+7 (812) 645-08-06
Magnetic chucks
select brand
Electro-permanent magnetic chuck / for grinding - max. 16 x 32" | LBP
The Walker LBP fine division electromagnetic chuck is extremely versatile suitable for both grinding and EDM operations. Its variable...
Electro-permanent magnetic chuck / for grinding - max. 16 x 32" | LBP
The Walker LBP fine division electromagnetic chuck is extremely versatile suitable for both grinding and EDM operations. Its variable holding power allows you to hold the workpiece accurately, so that there is just enough force to hold the workpiece in place. The magnetic surface pattern allows for simple and inexpensive tooling designs to hold intricately shaped workpieces. It simplifies complicated set ups with accurate repeatability. Sizes range from 4"x8" to 16"x32". Contact factory for detailed specs and pricing.
Permanent magnetic chuck - max. 12 x 48'' | CERAMAX
The Walker Ceramax is the most widely accepted permanent magnetic chuck in...
Permanent magnetic chuck - max. 12 x 48'' | CERAMAX
The Walker Ceramax is the most widely accepted permanent magnetic chuck in the machine tool industry. In addition to its ease of installation and operation, this Walker design offers the highest holding power available on the market. It simplifies complicated set-ups with accurate repeatability.
Electro-permanent magnetic chuck - max. 42 x 60'' | Interloc
This universal workholding chuck offers maximum effective holding on the widest range of workpiece shapes and sizes. Its effectiveness is considerably enhanced by the new low profile feature, which adds more head room under the wheel. Only...
Electro-permanent magnetic chuck - max. 42 x 60'' | Interloc
This universal workholding chuck offers maximum effective holding on the widest range of workpiece shapes and sizes. Its effectiveness is considerably enhanced by the new low profile feature, which adds more head room under the wheel. Only 3 1/2" in height, this low profile Interloc is a full 1 1/2" less than competitive units of the same type. This savings in height permits greater flexibility with added head room under the wheel to position the work or handle bulkier pieces. This results in savings in set up time and added productivity. It also reduces the chuck weight by 30% or more. The low profile is achieved with no loss of strength, precision or holding power. With the unique Walker Interloc design, more than 75% of the chuck's surface is major north or south poles, making it easier to locate workpieces without concern for locating poles. There is no wear loss due to the shallower polarity pattern in the replaceable top plate.
Permanent magnetic chuck - max. 600 x 300 mm | Neomicro²
The Neomicro², is new and improved, replacing the Neomicro.
This...
This...
Permanent magnetic chuck - max. 600 x 300 mm | Neomicro²
The Neomicro², is new and improved, replacing the Neomicro.
This...
This...
Permanent magnetic chuck - max. 16 x 32" | TBP
These transverse bar pole chucks are specially designed for smaller, thinner workpieces and tool steel. The magnetic poles and coils run across the...
Permanent magnetic chuck - max. 16 x 32" | TBP
These transverse bar pole chucks are specially designed for smaller, thinner workpieces and tool steel. The magnetic poles and coils run across the chuck, creating more pole area. This chuck, being special in design, offers superb holding power, but because they are custom made, we would only recommend them when careful investigation has shown that one of our standard chucks will definitely not fit the application. Selection of this design should only be made with the assistance of our Engineering Department. Model Smart Controls are recommended for all Walker Electromagnetic Chucks.
Magnetic chuck - MAGVAC
A clamping system for magnetic and non magnetic work pieces
Convert magnetic chucks into vacuum chucks using adapter plates and connecting to a vacuum pump in a fast manual process.
The chucks are available in standard...
Convert magnetic chucks into vacuum chucks using adapter plates and connecting to a vacuum pump in a fast manual process.
The chucks are available in standard...
Magnetic chuck - MAGVAC
A clamping system for magnetic and non magnetic work pieces
Convert magnetic chucks into vacuum chucks using adapter plates and connecting to a vacuum pump in a fast manual process.
The chucks are available in standard sizes 230x330, 410x330, 300x620 and 410x620mm. Pole extensions are available as accessories for the magnetic chuck.
The system offers high flexibility and can be used on various industrial machines with or without coolant.
To upgrade and use vacuum the adapter plates in steel are simply clamped to the magnetic base. The adapters are designed with grid on one surface for use with O-shaped seal and suitable for using Vac-Mats on the other.
This three-in-one technology is particularly cost effective when a large variety of parts and frequently changing part materials are involved. A changeover from magnetic to vacuum clamping technology is done in minutes.
Convert magnetic chucks into vacuum chucks using adapter plates and connecting to a vacuum pump in a fast manual process.
The chucks are available in standard sizes 230x330, 410x330, 300x620 and 410x620mm. Pole extensions are available as accessories for the magnetic chuck.
The system offers high flexibility and can be used on various industrial machines with or without coolant.
To upgrade and use vacuum the adapter plates in steel are simply clamped to the magnetic base. The adapters are designed with grid on one surface for use with O-shaped seal and suitable for using Vac-Mats on the other.
This three-in-one technology is particularly cost effective when a large variety of parts and frequently changing part materials are involved. A changeover from magnetic to vacuum clamping technology is done in minutes.
Electro-permanent magnetic chuck / for grinding
Magnetic chucks are made with Coaniax, Ferrite or Neodymium magnets. The electro-permanent kind guarantee...
Electro-permanent magnetic chuck / for grinding
Magnetic chucks are made with Coaniax, Ferrite or Neodymium magnets. The electro-permanent kind guarantee magnetic clamping even in the event of a power failure.
The holding force can be set up to a maximum value of 120 N/cm2. Magnetic clamping is indispensible for grinding, milling, EDM and other operations.
The Calamit technicians can suggest a best suited model for your specific needs.
The holding force can be set up to a maximum value of 120 N/cm2. Magnetic clamping is indispensible for grinding, milling, EDM and other operations.
The Calamit technicians can suggest a best suited model for your specific needs.