+7 (812) 645-08-06
Machining heads
select brand
Machining unit - BEX4
BEX 4 is a machining spindle machine that is designed for applications requiring high demands when it comes to cutting velocities, surface finish and precision. The 3 speed ranges extend up to 40,000 RPM, while the double ceramic bearing configuration contributes towards...
Machining unit - BEX4
BEX 4 is a machining spindle machine that is designed for applications requiring high demands when it comes to cutting velocities, surface finish and precision. The 3 speed ranges extend up to 40,000 RPM, while the double ceramic bearing configuration contributes towards the high performance of this device. In addition, the HSK 32 C interface is an intuitive one, with a run-out precision of 0.001 mm.
The precision ground mounting surface is of 0.005mm, parallel to the working axis, while the standard drive system is of 360 degrees, with free revolve. The spindle is equipped with a user friendly interface, to facilitate cooling of the tool internally. All functions are controlled via a CDD type servomotor. The machining spindles are engineered to enable them to be mounted inline, directly onto a UA 15 CNC slide unit.
There are several options available, including a version without a standard motor and drive system. Upon request, special spindles can also be provided, in accordance to the specifications of the customer.
The precision ground mounting surface is of 0.005mm, parallel to the working axis, while the standard drive system is of 360 degrees, with free revolve. The spindle is equipped with a user friendly interface, to facilitate cooling of the tool internally. All functions are controlled via a CDD type servomotor. The machining spindles are engineered to enable them to be mounted inline, directly onto a UA 15 CNC slide unit.
There are several options available, including a version without a standard motor and drive system. Upon request, special spindles can also be provided, in accordance to the specifications of the customer.
Machining unit - BEX15
The Model BEX 15 is a machining unit developed by Somex. It is built with high precision turning spindle suitable for speeds up to 18000 RPM. The unit is built with adapter flange for the...
Machining unit - BEX15
The Model BEX 15 is a machining unit developed by Somex. It is built with high precision turning spindle suitable for speeds up to 18000 RPM. The unit is built with adapter flange for the installation of different spindle heads and angle heads.
It is supplied with 4-point clamping set form C for manual tool clamping, and adapts to UA 30 and UA 35 slide units via the base plates. The standard framework is additionally delivered with 0.55 kW or 0.75 kW, and an optional 1.8 kW.
In addition, all the spindle options are available with coolant via the spindle application. The system can also be optionally equipped with frequency converter, direct drive servomotor, and front motor mounting upon request.
It is supplied with 4-point clamping set form C for manual tool clamping, and adapts to UA 30 and UA 35 slide units via the base plates. The standard framework is additionally delivered with 0.55 kW or 0.75 kW, and an optional 1.8 kW.
In addition, all the spindle options are available with coolant via the spindle application. The system can also be optionally equipped with frequency converter, direct drive servomotor, and front motor mounting upon request.
Machining unit - MAX40B
The MAX40B is one of the Somex's machining spindles. Its maximum torque is 400 nm. The power of its motor ranges from 1,5 up to 5,5 kW.
The standard spindles are ISO 40 - HSK 63.
The standard spindles are ISO 40 - HSK 63.
Machining unit - MAX45B
The Machining Spindle Model MAX45B is manufacture with a torque of 450 Nm. It is powered by a 1,5 to 5,5 kW motor. The unit is also equipped with ISO 40 - HSK 63 standard spindles.
Machining unit - MAX100B
The MAX100B by Somex is a Machining unit which comes with a spindle device....
Machining unit - MAX100B
The MAX100B by Somex is a Machining unit which comes with a spindle device. For this specific unit, it has a standard spindle that is compliant to different standard such as ISO 40, ISO 50 and HSK 100. Also, it comes with a torque of about 1000 Nm and a motor which is 5.5-15 kW.
Variable-angle machining head
The optional kit provides enlargement or reduction of the working range, in the SuperCombinata. The unit...
Variable-angle machining head
The optional kit provides enlargement or reduction of the working range, in the SuperCombinata. The unit is efficient for the production of an internal line boring, and an overlay welding. Also, the device is capable of external boring, flange facing, and tapping through the extra kits.
The equipment is available with different kits such as kit line for external boring, and line boring.
The equipment is available with different kits such as kit line for external boring, and line boring.
Variable-angle machining head - ø 400 - 800 mm
The Variable-angle machining head is manufactured by ELSA S.R.L. The kit enables...
Variable-angle machining head - ø 400 - 800 mm
The Variable-angle machining head is manufactured by ELSA S.R.L. The kit enables...
Machining unit - max. ø 25 mm | BEM 25 H
The BEM 25 H is a machining unit which is a combination of a quill feed design and a hydraulic feed control system. It also includes an integrated four-point clamping set for manual...
Machining unit - max. ø 25 mm | BEM 25 H
The BEM 25 H is a machining unit which is a combination of a quill feed design and a hydraulic feed control system. It also includes an integrated four-point clamping set for manual tool clamping. The application of electric motors for increased torque requirements is enabled through the model's technical design concept. The unit has a chrome-plated quill and a spindle housing which can extend the spindle life.
It has a maximum diameter drilling capacity of 25 mm. The also model works with spindle speeds that can go up to 10,000 rpm with an optional frequency converter. Its rapid advance and feed motion can be run externally.
The unit is designed for use in carbide tooling applications.
It has a maximum diameter drilling capacity of 25 mm. The also model works with spindle speeds that can go up to 10,000 rpm with an optional frequency converter. Its rapid advance and feed motion can be run externally.
The unit is designed for use in carbide tooling applications.
Machining unit - max. ø 28 mm | BEM 28
The BEM 28 series is manufactured by Suhner Automation, and is a machining tool that comes with a three-phase AC motor. The unit...
Machining unit - max. ø 28 mm | BEM 28
The BEM 28 series is manufactured by Suhner Automation, and is a machining tool that comes with a three-phase AC motor. The unit is ideal for use in a number of single-purpose operations. This model is housed in an enclosure made of sturdy cast iron. It features an embedded pneumatic feed together with an installed hydraulic brake cylinder which is intended for quick drive and operating stroke configurations.
The BEM 28 series also comes with accurate angular contract spindle bearings.
The BEM 28 series also comes with accurate angular contract spindle bearings.
CNC machining unit / 1-axis - max. ø 16 mm | BEA 16 CNC
The BEA 16 CNC is a machining unit that is an autonomous and programmable. It allows to work all types of machining functions such as drilling, reaming, tapping and countersinking. The working cycles can be programmed...
CNC machining unit / 1-axis - max. ø 16 mm | BEA 16 CNC
The BEA 16 CNC is a machining unit that is an autonomous and programmable. It allows to work all types of machining functions such as drilling, reaming, tapping and countersinking. The working cycles can be programmed along with a digital AC-servomotor, and there are very short cycle times of less than 2 seconds whenever there is a continuous load.
The variable spindle speeds can be programmed with the use of a frequency inverter for three basic speed ranges: 200–1200, 200–2400, 200–4670 RPM. These can also be adjusted with the use of interchangeable timing belt pulleys and timing belts. There is a chrome-plated quill and honed spindle housing available for prolonged service life.
The unit, along with the HSK40 spindle has a 4-point clamping set form C that is used for manual tool clamping.
The variable spindle speeds can be programmed with the use of a frequency inverter for three basic speed ranges: 200–1200, 200–2400, 200–4670 RPM. These can also be adjusted with the use of interchangeable timing belt pulleys and timing belts. There is a chrome-plated quill and honed spindle housing available for prolonged service life.
The unit, along with the HSK40 spindle has a 4-point clamping set form C that is used for manual tool clamping.
CNC machining unit / 1-axis - max. ø 25 mm | BEA 25 CNC
These quill feed units are made by SUHNER for over half a century that lead to the standardization of 4 basic types of machining units based on a modular component concept with common spindle housing, drive elements, quill and spindle, etc. All types of spindle motion...
CNC machining unit / 1-axis - max. ø 25 mm | BEA 25 CNC
These quill feed units are made by SUHNER for over half a century that lead to the standardization of 4 basic types of machining units based on a modular component concept with common spindle housing, drive elements, quill and spindle, etc. All types of spindle motion profiles can be performed by the mechanical feed version BEA 25 CNC with digital drive technology. It has a drilling capacity with a max dia of 25mm.
This is suitable for carbide drilling and tapping tools including special purpose tooling. It is designed to accommodate high speed and feed rates. There is a preloaded ball screw and nut assembly for accurate spindle positioning. For extended service life, Chrome plated quill and honed spindle housing is provided.
There is a rigid cast housing with integrated base plate. The spindle can speed up to 10 000 RPM with optional frequency inverter. It is designed for multiple spindle head application.
An integrated 4-point clamping set form C for manual tool clamping is included in BEA 25 CNC with HSK spindle.
This is suitable for carbide drilling and tapping tools including special purpose tooling. It is designed to accommodate high speed and feed rates. There is a preloaded ball screw and nut assembly for accurate spindle positioning. For extended service life, Chrome plated quill and honed spindle housing is provided.
There is a rigid cast housing with integrated base plate. The spindle can speed up to 10 000 RPM with optional frequency inverter. It is designed for multiple spindle head application.
An integrated 4-point clamping set form C for manual tool clamping is included in BEA 25 CNC with HSK spindle.
Machining unit - max. ø 15 mm | BEX 15
The BEX 15 is a unit manufactured by Suhner company. It is a machining spindle...
Machining unit - max. ø 15 mm | BEX 15
The BEX 15 is a unit manufactured by Suhner company. It is a machining spindle with a torque that measures 55Nm and a motor rating of 0.55 to 1.8 kW. Further, its concentric capacity is at 0.01 mm. The unit has an adapter flange is designed for the installation of multiple spindle heads and angle heads.