+7 (812) 645-08-06
Machining heads
select brand
Milling head - max. 16 000 rpm
The electrohead is designed with a HSK-A100 tool clamping, and an automatic tool...
Milling head - max. 16 000 rpm
The electrohead is designed with a HSK-A100 tool clamping, and an automatic tool changer. The unit provides a vibration sensor, and an axis control. Also, the device utilizes a liquid cooling system, and an asynchronous motor.
In addition, the electrohead is constructed with a dimension of 265 mm x 323 mm.
In addition, the electrohead is constructed with a dimension of 265 mm x 323 mm.
Variable-angle machining head - ø 200 mm | SKU 200
The SKU 200 is manufactured by PEISELER. This variable-angle machining...
Variable-angle machining head - ø 200 mm | SKU 200
The SKU 200 is manufactured by PEISELER. This variable-angle machining head has a maximum load capacity of 230 kg, and can run at at speed of 33 rpm. In addition, the bearing diameter of the SKU 200 is 190 mm x 130 mm, and the maximum center bore diameter is 38 mm.
Variable-angle machining head - ø 520 mm | SKU 520
Peiseler's SKU 520 is a NC swivel head designed to combine the machining...
Variable-angle machining head - ø 520 mm | SKU 520
Peiseler's SKU 520 is a NC swivel head designed to combine the machining spindles. The tool has a loading capacity to load up to 1.000 kg and a maximum of 30 Rpm revolutions per minute. This equipment also features maximum tilting moment at the axis of rotation with 16.000 Nm.
Variable-angle machining head - ø 355 mm | SKD 355
The SKD 35 provides 50 revolutions each minute. The unit offers a unit weight of 310 kg, and content capacity...
Variable-angle machining head - ø 355 mm | SKD 355
The SKD 35 provides 50 revolutions each minute. The unit offers a unit weight of 310 kg, and content capacity of 650 kg. It is designed with a middle bore diameter of 100 mm, and bearing size of 300 mm x 200 mm.
In addition, the equipment features a tilting moment of 3,200 Nm, and torque with actuated clamping of 1,800 Nm. It utilizes a horizontal rotational axis, and hydraulic clamping version.
In addition, the equipment features a tilting moment of 3,200 Nm, and torque with actuated clamping of 1,800 Nm. It utilizes a horizontal rotational axis, and hydraulic clamping version.
Variable-angle machining head - KEW - Kit for External Work
The KEW from Sir Meccanica is a unit used for the machining of pins and cylindrical projecting bodies. The construction with several degrees of freedom, framed onto the body to be machined, enables the set...
Variable-angle machining head - KEW - Kit for External Work
The KEW from Sir Meccanica is a unit used for the machining of pins and cylindrical projecting bodies. The construction with several degrees of freedom, framed onto the body to be machined, enables the set up of the W machine tool that will carry out the external turning operation.
The kit enables good centering of the equipment on the cylindrical body. This is due to its swivels and flexible components. This design is provided with systems for rugged and fine adjustment.
These are significant for reaching the needed geometric tolerances. The system is flexible in a planar, as well as axial way. The cut ensures a good surface coating, reliability and vibration dumping. This is created by an orbiting tool with a low number of revolutions, and a system with an adjusting tailstock.
The kit enables good centering of the equipment on the cylindrical body. This is due to its swivels and flexible components. This design is provided with systems for rugged and fine adjustment.
These are significant for reaching the needed geometric tolerances. The system is flexible in a planar, as well as axial way. The cut ensures a good surface coating, reliability and vibration dumping. This is created by an orbiting tool with a low number of revolutions, and a system with an adjusting tailstock.
Variable-angle machining head - MFH
The MFH is specifically designed to provide a good quality performance and functionality....
Variable-angle machining head - MFH
The MFH is specifically designed to provide a good quality performance and functionality. It is considered as a new motorized head which is mainly constructed to enable the orthogonal facing of planes or creation of circlip grooves with the optimized accuracy on diameters which ranges from 130 mm to 1200 mm.