vibration.
Vibrating monitoring system / continuous / turbine - Sentry
The Sentry Model manufactured by Sensonics, is a turbine supervisory instrument that is available with a wide range of displacement,...
Vibrating monitoring system / continuous / turbine - Sentry
The Sentry Model manufactured by Sensonics, is a turbine supervisory instrument that is available with a wide range of displacement, speed and vibration measurements. This device is used for conditioning, protecting and monitoring the turbines. It is equipped with a measurement technique that is enhanced in the conjunction and comes with a power generation.
In addition, the Sentry turbine supervisory instrument is supplied with a speed, overspeed and phase marker.
In addition, the Sentry turbine supervisory instrument is supplied with a speed, overspeed and phase marker.
Collision monitoring device - CMS
The CMS Series, manufactured by Brankamp, is a collision process monitoring equipped...
Collision monitoring device - CMS
The CMS Series, manufactured by Brankamp, is a collision process monitoring equipped with an online process control terminals. It runs smoothly with Windows 95 and NT and supports integration of CAD drawings. This is used in applications involving boring and milling machines, robot and handling units, NC machines, and machining centers.
Collision monitoring device - CMS-GT
The CMS-GT Series, manufactured by Brankamp, is a collision process monitoring equipped...
Collision monitoring device - CMS-GT
The CMS-GT Series, manufactured by Brankamp, is a collision process monitoring equipped with an online process control terminals. It is ideal to work with Windows 95 and NT and supports integration of CAD drawings. This is used in applications involving boring and milling machines, robot and handling units, NC machines, and machining centers.