+7 (812) 645-08-06
Other dampers
select brand
Door damper - HDS-20
The Lapcon Dampers HDS is a heavy duty closing mechanisms designed to prevent...
Door damper - HDS-20
The Lapcon Dampers HDS is a heavy duty closing mechanisms designed to prevent flaps and lids from slamming down or flying open. The HDS are made from quality materials and recommended to be used in pairs for optimum performance. The HDS is LGA rated for 90,000 open and close cycles.
Door damper - OVN series
Load : 3 kg - 8 kg
The Lapcon OVN are soft closing mechanisms designed for over the top flipper doors....
The Lapcon OVN are soft closing mechanisms designed for over the top flipper doors....
Door damper - OVN series
The Lapcon OVN are soft closing mechanisms designed for over the top flipper doors. The unit uses a patented Lapcon technology that delivers a fluid and silent motion and prevents the door from slamming shut.
The OVN are rated to perform over 30,000 open and closing cycles to ensure reliability.
The OVN are rated to perform over 30,000 open and closing cycles to ensure reliability.
Door damper - OV-EZ series
Load : 2.5 kg - 11.5 kg
This item is suitable for assisting with operations such as flipper door opening, with minimal resistance. Note that...
This item is suitable for assisting with operations such as flipper door opening, with minimal resistance. Note that...
Door damper - OV-EZ series
This item is suitable for assisting with operations such as flipper door opening, with minimal resistance. Note that the doors will not slam shut in any situation. The product is also ideal for applications such as in kitchen and laboratory cabinets, but also overhead binder bins and many others.
The quality of the item has been repeatedly proven, with the product passing no less than 30,000 open/close cycle tests in the laboratory.
The quality of the item has been repeatedly proven, with the product passing no less than 30,000 open/close cycle tests in the laboratory.
Door damper / compact - SLUN series
Load : 2.5 kg - 5.2 kg
The unique swing mechanism designed by SLUM is suitable for lifting doors and holding them up. In addition to this, the design is compact...
The unique swing mechanism designed by SLUM is suitable for lifting doors and holding them up. In addition to this, the design is compact...
Door damper / compact - SLUN series
The unique swing mechanism designed by SLUM is suitable for lifting doors and holding them up. In addition to this, the design is compact and sleek, providing maximum access. The installation is an easy one, while the adjustable mounting plate is included in the package.
Next, the Lapcon technology is patented and offers quiet and smooth motion. The product has successfully passed no less than 30,000 open/close private cycle tests. Finally, note that the item was designed to operate at a temperature between 0 and 40 degrees Celsius.
Next, the Lapcon technology is patented and offers quiet and smooth motion. The product has successfully passed no less than 30,000 open/close private cycle tests. Finally, note that the item was designed to operate at a temperature between 0 and 40 degrees Celsius.
Hydraulic damper / medical / furniture - ø 15 - 40 mm | HB series
Diameter : 15 mm - 40 mm
Hydraulic Dampers from ACE are self-contained, maintenance-free and closed units that are used for precise control of speed in both directions of travel. The available body diameters...
Hydraulic Dampers from ACE are self-contained, maintenance-free and closed units that are used for precise control of speed in both directions of travel. The available body diameters...
Hydraulic damper / medical / furniture - ø 15 - 40 mm | HB series
Hydraulic Dampers from ACE are self-contained, maintenance-free and closed units that are used for precise control of speed in both directions of travel. The available body diameters range from 15 to 40mm with stroke lengths varying up to 800mm. These hydraulic dampers feature single- or double-acting versions. Various end fitting are available for easier installation and operation of these units.
The single-acting models provide damping effects in one direction, with free return in the opposite direction. The rod can be pulled out fully and turned to achieve the desired damping speed. The lock-up of the unit is prevented by an anti-lock guard that allows adjustment at any damping rate.
The single-acting models provide damping effects in one direction, with free return in the opposite direction. The rod can be pulled out fully and turned to achieve the desired damping speed. The lock-up of the unit is prevented by an anti-lock guard that allows adjustment at any damping rate.
Vibration damper / rubber - 3 - 50 lbs | AAM series
The vibration isolation mount (All-Attitude Mount) of the AAM product group delivers an isolation...
Vibration damper / rubber - 3 - 50 lbs | AAM series
The vibration isolation mount (All-Attitude Mount) of the AAM product group delivers an isolation effect that is effectively executed through a unique neoprene-elastomer insert. The isolation mount does not require even the minimal amount of maintenance. It is very fast and easy to install and has the capacity to minimize shock and vibration in all angles.
Vibration damper / for machines / rubber / neoprene - 110 - 2200 lbs | SFM series
The SFM product group has developed its durable, fail-safe, easy-to-install, maintenance-free and extremely effective isolation...
Vibration damper / for machines / rubber / neoprene - 110 - 2200 lbs | SFM series
The SFM product group has developed its durable, fail-safe, easy-to-install, maintenance-free and extremely effective isolation mounts. They are generally used with Neoprene, a damping material, in sets generated by diesel as well as marine engines. These isolators come in three sizes for different work processes. In addition, it is available from 110 lbs to 2,200 lbs. In the midst of product utilization, the SFM fail-safe isolators obtain a frequency of only up to 8 Hz.
Vibration damper / rubber - 4 - 18 lbs | BM series
The BM series of low frequency vibration dampers are designed to isolate vibrations...
Vibration damper / rubber - 4 - 18 lbs | BM series
The BM series of low frequency vibration dampers are designed to isolate vibrations in electronic parts, small scale devices and control units. The BM is normally applied in vertical compression loads, and has been used in protecting medical equipment and electronics from the effects of potentially harmful shocks and vibrations.
Vibration damper / rubber - max. 1200 lbs, -20 °F ... +180 °F | UMO series
The Rubber Metal Damper UMO (Universal Mount) features a galvanized metal spacer that is vulcanized into...
Vibration damper / rubber - max. 1200 lbs, -20 °F ... +180 °F | UMO series
The Rubber Metal Damper UMO (Universal Mount) features a galvanized metal spacer that is vulcanized into...
Suspension element rubber - 12.2058.0701
This ceiling element features NR black elastomer parts and a lightly, lubricated steel case....
Suspension element rubber - 12.2058.0701
This ceiling element features NR black elastomer parts and a lightly, lubricated steel case. Its design keeps it secure and protects against tearing off. Soft absorption of acceleration forces and large impact is enabled.
The rate of the springs takes precedence. This pure hangar element is ideally suited for elastic suspension of tubes and lamps.
The rate of the springs takes precedence. This pure hangar element is ideally suited for elastic suspension of tubes and lamps.
Suspension element rubber - 12.2130.0801
The GE 1227a rubber-metal bushings feature an elastomer component made out of black NR and a galvanized...
Suspension element rubber - 12.2130.0801
The GE 1227a rubber-metal bushings feature an elastomer component made out of black NR and a galvanized steel tube with chrome finish. They can absorb axial loads, angular loads and twists, and feature sockets composed out of an elastomer part embedded (under high pre-loading) between two cylindrical metal tubes. They are used as zero-maintenance bearings for wheel suspensions, and rotary springs.
Suspension element rubber - 12.2135.3148
The PHOENIX-MEGI rubber-metal bushing Type 735075, engineered by APSOparts, is characterized...
Suspension element rubber - 12.2135.3148
The PHOENIX-MEGI rubber-metal bushing Type 735075, engineered by APSOparts, is characterized by its 50 shore A durability. The product is made from a black NR elastomer part material and a phosphorated steel tube. These materials penetrate angular torsion, axial loads, and twists. In addition, it is best suited for wheel suspensions.