+7 (812) 645-08-06
Tapping units
select brand
Precision tapping unit - GEM6
Somex's GEM6 is part of the company's line of tapping units. This device features built-in pneumatic...
Precision tapping unit - GEM6
Somex's GEM6 is part of the company's line of tapping units. This device features built-in pneumatic rapid spindles that enable shorter cycle times, linear scales for simple depth modification applications, and precision tapping capabilities, based on comprehensive ground leadscrew assembly mechanisms. It also showcases direct combination of both rotary and linear movements.
Tapping unit - GEM12
The GEM 12 by Suhner® is a self-contained, programmable tapping unit. It is designed without a leadscrew, including an electric control box with AC-frequency inverter drive.
This can...
This can...
Tapping unit - GEM12
The GEM 12 by Suhner® is a self-contained, programmable tapping unit. It is designed without a leadscrew, including an electric control box with AC-frequency inverter drive.
This can...
This can...
Tapping unit - MAX28TE
The MAX28TE by Somex is a Tapping unit which is known for its manufacturer that is leading producer of machining unit. For its new line product, it has added...
Tapping unit - MAX28TE
The MAX28TE by Somex is a Tapping unit which is known for its manufacturer that is leading producer of machining unit. For its new line product, it has added various range of tapping units. The latest model MAX28TE has a capacity that is based from other models such as GEM20 and MAX48T. This unit is designed to suit for larger diameter and a base which is supported by a reliable BEM28. For this specific model, it has a capability of 120 Nm in its torque and 200 mm for its stroke. Also, it has a tap which can be M 24 x 3 mm or M 48 x 2 mm in a 600 N/mm2 steel. Also, its has a thread pitch range that is 0.5 to 3 mm.
Tapping unit - GEM8
The GEM8 is a tapping unit with a 60-mm total stroke. The leadscrew assembly is lubricated...
Tapping unit - GEM8
The GEM8 is a tapping unit with a 60-mm total stroke. The leadscrew assembly is lubricated in oil bath. The unit can be installed simply by removing 4 screws. The front and rear stroke can be adjusted by using 2 screws.
In order to avoid excessive start up cutting forces, the unit comes with a safety equipment.
In order to avoid excessive start up cutting forces, the unit comes with a safety equipment.
Tapping unit - GEM20C
This precision tapping unit is developed by Otto Suhner AG. It is consisting...
Tapping unit - GEM20C
This precision tapping unit is developed by Otto Suhner AG. It is consisting of spindle housing, drive, quill, and spindle similar with the BEM 20, BEM 25 H, and BEA 25 CNC models. In addition, the lead screw assemblies of this unit can be interchanged in a matter of five minutes.
Precision tapping unit - GEM 6
The GEM 6 Series of Precision Tapping Unit, manufactured by Otto Suhner AG, is designed with quick advance...
Precision tapping unit - GEM 6
The GEM 6 Series of Precision Tapping Unit, manufactured by Otto Suhner AG, is designed with quick advance feature. This device has linear scale used for easy depth adjustment. It can also work in an accurate tapping that is based on high-precision ground lead screw assembly.
Moreover, this product has direct integration of rotary and linear motion ensuring an absolute pitch conversion.
Moreover, this product has direct integration of rotary and linear motion ensuring an absolute pitch conversion.
Precision tapping unit - GEM 12
The GEM 12 is manufactured by Otto Suhner AG. It is an autonomous tapping unit, that is equipped with a programmable mechanical feed system....
Precision tapping unit - GEM 12
The GEM 12 is manufactured by Otto Suhner AG. It is an autonomous tapping unit, that is equipped with a programmable mechanical feed system. The GEM 12 does not have a lead screw, only an electric control box with AC-frequency inverter drive. The interchangeable timing belts and pulleys, allows all pitch sizes for M2 up to M12 between 64 and 13 TPI.
To guarantee protection, the GEM 12 is safeguarded against electro-mechanical crash. This protection is made possible by an integrated spring/clutch assembly and feedback from linear scale device.
To guarantee protection, the GEM 12 is safeguarded against electro-mechanical crash. This protection is made possible by an integrated spring/clutch assembly and feedback from linear scale device.
Precision tapping unit - GEM 8
The GEM 8 Series of Precision Tapping Unit, manufactured by Otto Suhner AG, is designed with a...
Precision tapping unit - GEM 8
The GEM 8 Series of Precision Tapping Unit, manufactured by Otto Suhner AG, is designed with a lead screw assembly which is permanently lubricated in an oil bath. Its simple installation is given through its four screws at the front of the device.
Moreover, the provided front and rear stroke adjustments are built with two screws at the rear motor enclosure.
Moreover, the provided front and rear stroke adjustments are built with two screws at the rear motor enclosure.
Precision tapping unit - GEM 20
The GEM 20 is a tapping machine with an integrated lead screw. The lead screw...
Precision tapping unit - GEM 20
The GEM 20 is a tapping machine with an integrated lead screw. The lead screw are interchangeable in less than 5 minutes. The unit features simple and accurate stroke a adjustments with 2 linear scales. Its total stroke is 100 mm. The thread pitch range of the machine is from 0,4 to 2, 5.
Tapping unit - 0.16 kW | LS 22
The LS 22 is a tapping unit developed by E2 Systems. It is consisting of a vane motor which is powered...
Tapping unit - 0.16 kW | LS 22
The LS 22 is a tapping unit developed by E2 Systems. It is consisting of a vane motor which is powered by compressed air, a planetary gearbox, lead screw, nut and a follower with cams for activation of built-in switches. For its specifications, it can work with a power of 160 W in a speed that ranges from 240 rpm up to 2400 rpm. In addition, the torque of this tapping unit ranges from 10.8 Nm up to 1.1 Nm.
Electro-hydraulic tapping unit - 0.37 - 2.4 kW, 250 - 1 980 rpm | BEG 55
BEG 55 offers a powerful yet compact construction, being one of the latest electro-hydraulic series of units. In addition to the powerful electronic motor, which runs the spindle, the feed is powered hydraulically...
Electro-hydraulic tapping unit - 0.37 - 2.4 kW, 250 - 1 980 rpm | BEG 55
BEG 55 offers a powerful yet compact construction, being one of the latest electro-hydraulic series of units. In addition to the powerful electronic motor, which runs the spindle, the feed is powered hydraulically and controlled in the same way. Next, the hydraulic feed control makes it possible to use rapid advance and adjust the feed rate proportional to the pitch and the rpm.
The tapping spindle provides the unit with the necessary length compensation, while the series is available in two different taper options and multi-spindle heads. The construction is a compact, yet powerful one, while the integrated hydraulic system and the long stroke, of 120 mm, are other major advantages. It has a low noise level and high precision. Note that the power is between 370 and 2,400 W, while the speed is between 250 and 1,980 rpm.
The tapping spindle provides the unit with the necessary length compensation, while the series is available in two different taper options and multi-spindle heads. The construction is a compact, yet powerful one, while the integrated hydraulic system and the long stroke, of 120 mm, are other major advantages. It has a low noise level and high precision. Note that the power is between 370 and 2,400 W, while the speed is between 250 and 1,980 rpm.
Electro-pneumatic tapping unit - 0.25 - 1.2 kW, 270 - 1 900 rpm | BEG 48
The BEG-48 series is a range of electro-pneumatic units with modular layout. Their electric motor drives the spindle when the feed is pneumatic.
The adjustment...
The adjustment...
Electro-pneumatic tapping unit - 0.25 - 1.2 kW, 270 - 1 900 rpm | BEG 48
The BEG-48 series is a range of electro-pneumatic units with modular layout. Their electric motor drives the spindle when the feed is pneumatic.
The adjustment of the feed rate to be parallel to the pitch and the rpm, is made possible by the hydraulic feed control. The tapping spindle provides the required length compensation.
The series is available with JT2 taper or integrated ER32 chuck and multi-spindle heads. The units feature smart depth control and an optional linear transducer.
Their power ranges from 250 up to 1200 W while their speed ranges from 270 up to 1900 rpm. Their torque range is between 19.7 to 1.25 Nm.
The adjustment of the feed rate to be parallel to the pitch and the rpm, is made possible by the hydraulic feed control. The tapping spindle provides the required length compensation.
The series is available with JT2 taper or integrated ER32 chuck and multi-spindle heads. The units feature smart depth control and an optional linear transducer.
Their power ranges from 250 up to 1200 W while their speed ranges from 270 up to 1900 rpm. Their torque range is between 19.7 to 1.25 Nm.