+7 (812) 645-08-06
Deburring machines
select brand
Chamfering and deburring machine - 72 x 64 mm | KFV
The KFV is a chamfering and deburring machine engineered by Alfra. It is driven by a motor with a power rate of 500 W, and a speed control range...
Chamfering and deburring machine - 72 x 64 mm | KFV
The KFV is a chamfering and deburring machine engineered by Alfra. It is driven by a motor with a power rate of 500 W, and a speed control range...
Straight edge chamfering and deburring machine - max. 5 mm | KFH 150
The KFH 150 Model is a straight edges chamfering and deburring machine developed by Alfra. It is manually operated tool for the deburring (45°) of larger...
Straight edge chamfering and deburring machine - max. 5 mm | KFH 150
The KFH 150 Model is a straight edges chamfering and deburring machine developed by Alfra. It is manually operated tool for the deburring (45°) of larger...
Straight edge chamfering and deburring machine - 4.5 mm | KFT 250
The KFT 250 is a chamfering and deburring machine engineered by Alfra. It is suitable for use in light and medium applications.
The machine performs deburring...
The machine performs deburring...
Straight edge chamfering and deburring machine - 4.5 mm | KFT 250
The KFT 250 is a chamfering and deburring machine engineered by Alfra. It is suitable for use in light and medium applications.
The machine performs deburring...
The machine performs deburring...
Straight edge chamfering and deburring machine - max. 14 mm | KFH 250
The model in this series is different from other similar products mainly because of the fact that it is a manually operated device. This item was developed for the processing of bevels, while the preparation of weld is possible to up to...
Straight edge chamfering and deburring machine - max. 14 mm | KFH 250
The model in this series is different from other similar products mainly because of the fact that it is a manually operated device. This item was developed for the processing of bevels, while the preparation of weld is possible to up to 60 degrees on large right-angled workpieces. This item is hence an indispensable helper when it comes to steel construction and engineering applications, while the easy handling and guiding with the use of support rollers are other major advantages.
As for the technical specifications, prism mounting is possible with a length of 250 mm and a width of 70 mm, while the shank cutter comes with dimensions of 12 mm, in accordance to the DIN 6527 standards. The maximum bevel width is of 14 mm, but this depends on the material. The rating of 1,800 W and the stepless RPM control complete the list of features, while the clamping neck diameter is of 63 mm. Finally, the item weighs 12.8 kg.
As for the technical specifications, prism mounting is possible with a length of 250 mm and a width of 70 mm, while the shank cutter comes with dimensions of 12 mm, in accordance to the DIN 6527 standards. The maximum bevel width is of 14 mm, but this depends on the material. The rating of 1,800 W and the stepless RPM control complete the list of features, while the clamping neck diameter is of 63 mm. Finally, the item weighs 12.8 kg.
Straight edge chamfering and deburring machine - max. 14 mm | KFT 500
The KFT 500 is a straight edges chamfering and deburring machine developed by Alfra. It is mainly used for medium and large sized work pieces. The unit comes with 14 mm maximum bevel width to...
Straight edge chamfering and deburring machine - max. 14 mm | KFT 500
The KFT 500 is a straight edges chamfering and deburring machine developed by Alfra. It is mainly used for medium and large sized work pieces. The unit comes with 14 mm maximum bevel width to...
Robotic deburring machine / high-pressure fluid jet
The AXIOME deburring machine uses extremely high pressure via a water/oil jet when deburring hard material parts using a pressure of 1000 to 3500 bar and when deburring...
Robotic deburring machine / high-pressure fluid jet
The AXIOME deburring machine uses extremely high pressure via a water/oil jet when deburring hard material parts using a pressure of 1000 to 3500 bar and when deburring soft materials a pressure of 250 to 1000 bar. This technology focuses on the fluid rate flow.
The deburring machine can be used on copper, aluminum alloys, brass, plastic by-products and on parts such as interior parts of watch mechanisms, pump bodies in the automotive industry, mechanical parts made of materials, locks parts, etc.
The triplex pump has a flow rate to a max of 30 I/min, and the deburring heads have a fixed/rotating jet.
The deburring machine can be used on copper, aluminum alloys, brass, plastic by-products and on parts such as interior parts of watch mechanisms, pump bodies in the automotive industry, mechanical parts made of materials, locks parts, etc.
The triplex pump has a flow rate to a max of 30 I/min, and the deburring heads have a fixed/rotating jet.
5-axis deburring machine / NC / gear tooth - max. ø 640 mm | KEM 502
The KEM Deburring Machine developed in WERA technical center is now built under FIMAT license. The machine is specially designed for deburring and chamfering special and bevel gears and is compatible with standard and...
5-axis deburring machine / NC / gear tooth - max. ø 640 mm | KEM 502
The KEM Deburring Machine developed in WERA technical center is now built under FIMAT license. The machine is specially designed for deburring and chamfering special and bevel gears and is compatible with standard and special tools. It features an optimized concept for short serials and various work parts. The tool features 5 degrees of liberty and is capable to perform any work part profile with extreme precision and speed. It is also suitable for other complex work part shapes that requires precise and sharp chamfering. The compact machine features a completely guarded working area, bedplate with quick & easy shaving discharge and continuous speed adjustment. Loading area is suitable for access with tackle and the high milling speed removes any secondary burrs. The axis of the machine is free from manual adjustments.