+7 (812) 645-08-06
Honing machines
select brand
Vertical honing machine - max. ø 18" | HV series
Since 1907, Barnes Bore Honing and Finishing Systems has been considered a world leader in developing innovative new technology and processes to help manufacturers improve product performance,...
Vertical honing machine - max. ø 18" | HV series
Since 1907, Barnes Bore Honing and Finishing Systems has been considered a world leader in developing innovative new technology and processes to help manufacturers improve product performance, quality and cost. The earliest Barnes honing machines were the first-ever to make honing a practical and efficient means of finishing automotive cylinder bores in a production environment. As production requirements increased, so too did Barnes' ability to meet the need for greater speed, accuracy and efficiency. The long history of innovation has today culminated in a new generation of stand-alone machines and complete turnkey systems that deliver improvements in bore accuracy, surface finish, productivity and efficiency that were unimaginable just a decade ago.
Lapping machine - 84, 96, 120
For over 50 years, Lapmaster has served the precision optics industry through the innovative design...
Lapping machine - 84, 96, 120
For over 50 years, Lapmaster has served the precision optics industry through the innovative design and manufacture of high quality precision finishing systems and solutions. Lapmaster's diverse industry experience and extensive application knowledge facilitates the development of custom engineered optics finishing solutions capable of delivering the most precise, repeatable results.
Edge honing machine - IBX-12
The machine has been designed for edgehone inserts and for similar components. The machine, integrated with several electric components, comprises of bare and full enclosure. The machine has a...
Edge honing machine - IBX-12
The machine has been designed for edgehone inserts and for similar components. The machine, integrated with several electric components, comprises of bare and full enclosure. The machine has a rotary table that offers 12 workpiece spindles in 4 each group. the rotary table indexes 120 degrees with the help of a servo motor. The table is made to suspend with heavy duty ball bearing which offers a high amount of rigidity. The 12 workpieces are driven with the help of three servo motors. Each motor takes care of every spindle group. This makes it possible to rotate or index components to acquire the accurate honing. The honing process is performed by two independent brushing stations. Each brush is driven with the help of a 4 kW motor that ensures speed adjustments.
Edge honing machine - IBX-2/4
The IBX-2/4, manufactured by Osborn, is a sinjet edge honing machine that has been engineered to edge hone inserts and other small components. The frame of the machine is...
Edge honing machine - IBX-2/4
The IBX-2/4, manufactured by Osborn, is a sinjet edge honing machine that has been engineered to edge hone inserts and other small components. The frame of the machine is a welded steel frame that provides a robust structure. The control system and electric components are placed in a separate electric cabinet. The rotary table includes two spindles. One of the spindles is in loading/unloading position and the other one is in machining position. The programming is easy with the help of graphic menus. The programs that have been created can be stored in the industrial windows based PC. It has a maximum height of 15 mm, a maximum length of 40 mm and a table area of 2 x 180 degr.
Edge honing machine - IBX-4XE
The IBX-4XE is a edge honing machine that is integrated with a maximum of four spindles that are incorporated with new clamping chucks, and an individual...
Edge honing machine - IBX-4XE
The IBX-4XE is a edge honing machine that is integrated with a maximum of four spindles that are incorporated with new clamping chucks, and an individual...
Edge honing machine - RX-28
The RX-28 utilizes a metal indexable cutting tool, wherein its radius may be controlled accurately. The machine functions through the use of three brushes, as the rotary table and spindle rotates concurrently....
Edge honing machine - RX-28
The RX-28 utilizes a metal indexable cutting tool, wherein its radius may be controlled accurately. The machine functions through the use of three brushes, as the rotary table and spindle rotates concurrently. Also, the equipment is suitable for use in edge honing, polishing, or deburring of inserts.
The unit offers an automatic brush height compensation, for the brush wear. It also has a single spindle drive for each brush station. This component enables for the different settings in the spindle rotation speed, and direction.
In addition, the equipment is integrated with ball and groove precision guides, for controlling every brushing station. It consists of 28 spindles, which are placed inside the machine. Also, the unit provides different abrasive types, which are efficient for use in brushes.
The unit offers an automatic brush height compensation, for the brush wear. It also has a single spindle drive for each brush station. This component enables for the different settings in the spindle rotation speed, and direction.
In addition, the equipment is integrated with ball and groove precision guides, for controlling every brushing station. It consists of 28 spindles, which are placed inside the machine. Also, the unit provides different abrasive types, which are efficient for use in brushes.
Edge honing machine - C-48
For unsurpassed cost-saving potential, quality output and capacity, the Sinjet Edge-Honer is an ideal machine. Its edge-honing cost per insert is reduced tenfold...
Edge honing machine - C-48
For unsurpassed cost-saving potential, quality output and capacity, the Sinjet Edge-Honer is an ideal machine. Its edge-honing cost per insert is reduced tenfold when compared to conventional methods. The machine is ideal for all available types of inserts with existing geometrical shapes. There is no restriction on the size or shape of the edge which needs honing. Every insert can be made within tolerances, scrapping of inserts is non-existent. It has a high production rate and clean working environment for operating, and noise and dust are at minimum levels. Consistent quality of inserts is maintained and no additives are required.
Lapping machine - ø 381 mm | M.M. 8400
The Lapping machine M.M. 8400 Series is manufactured by LAM PLAN. The product...
Lapping machine - ø 381 mm | M.M. 8400
The Lapping machine M.M. 8400 Series is manufactured by LAM PLAN. The product has the possibility to lessen the cost to introduce in you workshop as a efficient and productive lapping method. It has the capability to respond to high specifications in terms of roughness and flatness.
Lapping machine - Ø 610 mm | M.M. 8600
The M.M. 8600 is a lapping machine engineered by Lam Plan. It is supplied with different accessories...
Lapping machine - Ø 610 mm | M.M. 8600
The M.M. 8600 is a lapping machine engineered by Lam Plan. It is supplied with different accessories for use in specific applications, such as micromechanics, watchmaking industry, electronics, and more.
The unit features a diameter plate of 610 mm. It has 4 rings with an inner diameter of 248 mm. The machine operates at a voltage rate of 230V, at a frequency rate of 50 Hz.
The unit features a diameter plate of 610 mm. It has 4 rings with an inner diameter of 248 mm. The machine operates at a voltage rate of 230V, at a frequency rate of 50 Hz.
Lapping machine - Ø 380 mm | M.M. 8380
The M.M 8380 is a lapping machine that is made up of a stainless steel. It is available in version...
Lapping machine - Ø 380 mm | M.M. 8380
The M.M 8380 is a lapping machine that is made up of a stainless steel. It is available in version E and version S.
This machine is made for in-series production and maintenance work. Both version have .37 kW of power and 3 rings. It showcases a 380-mm plate.
The E version of this component weighs at 160 kg, while the S version weighs at 215 kg.
This machine is made for in-series production and maintenance work. Both version have .37 kW of power and 3 rings. It showcases a 380-mm plate.
The E version of this component weighs at 160 kg, while the S version weighs at 215 kg.
Lapping machine - Ø 700 mm | M.M. 8700
The M.M 8700 is a lapping machine that is made up of a stainless...
Lapping machine - Ø 700 mm | M.M. 8700
The M.M 8700 is a lapping machine that is made up of a stainless steel. It is available in version E and version S. Both version have 2,2 kW of power and 3 rings. They have 700 mm plate.
The size of inner ring of the two versions is 275 mm.
The size of inner ring of the two versions is 275 mm.
