+7 (812) 645-08-06
Turning tools
select brand
Insert turning tool / carbide - Combi-Clamp
The Multi-Clamp System for T-Type Turning Holders from Ingersoll offers versatility, durability...
Insert turning tool / carbide - Combi-Clamp
The Multi-Clamp System for T-Type Turning Holders from Ingersoll offers versatility, durability and stability. It consists of three different clamps combinations that are mainly suited for T-type holders. The system is made out of the new carbide clamp that has good wear-resistance. Moreover, the clamp's adjustable gap structure increases its strength and stability.
Exterior turning tool - Gold-Duty HB
This product of Ingersoll features exclusive seat contact with a big convex surface and 3D geometry plus it is convertible...
Exterior turning tool - Gold-Duty HB
This product of Ingersoll features exclusive seat contact with a big convex surface and 3D geometry plus it is convertible with ISO Standard P-type holders. It also offers steady contact surface that comes along with quadruple rest pads and it utilizes a better chipbreaker that can be fitted for a slightly heavy machining.
It also features double sided turning insert, low cutting force and has an exclusive seat contact with a big convex surface.
It also features double sided turning insert, low cutting force and has an exclusive seat contact with a big convex surface.
Exterior turning tool - 40 mm | T-Force 40
Ingersoll's product offers two lever clamping for extensive stability along...
Exterior turning tool - 40 mm | T-Force 40
Ingersoll's product offers two lever clamping for extensive stability along with its geometry that has low cutting forces. Also, it has a 40 mm cutting edge that allows 1.5 inches cutting depth that is fitted for low to medium powered machines. Furthermore, it is available for left and right hand use.
Exterior turning tool - 50 mm | T-Force 50
The T-FORCE 50 of INGERSOLL are equipped with a 50 mm rectilinear shaped cutting edge...
Exterior turning tool - 50 mm | T-Force 50
The T-FORCE 50 of INGERSOLL are equipped with a 50 mm rectilinear shaped cutting edge that is applicable in large machining of wind power, shipbuilding, and power plant industries. It allows a wide range of cutting depths and can be integrated with HY and HD inserts for uninterrupted cutting and machining.
Small parts machining turning tool - T-Micro
The two piece design of the TMicro system consists of a sleeve and replaceable carbide inserts. The TMicro...
Small parts machining turning tool - T-Micro
The two piece design of the TMicro system consists of a sleeve and replaceable carbide inserts. The TMicro system is utilized for a broad range of applications which include boring, face grooving, turning and profiling.
The replaceable carbide inserts contain thru coolant. Internal machining can be started at 0.024" (.6mm). The TMicro system features TiAIN coating with sub-micron grade substrate.
The replaceable carbide inserts contain thru coolant. Internal machining can be started at 0.024" (.6mm). The TMicro system features TiAIN coating with sub-micron grade substrate.
Small parts machining turning tool - CoroTurn®
These extra small turning tools cover holes down to 1 mm in diameter. With a design conceived with small part machining in mind, the performance of CoroTurn is brought down to smaller bores than ever with...
Small parts machining turning tool - CoroTurn®
These extra small turning tools cover holes down to 1 mm in diameter. With a design conceived with small part machining in mind, the performance of CoroTurn is brought down to smaller bores than ever with the CoroTurn XS tooling solutions for internal turning, threading and grooving.
Four sizes of CXS-04, -05, -06 and -07 are included in the program, each available in different lengths for use in different applications and each with inserts for a range of hole diameters. The inserts fit into boring bars which have been designed with internal cutting fluid supply. They ensure chip evacuation and sufficient cooling as the inserts are directed at the cutting edge via to nozzles. The inserts locate precisely into the boring bars, which range in diameter from 10-25.4mm, due to a locating pin.
Four sizes of CXS-04, -05, -06 and -07 are included in the program, each available in different lengths for use in different applications and each with inserts for a range of hole diameters. The inserts fit into boring bars which have been designed with internal cutting fluid supply. They ensure chip evacuation and sufficient cooling as the inserts are directed at the cutting edge via to nozzles. The inserts locate precisely into the boring bars, which range in diameter from 10-25.4mm, due to a locating pin.
Exterior turning tool / interior
This product from Sandvick Coromant is a turning tool for internal and external turning metal operations...
Exterior turning tool / interior
This product from Sandvick Coromant is a turning tool for internal and external turning metal operations such as facing, boring, grooving, and threading. Its compact design is constructed out of durable materials. The turning process differs according the the shape and material of the workpiece, condition, type of operation applied, and requirements dictates the number of cutting tool factors.
Parting and grooving tool
The CoroCut 3 from the Sandvik Coromant series produces parts that are highly accurate and near to their length tolerances with its minimized parting widths of...
Parting and grooving tool
The CoroCut 3 from the Sandvik Coromant series produces parts that are highly accurate and near to their length tolerances with its minimized parting widths of 2,0 1,5 and 1,0 mm.
The shallow parting found between grooving operations, bars, and tubes features a third cutting edge that ensures precise cutting. It is designed with very tight indexing tolerances that are safeguarded by a clamping solution that keeps workpieces in tact to ensure precise output. The CoroCut 3 has a user-friendly interface built for user convenience, and can be used in a wide variety of applications that require grooving and parting.
The shallow parting found between grooving operations, bars, and tubes features a third cutting edge that ensures precise cutting. It is designed with very tight indexing tolerances that are safeguarded by a clamping solution that keeps workpieces in tact to ensure precise output. The CoroCut 3 has a user-friendly interface built for user convenience, and can be used in a wide variety of applications that require grooving and parting.
O-ring grooving tool - CoroCut®
CoroCut 3 provides a complete solution for applications such as grooving with narrow precision or circlip grooving, as it offers a full range...
O-ring grooving tool - CoroCut®
CoroCut 3 provides a complete solution for applications such as grooving with narrow precision or circlip grooving, as it offers a full range of insert width options, between 0.5 and 3.18mm. In addition to this, the high-performance grade GC1125, along with the sharp edge GS geometry makes the item unbeatable when it comes to productivity for grooving mass production and parting applications.
Another important choice, the CoroCut with GF geometry, and a width between 1.85 and 5.15mm, gives good productivity in various external operations.
Another important choice, the CoroCut with GF geometry, and a width between 1.85 and 5.15mm, gives good productivity in various external operations.
Mixed-flow grooving tool - CoroCut®
It is vital to choose the right tool holder for components with axial groove. The tool holder needs to be curved so that it can be adjusted according to the groove radius...
Mixed-flow grooving tool - CoroCut®
It is vital to choose the right tool holder for components with axial groove. The tool holder needs to be curved so that it can be adjusted according to the groove radius which is bent.
1- edged and 2-edged CoroCut grooving and turning inserts can be used. They come with RM, TF and GM geometries. Q-Cut 151.3 can be used for small first cut diameters. Q-Cut 151.3 with 7G and 7P geometry can be used. Feed methods to be used should be normal. Check the turning of grooves.
For small diameter range, dedicated CoroCut MB and CoroTurn XS can be used. They are available with face grooving inserts and width ranges from 1.0-3.0 mm.
1- edged and 2-edged CoroCut grooving and turning inserts can be used. They come with RM, TF and GM geometries. Q-Cut 151.3 can be used for small first cut diameters. Q-Cut 151.3 with 7G and 7P geometry can be used. Feed methods to be used should be normal. Check the turning of grooves.
For small diameter range, dedicated CoroCut MB and CoroTurn XS can be used. They are available with face grooving inserts and width ranges from 1.0-3.0 mm.
Parting and grooving tool - SA
The model SA performs radial grooving as well as parting off of materials with diameters of up to 5.512".
The unit...
The unit...
Parting and grooving tool - SA
The model SA performs radial grooving as well as parting off of materials with diameters of up to 5.512".
The unit works with a monoblock execution, which is robust and easy to handle. This comes with one spare part. It can work as a holder for swiss machining. SA modules, blades and camping blocks are also included in the unit. An active insert clamping function is also built into the model.
The unit also has double-sided inserts. An exact insert positioning can be done with a fix stop.
The unit works with a monoblock execution, which is robust and easy to handle. This comes with one spare part. It can work as a holder for swiss machining. SA modules, blades and camping blocks are also included in the unit. An active insert clamping function is also built into the model.
The unit also has double-sided inserts. An exact insert positioning can be done with a fix stop.
Micro grooving tool - min. ø 2.2 mm | MICRO
The MICRO is a grooving tool that is designed for various applications that possess...
Micro grooving tool - min. ø 2.2 mm | MICRO
The MICRO is a grooving tool that is designed for various applications that possess small diameter bores of .087''. The ground inserts are equipped with two cutting edges and various tool diameters and lengths can perform operations. In addition, specific bore sizes and depths are also accommodated with these tools.
Mixed-flow grooving tool - SAV
The SAV by Arno is a mixed flow grooving tool which comes with an internal coolant...
Mixed-flow grooving tool - SAV
The SAV by Arno is a mixed flow grooving tool which comes with an internal coolant feed designed for optimum cooling at its cutting edges. Also, it comes with a solid carbide inserts having a minimum bore of 0.393" (10 mm) and grooving depth of 1.575" (40 mm). For customer customization, it can be ordered upon request.
Interior grooving tool - min. ø 28 mm | SIN
The SIN series of boring bars are engineered for inner grooving applications. The indexable...
Interior grooving tool - min. ø 28 mm | SIN
The SIN series of boring bars are engineered for inner grooving applications. The indexable insert is optimally clamped with strong holders for precise processes. This unit is also equipped with a set of precision inserts that are usable for all operations and materials. THe insert life is also prolonged through the cooling process.
Interior grooving tool - min. ø 29.5 mm | SIS
The SIS indoor grooving tool is developed by Arno. It is specifically designed to cater applications...
Interior grooving tool - min. ø 29.5 mm | SIS
The SIS indoor grooving tool is developed by Arno. It is specifically designed to cater applications that include internal grooving and turning with high rigidity and performance. This grooving tool is equipped with compact and strong holders to deliver high cutting effectiveness. In addition, the positive locking and strong clamping of the insert allows reliable process.