+7 (812) 645-08-06
Gearboxes for special applications
select brand
Right-angle gear reducer / electrical for asynchronous motors - 100 - 700 N
The RH/RA Series has standard-type 1:3-1:200 gear ratios with maximum permissible torque of...
Right-angle gear reducer / electrical for asynchronous motors - 100 - 700 N
The RH/RA Series has standard-type 1:3-1:200 gear ratios with maximum permissible torque of up to 40Nm. On the contrary, it has right angle-type 1:3-1:150 gear ratios and maximum permissible torque of up to 20Nm. Its linear gearheads have a 100mm to 700mm rack length with up to 1400Nm maximum permissible thrust force and 10, 25, 45 and 50mm/sec feed speed.
Valve actuator gear reducer - max. 10 846 Nm, max. 1 557 kN | IB/AS
Gear series IB/AS combination operators from Rotork are multi-turn gearboxes employed in manual or motorized systems that...
Valve actuator gear reducer - max. 10 846 Nm, max. 1 557 kN | IB/AS
Gear series IB/AS combination operators from Rotork are multi-turn gearboxes employed in manual or motorized systems that consist of globe, gate, sluice and penstock valves. The manual and motor torque range go up to 10,846Nm and 8.135Nm while manual and thrust range rev up to 10,846kN and 1,320kN respectively.
These units are filled with grease and enclosed in a case with removable output sleeve. They employ input flanges and twin input for low and high speed.
These units are filled with grease and enclosed in a case with removable output sleeve. They employ input flanges and twin input for low and high speed.
Dual-shaft gear reducer - DSIR
The Dual Speed Input Reducer (DSIR) manufactured by Rotork features two gearing ratios. The...
Dual-shaft gear reducer - DSIR
The Dual Speed Input Reducer (DSIR) manufactured by Rotork features two gearing ratios. The ratios (1:1 and 4.25:1) can be easily switched by pushing or pulling on the input shaft.
The DSIR functions with the use of any manual gearbox having an input flange of F14 or FA14. This device is designed to lessen the duration of operation for manual gearboxes.
The DSIR functions with the use of any manual gearbox having an input flange of F14 or FA14. This device is designed to lessen the duration of operation for manual gearboxes.
Custom gear reducer - max. 32 000 Nm | ILGS
The single acting override incorporates quarter turn gearboxes for spring return pneumatic actuators....
Custom gear reducer - max. 32 000 Nm | ILGS
The single acting override incorporates quarter turn gearboxes for spring return pneumatic actuators. The IP65 unit is made of cast iron housing, protected input shaft and axial needle bearing. They come in 10 sizes with 34:1 to 707:1 ratio and up to 32,000Nm (23,600 lbsft) torque range. They offer optional high and low temperature and optional ISO drive coupling
Pump gear reducer - 242 - 708 kW | 59000
Funk pump drives are highly flexible, and it is quite easy to fit your equipments into their drives, leaving you with no room for doubt at all. With their modular design, the company is able to deliver...
Pump gear reducer - 242 - 708 kW | 59000
Funk pump drives are highly flexible, and it is quite easy to fit your equipments into their drives, leaving you with no room for doubt at all. With their modular design, the company is able to deliver more than 5,000 configurations of torque, gear ratios, horsepower, hydraulic pump adapters, mounting options, and more options with their pump drives. If you are looking for a quiet operation, then consider the five-series pump drive ranging from 135-950 kW (101-708 hp). These are fashioned to operate from different options like independent mount or direct-engine mount, or as a clutch-driven unit. With their modular design and intelligent technology, the pump drives are offered at competitive pricing and with so many variable options; it is easy to make an accurate choice.