+7 (812) 645-08-06
Tapping units
select brand
Mechanical tapping unit - 50 mm, max. M8 | M.6
Tapping stroke 50 mm.
Unit is complete with forward and rear micro switches.
Brake motor is standard, it allows reversal...
Unit is complete with forward and rear micro switches.
Brake motor is standard, it allows reversal...
Mechanical tapping unit - 50 mm, max. M8 | M.6
Tapping stroke 50 mm.
Unit is complete with forward and rear micro switches.
Brake motor is standard, it allows reversal and immediate stop of the spindle as limit switches are operated.
In line lead screw enables tapping operation free of side loads on the quill.
Adjustable safety device it prevents breakage of the tap in a no hole situation.
Tool spindle:
ER11 Collet holder
It is essential to order the basic unit complete with the following necessary component:
lead screw
Unit is complete with forward and rear micro switches.
Brake motor is standard, it allows reversal and immediate stop of the spindle as limit switches are operated.
In line lead screw enables tapping operation free of side loads on the quill.
Adjustable safety device it prevents breakage of the tap in a no hole situation.
Tool spindle:
ER11 Collet holder
It is essential to order the basic unit complete with the following necessary component:
lead screw
Mechanical tapping unit - 100 mm, max. M16 | M.13
Tapping stroke 50 mm
Unit is complete with forward and rear end switches.
Brake motor is standard. It allows reversal and immediate stop of the spindle as micro switches are operated.
In line lead screw...
Unit is complete with forward and rear end switches.
Brake motor is standard. It allows reversal and immediate stop of the spindle as micro switches are operated.
In line lead screw...
Mechanical tapping unit - 100 mm, max. M16 | M.13
Tapping stroke 50 mm
Unit is complete with forward and rear end switches.
Brake motor is standard. It allows reversal and immediate stop of the spindle as micro switches are operated.
In line lead screw...
Unit is complete with forward and rear end switches.
Brake motor is standard. It allows reversal and immediate stop of the spindle as micro switches are operated.
In line lead screw...
Tapping unit - 75 mm, max. M14 | F.MUP10
Total stroke = 75 mm: 60mm working stroke 5 mm compensating stroke.
Fast-slow strokes are adjustable by setting the cam inside the unit.
The...
Fast-slow strokes are adjustable by setting the cam inside the unit.
The...
Tapping unit - 75 mm, max. M14 | F.MUP10
Total stroke = 75 mm: 60mm working stroke 5 mm compensating stroke.
Fast-slow strokes are adjustable by setting the cam inside the unit.
The unit features a double polarity brake motor and a precision axially compensated collet spindle, and an auxiliary micro-switch.
The drill-tap integral bit will, through the appropiate control circuit, perform a complete cycle ending with the tool withdrawal from the work-piece.
Tool holding options:
ER20 Compensated = AT20
collet holder
ER16 Compensated twin = V2.102.PFM
spindle head
Fast-slow strokes are adjustable by setting the cam inside the unit.
The unit features a double polarity brake motor and a precision axially compensated collet spindle, and an auxiliary micro-switch.
The drill-tap integral bit will, through the appropiate control circuit, perform a complete cycle ending with the tool withdrawal from the work-piece.
Tool holding options:
ER20 Compensated = AT20
collet holder
ER16 Compensated twin = V2.102.PFM
spindle head
Mechanical tapping unit - 50 mm, max. M16 | M.13
Tapping stroke 50 mm
Unit is complete with forward and rear end switches.
Brake motor is standard. It allows reversal and immediate stop of the spindle as micro switches are operated.
In line lead screw...
Unit is complete with forward and rear end switches.
Brake motor is standard. It allows reversal and immediate stop of the spindle as micro switches are operated.
In line lead screw...
Mechanical tapping unit - 50 mm, max. M16 | M.13
Tapping stroke 50 mm
Unit is complete with forward and rear end switches.
Brake motor is standard. It allows reversal and immediate stop of the spindle as micro switches are operated.
In line lead screw...
Unit is complete with forward and rear end switches.
Brake motor is standard. It allows reversal and immediate stop of the spindle as micro switches are operated.
In line lead screw...
Electromechanical tapping unit - 80 mm, max. M22 | M.17
Tapping screw 80 mm
Unit is complete with forward and rear end switches.
Brake motor is standard. It allows reversal and immediate stop of the spindle as micro switches are operated.
In line lead screw...
Unit is complete with forward and rear end switches.
Brake motor is standard. It allows reversal and immediate stop of the spindle as micro switches are operated.
In line lead screw...
Electromechanical tapping unit - 80 mm, max. M22 | M.17
Tapping screw 80 mm
Unit is complete with forward and rear end switches.
Brake motor is standard. It allows reversal and immediate stop of the spindle as micro switches are operated.
In line lead screw...
Unit is complete with forward and rear end switches.
Brake motor is standard. It allows reversal and immediate stop of the spindle as micro switches are operated.
In line lead screw...
Tapping unit - max. 1.5 kW | GSE series
In the tapping units for cutting and shaping, the lead screw is positioned...
Tapping unit - max. 1.5 kW | GSE series
In the tapping units for cutting and shaping, the lead screw is positioned directly in the feed axis so that flexural stress that could cause premature wear is avoided. Optionally, multi-spindle heads and special devices as well as clamping elements can be attached.
Mechanical tapping unit - M 12, max. 600 N/mm² | CTR-GEW-65
mechanic feed over lead screw (lead up to 2,0 mm)
Technical Description
...
Technical Description
...
Mechanical tapping unit - M 12, max. 600 N/mm² | CTR-GEW-65
mechanic feed over lead screw (lead up to 2,0 mm)
Technical Description
...
Technical Description
...