+7 (812) 645-08-06
Panel saws
select brand
Rip saw / multi-blade / automatic - 6 - 60 mm | FSL 310
With the multi rip saw type FSL310 you make the right choice. The one-rowed, flexible multi rip saw satisfies by its profitableness.
Your advantages...
Your advantages...
Rip saw / multi-blade / automatic - 6 - 60 mm | FSL 310
With the multi rip saw type FSL310 you make the right choice. The one-rowed, flexible multi rip saw satisfies by its profitableness.
Your advantages
each saw unti is separately adjustable
The centered extraction channel in the machine brings the suction power directly to the saw units
The sound booth covers the whole machine with an attractive design
secured plank transport by high accurate grinded transport rollers, as an option there are also steel rollers available.
low immissions caused by very stable design of suction hoods to minimize sound immissions
Your advantages
each saw unti is separately adjustable
The centered extraction channel in the machine brings the suction power directly to the saw units
The sound booth covers the whole machine with an attractive design
secured plank transport by high accurate grinded transport rollers, as an option there are also steel rollers available.
low immissions caused by very stable design of suction hoods to minimize sound immissions
Multi-blade saw / rip / automatic - 6 - 40 mm | FSL 324
FSL 324 - the new development for through feed sawing with material savings, for a resource-friendly way to produce laminate...
Multi-blade saw / rip / automatic - 6 - 40 mm | FSL 324
FSL 324 - the new development for through feed sawing with material savings, for a resource-friendly way to produce laminate flooring.
Your advantages
by displaced sawing top/bottom material savings up to 6%
flexible automatic adjustment of sawing dimensions
in combination with optical alignment of sawing dimensions
high capacity: up to 12,5 boards per minute
mature technology: transport system out of the FSL-building set
Your advantages
by displaced sawing top/bottom material savings up to 6%
flexible automatic adjustment of sawing dimensions
in combination with optical alignment of sawing dimensions
high capacity: up to 12,5 boards per minute
mature technology: transport system out of the FSL-building set
Rip saw / multi-blade / automatic - 6 - 25 mm | FSL 420
Splitting with polygon shaft technics
FSL 420 - economic and flexible dividing for different sizes by polygon-shaft...
Rip saw / multi-blade / automatic - 6 - 25 mm | FSL 420
Splitting with polygon shaft technics
FSL 420 - economic and flexible dividing for different sizes by polygon-shaft driven saws
Your advantages
short change over
flexible automatic width-adjustment 98-600mm
in combination with optical aligning automatic adjustment according to the decor
high output: up to 12,5 boards per minute
mature technology: transport system out of the FSL-building set
FSL 420 - economic and flexible dividing for different sizes by polygon-shaft driven saws
Your advantages
short change over
flexible automatic width-adjustment 98-600mm
in combination with optical aligning automatic adjustment according to the decor
high output: up to 12,5 boards per minute
mature technology: transport system out of the FSL-building set
Multi-blade saw / automatic - 6 - 40 mm | FSL 320
With the multi rip saw type FSL 320 you make the right choice. The two rowed throughfeed saw satisfies with its flexibility.
Your advantages
...
Your advantages
...
Multi-blade saw / automatic - 6 - 40 mm | FSL 320
With the multi rip saw type FSL 320 you make the right choice. The two rowed throughfeed saw satisfies with its flexibility.
Your advantages
applicable with saw units in two rows and each unit separately adjustable
The centered extraction channel in the machine brings the suction power directly to the saw units
The sound booth covers the whole machine with an attractive design
secured plank transport by high accurate grinded transport rollers, as an option there are also steel rollers available
low immissions caused by very stable design of suction hoods to minimize sound immissions
Your advantages
applicable with saw units in two rows and each unit separately adjustable
The centered extraction channel in the machine brings the suction power directly to the saw units
The sound booth covers the whole machine with an attractive design
secured plank transport by high accurate grinded transport rollers, as an option there are also steel rollers available
low immissions caused by very stable design of suction hoods to minimize sound immissions
Multi-blade saw / automatic - 6 - 40 mm | FSL 360
Multi rip saw FSL 360 - new ways to more profitability
With the multi rip saw FSL360 you make the right choice. The robust multi rip saw for...
Multi-blade saw / automatic - 6 - 40 mm | FSL 360
Multi rip saw FSL 360 - new ways to more profitability
With the multi rip saw FSL360 you make the right choice. The robust multi rip saw for highest strain
Ihre Vorteile
The central extraction of the machine brings the capacity without detours to the saw blades
arbor bearing integrated in the arbor, so no bearing damage possible when tool change
The sound enclosure covers the complete machine with an attractive design
Assured panel transport by means of high accurate grinded rollers, as an option there are also steel rollers available.
With the multi rip saw FSL360 you make the right choice. The robust multi rip saw for highest strain
Ihre Vorteile
The central extraction of the machine brings the capacity without detours to the saw blades
arbor bearing integrated in the arbor, so no bearing damage possible when tool change
The sound enclosure covers the complete machine with an attractive design
Assured panel transport by means of high accurate grinded rollers, as an option there are also steel rollers available.
Saw with panels / horizontal / CNC - Performance.CUT
For efficient cutting of small batches, IMA has adapted the powerful and proven technology of the BIMA Cutting Centre for use in a new, more compact machine. The Performance.CUT offers optimal processing...
Saw with panels / horizontal / CNC - Performance.CUT
For efficient cutting of small batches, IMA has adapted the powerful and proven technology of the BIMA Cutting Centre for use in a new, more compact machine. The Performance.CUT offers optimal processing of pre-cut parts in the smallest space and is therefore a very attractive proposition with regard to acquisition costs.
Optimised space requirements with maximum performance
Flexible cutting even with small quantities – effective and efficient
Automatic tool change during operation
Exceptional potential for savings as no sacrificial boards are required
Nested cutting plans possible
approx. 800 up to over 1500 parts/shift depending on the cutting plan
excellent quality of parts because they are permanently held by the work-holding devices until completely separated.
Optimised space requirements with maximum performance
Flexible cutting even with small quantities – effective and efficient
Automatic tool change during operation
Exceptional potential for savings as no sacrificial boards are required
Nested cutting plans possible
approx. 800 up to over 1500 parts/shift depending on the cutting plan
excellent quality of parts because they are permanently held by the work-holding devices until completely separated.
Saw with panels / horizontal / CNC - BIMA CUT series
BIMA-CUT - Combination of machining centre and panel saw - for order-batch production of fronts and components to increase productivity for processing of furniture and construction elements.
The compact production cell: Not only is the BIMA...
The compact production cell: Not only is the BIMA...
Saw with panels / horizontal / CNC - BIMA CUT series
BIMA-CUT - Combination of machining centre and panel saw - for order-batch production of fronts and components to increase productivity for processing of furniture and construction elements.
The compact production cell: Not only is the BIMA CUT system used for the production of case single parts, but the whole cut including necessary drilling and milling operation is feasible at one machine.
This is how BIMA CUT differs from nesting machines and panel saws. 5 sides of the work piece are accessible at the same time, because it is set on vacuum suction cups during machining. Even the bottom of a work piece can be machined at the outer edges with the adapter units, edge banding integrated. The work pieces come out of the machine pre-finished. When the BIMA CUT is concatenated to an automatic edge banding machine, the operator can feed the edge banding machine and incorporate the supply for the BIMA CUT. This is how a real one man machining cell is achieved.
The compact production cell: Not only is the BIMA CUT system used for the production of case single parts, but the whole cut including necessary drilling and milling operation is feasible at one machine.
This is how BIMA CUT differs from nesting machines and panel saws. 5 sides of the work piece are accessible at the same time, because it is set on vacuum suction cups during machining. Even the bottom of a work piece can be machined at the outer edges with the adapter units, edge banding integrated. The work pieces come out of the machine pre-finished. When the BIMA CUT is concatenated to an automatic edge banding machine, the operator can feed the edge banding machine and incorporate the supply for the BIMA CUT. This is how a real one man machining cell is achieved.
Saw with panels / horizontal - 350 mm | SINCAR-T
The cross-cutting SINCAR-T is the ideal solution for flexible cut of bars with very high productivity.
La SINCAR-T...
La SINCAR-T...
Saw with panels / horizontal - 350 mm | SINCAR-T
The cross-cutting SINCAR-T is the ideal solution for flexible cut of bars with very high productivity.
La SINCAR-T allows to process to coupled bars with max width 600 mm. or two coupled and overlapped bars with straight edges and max thickness 20 + 20 mm.
APPLICABLE SECTORS
Starting from chipboard or MDF panels with straight, post-formed and softformed edges, we obtain semi-finished according to the cut patterns and minimising the off-cuts.
La SINCAR-T allows to process to coupled bars with max width 600 mm. or two coupled and overlapped bars with straight edges and max thickness 20 + 20 mm.
APPLICABLE SECTORS
Starting from chipboard or MDF panels with straight, post-formed and softformed edges, we obtain semi-finished according to the cut patterns and minimising the off-cuts.
Saw with panels / horizontal - 300 mm | SLMS
This saw-cutting machine is best positioned in plants with high productivity,...
Saw with panels / horizontal - 300 mm | SLMS
This saw-cutting machine is best positioned in plants with high productivity, to produce bars in continuous with following longitudinal square edgebanding.
APPLICABLE SECTORS
Starting from big chipboard or MDF panels, we obtain bars with different width and off-cuts reduction.
APPLICABLE SECTORS
Starting from big chipboard or MDF panels, we obtain bars with different width and off-cuts reduction.
Saw with panels / horizontal - 400 mm | SL
The saw-cutting machine SL is used for the cut of the pack of big panels...
Saw with panels / horizontal - 400 mm | SL
The saw-cutting machine SL is used for the cut of the pack of big panels in order to obtain bars with the possibility to cut in both directions.
APPLICABLE SECTORS
Starting from panels in fibre, MDF, HDF, chipboard and multi-level, we obtain bars with different width.
APPLICABLE SECTORS
Starting from panels in fibre, MDF, HDF, chipboard and multi-level, we obtain bars with different width.
Saw with panels / horizontal - 400 mm | ST
The cross-cutting machine ST can carry out flexible
cuts with single panel or pack The electric running of the
...
cuts with single panel or pack The electric running of the
...
Saw with panels / horizontal - 400 mm | ST
The cross-cutting machine ST can carry out flexible
cuts with single panel or pack The electric running of the
blade unit and clamp uit, allow to cut in one direction
or both direction, according to the quality to be otained.
APPLICABLE SECTORS :
The cross-cutting machine ST can be placed in lines
for the production of semi-finished products,
starting from chipboard panels or laminated MDF
with straight, soft-formed or post-formed edges.
cuts with single panel or pack The electric running of the
blade unit and clamp uit, allow to cut in one direction
or both direction, according to the quality to be otained.
APPLICABLE SECTORS :
The cross-cutting machine ST can be placed in lines
for the production of semi-finished products,
starting from chipboard panels or laminated MDF
with straight, soft-formed or post-formed edges.