+7 (812) 645-08-06
Turning tools
select brand
Grooving tool - RAG series
The CeramTec offers a wide array of grooving systems that provide excellent external grooving, internal grooving, axial grooving and undercutting with SPK® ceramic...
Grooving tool - RAG series
The CeramTec offers a wide array of grooving systems that provide excellent external grooving, internal grooving, axial grooving and undercutting with SPK® ceramic...
Multiple grooving tool
The CeramTec series of grooving systems are designed for internal and external grooving, undercutting, and axial grooving, with SPK® cermet, CBN,...
Multiple grooving tool
The CeramTec series of grooving systems are designed for internal and external grooving, undercutting, and axial grooving, with SPK® cermet, CBN,...
Exterior turning tool - CC series
The CeramTec IKS clamping system is optimized for turning applications with work pieces made of steel, hardened steel, cast iron, and other particularly difficult materials. The...
Exterior turning tool - CC series
The CeramTec IKS clamping system is optimized for turning applications with work pieces made of steel, hardened steel, cast iron, and other particularly difficult materials. The system is specifically designed to perform machining and clamping operations in difficult working conditions with frequent cut load changes and pulling cuts.
The IKS-PRO Clamping System is equipped with five clamping types: the center hole type, smooth type, and notch type modules. These modules are developed to enable high productivity in specific operations, due to high cutting standards.
The series may also be enhanced with an IKS-PRO extension for process reliability and efficient material handling.
The IKS-PRO Clamping System is equipped with five clamping types: the center hole type, smooth type, and notch type modules. These modules are developed to enable high productivity in specific operations, due to high cutting standards.
The series may also be enhanced with an IKS-PRO extension for process reliability and efficient material handling.
Slot milling cutter - KVNS, SN, KSSM™ series
The KTMS Indexable T-Slot Cutter enables the preparation of a workpiece with a slot...
Slot milling cutter - KVNS, SN, KSSM™ series
The KTMS Indexable T-Slot Cutter enables the preparation of a workpiece with a slot and honed insert edges. It provides feed rates ranging from 0.10-0.15mm, since vibration would occur if lower feed rates were used. Chips can be evacuated by using air flow. The cutting process must always be started with a new cutting edge.
Turning tool - KENCLAMP, KENDEX series
Kennametal includes Kenclamp in their Kendex series with its long line of quality...
Turning tool - KENCLAMP, KENDEX series
Kennametal includes Kenclamp in their Kendex series with its long line of quality industry tool. It belongs to the inch dimension tool for D-style clamping and negative style inserts.
Metric and inch style tool holders that are top of the notch available in Kenloc, Wedgelock, Kendex, Screw-On, V-Bottom, and positiveprofiling
Metric and inch style tool holders that are top of the notch available in Kenloc, Wedgelock, Kendex, Screw-On, V-Bottom, and positiveprofiling
Turning tool with internal coolant - Beyond™ Blast™
This insert platform is a device that can be used for a wide variety of applications...
Turning tool with internal coolant - Beyond™ Blast™
This insert platform is a device that can be used for a wide variety of applications with titanium and other high-temperature alloys. It multiplies too life three-fold through the innovative Beyond Blast. This product directly brings the coolant to the cutting rim where the material and the insert would be integrated.
Lathe threading tool / insert / indexing - Top Notch™, LT series
The Laydown Triangle Threading, and the Top Notch, are metalworking tools that are manufactured...
Lathe threading tool / insert / indexing - Top Notch™, LT series
The Laydown Triangle Threading, and the Top Notch, are metalworking tools that are manufactured by Kennametal. The LT threading is capable of making subtle-pitch threads which makes it ideal to be used in flexible-shim applications. The Top Notch threading is ideal to be used in both coarse-pitch and heavy-duty applications.
Grooving tool - min. ø 0.2 mm | Supermini® 105/110
This tool system is utilized for machining smaller bores. Over 1,200 standard inserts...
Grooving tool - min. ø 0.2 mm | Supermini® 105/110
This tool system is utilized for machining smaller bores. Over 1,200 standard inserts are able to be clamped in a toolholder. It is able to provide profiling, backboring, chamfering and threading. It achieves grooving from a bore diameter of 2mm, axial grooving from a diameter of 5mm and boring out from a bore diameter of 0.2mm.
Grooving tool - min. ø 8 mm | Mini Typ 108 -18P
The Mini Type 106/107/108 -18P is a tool system with an 8-mm grooving from bore diameter and...
Grooving tool - min. ø 8 mm | Mini Typ 108 -18P
The Mini Type 106/107/108 -18P is a tool system with an 8-mm grooving from bore diameter and a 7.8-mm boring out from bore diameter.
It provides variety of selections on insertion methods such as full radius, thread, backboring, and chamfer processes. This tool is usually fastened on the surface side which yields reduced vibrations for carbide tool holders.
It provides variety of selections on insertion methods such as full radius, thread, backboring, and chamfer processes. This tool is usually fastened on the surface side which yields reduced vibrations for carbide tool holders.
Grooving tool - min. ø 16 mm | 209 series
These grooving tools can work in many ways such as boring, grooving, axial grooving, chamfering, profiling, backboring and threading. They are fitted with a clamping holder with a shank diameter of...
Grooving tool - min. ø 16 mm | 209 series
These grooving tools can work in many ways such as boring, grooving, axial grooving, chamfering, profiling, backboring and threading. They are fitted with a clamping holder with a shank diameter of 16mm and can be used for internal grooving in bores with a diameter even greater than 16mm. They feature a grooving depth of up to 300mm deep with tmax of 3.5mm and a 5mm for bores with a diameter of 18mm or more.
They can be machined with a shank diameter of 20mm at an entry depth of up to 30mm. The clamping holders in a left- or right-hand design are available for the shank in g6 quality. They also feature a stable shank with an elliptical-shaped cross section along the l2 dimension which ensures and provides excellent anti-vibration characteristics for superior quality.
They can be machined with a shank diameter of 20mm at an entry depth of up to 30mm. The clamping holders in a left- or right-hand design are available for the shank in g6 quality. They also feature a stable shank with an elliptical-shaped cross section along the l2 dimension which ensures and provides excellent anti-vibration characteristics for superior quality.
Grooving tool - min. ø 18 mm | 217 series
It is a tool system that can be helpful for grooving at the time of both external and...
Grooving tool - min. ø 18 mm | 217 series
It is a tool system that can be helpful for grooving at the time of both external and internal machining. It can handle internal machining in bore diameter that is above 18 mm and can provide a groove depth to about 4.7 mm and width that ranges between 0.5 -5.3 mm. It can do external machining with maximum groove depth of 4 mm.
Grooving tool - ø 1.5 - 3 mm | 264 series
This tool system of Horn is made for grooving, boring out, vertical turning, departing and...
Grooving tool - ø 1.5 - 3 mm | 264 series
This tool system of Horn is made for grooving, boring out, vertical turning, departing and threading. When it comes to its outer machining, it offers a measurement of 1.5 mm up to 3 mm for the groove width along with a groove depth which can run up to 16 mm.
Meanwhile, this also features dimensions, areas and sizes for steel and brass machining.
Meanwhile, this also features dimensions, areas and sizes for steel and brass machining.