+7 (812) 645-08-06
Lathe power chucks
select brand
Stationary chuck - MX240 / 400 series
The Hydro Type MX240, is part of Maprox's 400 series. The tool is used in a wide...
Stationary chuck - MX240 / 400 series
The Hydro Type MX240, is part of Maprox's 400 series. The tool is used in a wide range of applications, such as safe loading of thin walled rings, and either external or internal loading. The device is equipped with loading force range of 500 up to 4500 daN. It also offers a hydraulic set and control options.
Stationary chuck - 940 - 16 650 N, 6 - 50 mm | MAS-G2 series
The MAS-G2 range of pneumatic clamping vises are engineered with an efficient wedge and piston design and equipped with mechanically limited strokes. they provide stroke lengths of 6 to 50 mm. They are housed in hardened steel enclosures while all functional components are also structured from hardened steel....
Stationary chuck - 940 - 16 650 N, 6 - 50 mm | MAS-G2 series
The MAS-G2 range of pneumatic clamping vises are engineered with an efficient wedge and piston design and equipped with mechanically limited strokes. they provide stroke lengths of 6 to 50 mm. They are housed in hardened steel enclosures while all functional components are also structured from hardened steel....
3-jaw chuck / lathe / closed-center - 12 000 - 200 000 N, 5 - 44 mm | MPA series
- Operating pressure range: max 60 bar
- Repeatability accuracy: MPA - 105 ... 175 0.02 mm
MPA - 210 ... 285 0.03 mm
MPA - 305 ... 360 0.05 mm
with 100 cycles
- Operating temperature...
- Repeatability accuracy: MPA - 105 ... 175 0.02 mm
MPA - 210 ... 285 0.03 mm
MPA - 305 ... 360 0.05 mm
with 100 cycles
- Operating temperature...
3-jaw chuck / lathe / closed-center - 12 000 - 200 000 N, 5 - 44 mm | MPA series
- Operating pressure range: max 60 bar
- Repeatability accuracy: MPA - 105 ... 175 0.02 mm
MPA - 210 ... 285 0.03 mm
MPA - 305 ... 360 0.05 mm
with 100 cycles
- Operating temperature...
- Repeatability accuracy: MPA - 105 ... 175 0.02 mm
MPA - 210 ... 285 0.03 mm
MPA - 305 ... 360 0.05 mm
with 100 cycles
- Operating temperature...
Lathe chuck / through-hole - 13 500 - 206 000 N, 3.8 - 44 mm | MPAF/3 series
The MPAF/3 series is a through-hole lathe power chuck. The operating pressure ranges from 2 to 12 bar with air, and a maximum of 50 bar with oil. The operating temperature...
Lathe chuck / through-hole - 13 500 - 206 000 N, 3.8 - 44 mm | MPAF/3 series
The MPAF/3 series is a through-hole lathe power chuck. The operating pressure ranges from 2 to 12 bar with air, and a maximum of 50 bar with oil. The operating temperature...
3-jaw chuck / lathe / pneumatic - 570 - 21 150 N, 6 - 50 mm | MAS-G3 series
The MAS - G3 series, manufactured by Omil®, is a pneumatic gripper with a 2 parallel finger, wherein it has a different variety of measurement...
3-jaw chuck / lathe / pneumatic - 570 - 21 150 N, 6 - 50 mm | MAS-G3 series
The MAS - G3 series, manufactured by Omil®, is a pneumatic gripper with a 2 parallel finger, wherein it has a different variety of measurement...
Stationary chuck / 3-jaw - 1 000 - 10 100 N, 6 - 32 mm | MFA series
The MFA series is a range of stationary 3-jaw-clamping chucks with the operating pressure range of 2 up to 8 bar. These devices' operating temperature range from -5 °C up...
Stationary chuck / 3-jaw - 1 000 - 10 100 N, 6 - 32 mm | MFA series
The MFA series is a range of stationary 3-jaw-clamping chucks with the operating pressure range of 2 up to 8 bar. These devices' operating temperature range from -5 °C up...
Lathe chuck - ø 7 - 170 mm | LAFF
The Lathe chuck LAFF Series is manufactured by RINGSPANN. This lathe chuck comes in a fully complete clamping...
Lathe chuck - ø 7 - 170 mm | LAFF
The Lathe chuck LAFF Series is manufactured by RINGSPANN. This lathe chuck comes in a fully complete clamping fixture that has a clamping diameter of 7 mm to 80 mm. The maximum permissible workpiece tolerance is IT11 and the short or long clamping length can be possible. It has thin walled or compact work pieces with impervious to ingress of foreign objects because of the rubberized slots in the bonded disc pack.
Lathe chuck - ø 7,8 - 73,6 mm | BKFF
The BKFF Model is a lathe chuck developed by Ringspann. It is mainly used for clamping diameters from 7.8 mm to...
Lathe chuck - ø 7,8 - 73,6 mm | BKFF
The BKFF Model is a lathe chuck developed by Ringspann. It is mainly used for clamping diameters from 7.8 mm to 73.6 mm.
The unit comes with ≤ 0,01 mm high true running accuracy, IT15 maximum permissible work piece tolerance, and an extended insertion depth.
In addition, the framework is supplied with pull-back against external backstop surface. The system is also suitable for thin-walled or solid work pieces.
The unit comes with ≤ 0,01 mm high true running accuracy, IT15 maximum permissible work piece tolerance, and an extended insertion depth.
In addition, the framework is supplied with pull-back against external backstop surface. The system is also suitable for thin-walled or solid work pieces.
Lathe chuck - ø 40 - 120,5 mm | HKFF
The Lathe chuck HKFF Series is manufactured by RINGSPANN. The product comes with a fully complete clamping...
Lathe chuck - ø 40 - 120,5 mm | HKFF
The Lathe chuck HKFF Series is manufactured by RINGSPANN. The product comes with a fully complete clamping fixture that has clamping diameters of 40 mm to 120.5 mm. The high true running accuracy is ≤ 0,01 mm while the maximum permissible work piece tolerance is IT13 and the product has extended insertion depth. Lastly, the product comes with a hand clamping that can be availed upon request.
Lathe chuck - ø 35 - 520 mm | KFFF
The KFFF is a flat element flange chucks that are made to clamp diameters from 90 mm to 260 mm. It...
Lathe chuck - ø 35 - 520 mm | KFFF
The KFFF is a flat element flange chucks that are made to clamp diameters from 90 mm to 260 mm. It features ≤ 0,01 mm high true running accuracy and a permissible workpiece tolerance up to IT11. It provides a very short clamping fixture length.
The chucks also feature a pull-back from the external backstop surface, the inner backstop pins and an external backstop ring.
The chucks also feature a pull-back from the external backstop surface, the inner backstop pins and an external backstop ring.
Lathe chuck - ø 40 - 340 mm | KOF
The Precision Clamping Chucks features clamping diameters from 40 mm to 340 mm, a highly-accurate...
Lathe chuck - ø 40 - 340 mm | KOF
The Precision Clamping Chucks features clamping diameters from 40 mm to 340 mm, a highly-accurate running speed of ≤ 0,01 mm, and a permissible work-piece tolerance from IT11 up to IT13. This device can produce a short clamping fixture. It has a pull-back feature, an internal backstop ring or pin, and an external backstop surface. A hand-clamping can also be availed.