+7 (812) 645-08-06
Lathe power chucks
select brand
Stationary chuck - ø 80 - 315 mm | US-CL/US-A
Static hydraulic gripping units Ø 80 - 315
■ static cylinder + chuck units
■ closed center chucks type CL/AN/AL
Application/customer’s benefit
Gripping...
■ static cylinder + chuck units
■ closed center chucks type CL/AN/AL
Application/customer’s benefit
Gripping...
Stationary chuck - ø 80 - 315 mm | US-CL/US-A
Static hydraulic gripping units Ø 80 - 315
■ static cylinder + chuck units
■ closed center chucks type CL/AN/AL
Application/customer’s benefit
Gripping...
■ static cylinder + chuck units
■ closed center chucks type CL/AN/AL
Application/customer’s benefit
Gripping...
3-jaw chuck / lathe / pneumatic - ø 165 - 315 mm | PBI-D/PBI-C
Rotating pneumatic chuck fixtures for indexing tables
- Ø 165 - 315 mm
- 2 and 3 jaws
Application/customers benefit
Self centering rotating chuck fixtures with a pneumatic manifold used on indexing tables,...
- Ø 165 - 315 mm
- 2 and 3 jaws
Application/customers benefit
Self centering rotating chuck fixtures with a pneumatic manifold used on indexing tables,...
3-jaw chuck / lathe / pneumatic - ø 165 - 315 mm | PBI-D/PBI-C
Rotating pneumatic chuck fixtures for indexing tables
- Ø 165 - 315 mm
- 2 and 3 jaws
Application/customers benefit
Self centering rotating chuck fixtures with a pneumatic manifold used on indexing tables,...
- Ø 165 - 315 mm
- 2 and 3 jaws
Application/customers benefit
Self centering rotating chuck fixtures with a pneumatic manifold used on indexing tables,...
Stationary chuck / 3-jaw - ø 125 - 280 mm | STP
Pneumatic chuck fixtures with built-in cylinder
- Ø 125 - 280 mm
- with THROUGH-HOLE
Application/customers benefit
Self centering...
- Ø 125 - 280 mm
- with THROUGH-HOLE
Application/customers benefit
Self centering...
Stationary chuck / 3-jaw - ø 125 - 280 mm | STP
Pneumatic chuck fixtures with built-in cylinder
- Ø 125 - 280 mm
- with THROUGH-HOLE
Application/customers benefit
Self centering...
- Ø 125 - 280 mm
- with THROUGH-HOLE
Application/customers benefit
Self centering...
Automatic chuck / lathe / self-centering - ø 130 - 315 mm | PB-D, PB-C
PB-D INCH serration 2 or 3 jaws
PB-C Tongue & groove 3 jaws
Pneumatic chuck fixtures with built-in cylinder
- Ø 130 - 315 mm
- 2 and 3 jaws
Application/customer’s benefit
Self...
PB-C Tongue & groove 3 jaws
Pneumatic chuck fixtures with built-in cylinder
- Ø 130 - 315 mm
- 2 and 3 jaws
Application/customer’s benefit
Self...
Automatic chuck / lathe / self-centering - ø 130 - 315 mm | PB-D, PB-C
PB-D INCH serration 2 or 3 jaws
PB-C Tongue & groove 3 jaws
Pneumatic chuck fixtures with built-in cylinder
- Ø 130 - 315 mm
- 2 and 3 jaws
Application/customer’s benefit
Self...
PB-C Tongue & groove 3 jaws
Pneumatic chuck fixtures with built-in cylinder
- Ø 130 - 315 mm
- 2 and 3 jaws
Application/customer’s benefit
Self...
3-jaw chuck / lathe / closed-center - ø 130 - 315 mm | HB-D, HB-C
HB-D INCH serration 2 or 3 jaws
HB-C Tongue & groove 3 jaws
Hydraulic chuck fixtures with built-in cylinder
- Ø 130 - 315 mm
- 2 and 3 jaws
Application/customer’s...
HB-C Tongue & groove 3 jaws
Hydraulic chuck fixtures with built-in cylinder
- Ø 130 - 315 mm
- 2 and 3 jaws
Application/customer’s...
3-jaw chuck / lathe / closed-center - ø 130 - 315 mm | HB-D, HB-C
HB-D INCH serration 2 or 3 jaws
HB-C Tongue & groove 3 jaws
Hydraulic chuck fixtures with built-in cylinder
- Ø 130 - 315 mm
- 2 and 3 jaws
Application/customer’s...
HB-C Tongue & groove 3 jaws
Hydraulic chuck fixtures with built-in cylinder
- Ø 130 - 315 mm
- 2 and 3 jaws
Application/customer’s...
Diaphragm chuck / precision - TMAD series
Use: for second operations in turning, hardturning, grinding and checking
Very good accuracy and repeatability
Totallly sealed; maintenance-free
Supplied...
Very good accuracy and repeatability
Totallly sealed; maintenance-free
Supplied...
Diaphragm chuck / precision - TMAD series
Use: for second operations in turning, hardturning, grinding and checking
Very good accuracy and repeatability
Totallly sealed; maintenance-free
Supplied with quick change top jaws TMCR (patented TOBLER system) that allows change from one part to another without remachining of the top jaws, without setting time in less than one minute
Interchangeable jaws: hard jaws, smooth, corrugated, jaws with clamping fingers, or jaws with roller cage
Workpiece loading: manual automatic
Possibilities: air or coolant in the center, air sensing control on the workstop, facial clamping with rotating arms for distorted workpieces.
Very good accuracy and repeatability
Totallly sealed; maintenance-free
Supplied with quick change top jaws TMCR (patented TOBLER system) that allows change from one part to another without remachining of the top jaws, without setting time in less than one minute
Interchangeable jaws: hard jaws, smooth, corrugated, jaws with clamping fingers, or jaws with roller cage
Workpiece loading: manual automatic
Possibilities: air or coolant in the center, air sensing control on the workstop, facial clamping with rotating arms for distorted workpieces.
3-jaw chuck / lathe / closed-center - TMRM series
Chuck with concentric clamping by means of floating jaws and with pull back movement (max. 0.5 mm) to press the workpiece...
3-jaw chuck / lathe / closed-center - TMRM series
Chuck with concentric clamping by means of floating jaws and with pull back movement (max. 0.5 mm) to press the workpiece against the workstop
Clamping distribution for workpieces which can be deformed
Internal or external clamping
Very good accuracy and repeatability
Supplied with quick change top jaws TMCR that allows change from one part to another without remachining of the top jaws, without setting time in less than one minute.
Clamping distribution for workpieces which can be deformed
Internal or external clamping
Very good accuracy and repeatability
Supplied with quick change top jaws TMCR that allows change from one part to another without remachining of the top jaws, without setting time in less than one minute.
3-jaw chuck / lathe / through-hole - max. ø 120 mm | TMRBE series
Chuck with face driver for clamping shafts used...
3-jaw chuck / lathe / through-hole - max. ø 120 mm | TMRBE series
Chuck with face driver for clamping shafts used for turning operations
Transmission of high torque
Accuracy: high concentricity
Max. clamping diameter: 120 mm.
Transmission of high torque
Accuracy: high concentricity
Max. clamping diameter: 120 mm.
Automatic chuck / lathe / quick-change - TMCR series
Less than 1 minute to mount and remove a set of jaws
Accuracy...
Accuracy...
Automatic chuck / lathe / quick-change - TMCR series
Less than 1 minute to mount and remove a set of jaws
Accuracy 0.01 mm on any jaws
Internal and external clamping
Use: turning, milling, grinding and other operations
Used on our chucks TMAD and TMR o also on special chucks.
Accuracy 0.01 mm on any jaws
Internal and external clamping
Use: turning, milling, grinding and other operations
Used on our chucks TMAD and TMR o also on special chucks.
Automatic chuck / lathe / quick-change - HQC
Hardinge HQC Quick-Change collets can be changed from one size collet to another size in less than 20...
Automatic chuck / lathe / quick-change - HQC
Hardinge HQC Quick-Change collets can be changed from one size collet to another size in less than 20 seconds.
More Uptime on Multi-Spindle Automatics
The HQC System requires less draw bar force to adequately grip the bar, greatly reducing the breakage of closing fingers and pins common when the bar varies beyond the range of a standard solid collet or master collet with pads.
More Uptime on Multi-Spindle Automatics
The HQC System requires less draw bar force to adequately grip the bar, greatly reducing the breakage of closing fingers and pins common when the bar varies beyond the range of a standard solid collet or master collet with pads.
3-jaw chuck / lathe / through-hole - Sure-Grip®
Hardinge Sure-Grip Power Chucks are lever-operated, counter-centrifugal and dynamically balanced. This enables you to continually operate your CNC lathe at higher spindle speeds and feed rates with...
3-jaw chuck / lathe / through-hole - Sure-Grip®
Hardinge Sure-Grip Power Chucks are lever-operated, counter-centrifugal and dynamically balanced. This enables you to continually operate your CNC lathe at higher spindle speeds and feed rates with less concern for loss of jaw force normally associated with wedge-style chucks.
Sure-Grip Power Chucks mount directly to ANSI A2-4, A2-5, A2-6 and A2-8 spindles, eliminating the added tolerance buildup when using special adapter plates. Sure-Grip Power Chucks come standard with 1.5mm x 60 serrated master jaws designed to ISO specifications. Quick-change chucks available.
Hardinge manufactures a complete line of jaws for all brands of chucks.
Buy Collets, Collet Chucks, Chucks, Tool Holders and Rotary Products onlinline at www.shophardinge.com
Sure-Grip Power Chucks mount directly to ANSI A2-4, A2-5, A2-6 and A2-8 spindles, eliminating the added tolerance buildup when using special adapter plates. Sure-Grip Power Chucks come standard with 1.5mm x 60 serrated master jaws designed to ISO specifications. Quick-change chucks available.
Hardinge manufactures a complete line of jaws for all brands of chucks.
Buy Collets, Collet Chucks, Chucks, Tool Holders and Rotary Products onlinline at www.shophardinge.com