+7 (812) 645-08-06
Other cutting machines
select brand
Hose cutting machine - ø 11 - 41 mm, 3 913 x 1 050 x 1 362 mm | TUBOCUT5
The TUBOCUT5 from o+p is ideally used for the mass production of hoses. It can cut hoses with 1.4 in. spirals and...
Hose cutting machine - ø 11 - 41 mm, 3 913 x 1 050 x 1 362 mm | TUBOCUT5
The TUBOCUT5 from o+p is ideally used for the mass production of hoses. It can cut hoses with 1.4 in. spirals and 10 - 41 millimeter outside diameter. It employs a hose winding and motorized driving system, a conveyor belt, and an ANSA control device. The PLC and the touch screen on the machine make operations easier. Also, it allows a variety of hose diameters without requiring tool changes. Moreover, the blades are secured to keep the user safe.
Hose cutting machine - 5505 x 1650 x 1260 mm
The Semiautomatic Cutting Line from OP was made for operations that deal with cutting and rewinding hoses directly....
Hose cutting machine - 5505 x 1650 x 1260 mm
The Semiautomatic Cutting Line from OP was made for operations that deal with cutting and rewinding hoses directly. It can deal with 1 spiral and wind them straight into a 5-meter coil, and with a semiautomatic system, the cutting-rewinding process can accurately be monitored. Also, it has a modular floor and a meter counter integrated center device. The hose locker is adjustable, and the reel roller has a mechanical brake.
Cut-to-length cutting line - max. 3 000 x 25 mm
The cutting line device is used for cutting flat rectangular coils. It is ideal for widths of up to 3000 mm, thicknesses of up to 25 mm and rates of up to 150 m/min. The lines...
Cut-to-length cutting line - max. 3 000 x 25 mm
The cutting line device is used for cutting flat rectangular coils. It is ideal for widths of up to 3000 mm, thicknesses of up to 25 mm and rates of up to 150 m/min. The lines could be supplied with start-stop shears, flying shears, turning shears or constant immediate feed. It is equipped with air pad, shell entryway sort, electromagnetic or vacuum stackers.
It offers high-exactness levellers of four, five and six heights and controlled by computer. The edge trimming may be joined. This is completely machine controlled that is automatic coil feed and quality control. It is ideal for carbon steel, exposed material, stainless steel, prepainted steel, aluminum and different metals.
It offers high-exactness levellers of four, five and six heights and controlled by computer. The edge trimming may be joined. This is completely machine controlled that is automatic coil feed and quality control. It is ideal for carbon steel, exposed material, stainless steel, prepainted steel, aluminum and different metals.
Slitting line - max. 3 000 x 25 mm
The high-end slitting lines from Fagor is perfect for cutting narrow coils from mail coils. This is very convenient because this can be used for widths of...
Slitting line - max. 3 000 x 25 mm
The high-end slitting lines from Fagor is perfect for cutting narrow coils from mail coils. This is very convenient because this can be used for widths of up to 3000mm, thickness of up to 25mm and speed up to 44m/min. What made this extraordinary is this is computer-controlled with diagnosis and has automatic coil feed and quality control. This can also be used on different materials like carbon steel, stainless steel, pre-painted steel and aluminum among others. The best thing about this is the lines are made with high-precision slitters with quick tooling change for slitter, tensioning device and recoiler.
Combined cutting line - max. 3 000 x 25 mm
The FAGOR combined cutting lines offer service flexibility and are a cost-effective solution for various cutting processes. They can be used either as cut-to-length or as slitting lines, depending...
Combined cutting line - max. 3 000 x 25 mm
The FAGOR combined cutting lines offer service flexibility and are a cost-effective solution for various cutting processes. They can be used either as cut-to-length or as slitting lines, depending on the user's requirements. They can manipulate workpieces up to 3000 mm wide, 25 mm thick, with speeds up to 150 m/min. They perform excellently on materials like carbon steel, exposed or non exposed materials, stainless steel, pre-painted steels, aluminum and similar materials. Slitting mode features quick change slitters,high-capacity recoilers and extraction from coil without banding. If requested, they can be equipped with start-stop cutting systems, flying or rotating shears or direct feed, air cushions, bomb type doors, electromagnetic or vacuum stackers.
Cut-to-length cutting line - max. 2 200 x 15 mm
Fagor multiblanking line or multi-strand cutting line is suitable for simultaneous cutting of various rectangular blanks from main coils. The line can handles maximum widths of 2200 mm, maximum thicknesses of 15 mm and maximum speeds...
Cut-to-length cutting line - max. 2 200 x 15 mm
Fagor multiblanking line or multi-strand cutting line is suitable for simultaneous cutting of various rectangular blanks from main coils. The line can handles maximum widths of 2200 mm, maximum thicknesses of 15 mm and maximum speeds of 100 m/min. It is useful for stainless steel, pre-painted steel, carbon steel, exposed/non-exposed materials, aluminium and other metals.
The lines can be equipped with flying shears, start-stop cutting systems, direct feed or rotating shears. It supports air cushion, bomb door type, and electromagnetic or vacuum stackers. It is also possible to add computer-controlled, high-accuracy levellers of four, five and six heights. It allows inclusion of edge trimming.
The line is entirely controlled by computer, including diagnosis, automatic feeding of coil, and quality control. Included are slitters with fast tooling change capabilities.
The lines can be equipped with flying shears, start-stop cutting systems, direct feed or rotating shears. It supports air cushion, bomb door type, and electromagnetic or vacuum stackers. It is also possible to add computer-controlled, high-accuracy levellers of four, five and six heights. It allows inclusion of edge trimming.
The line is entirely controlled by computer, including diagnosis, automatic feeding of coil, and quality control. Included are slitters with fast tooling change capabilities.
Cut-to-length cutting line - max. 25 mm
Fagor's trapezium lines are applicable for the materials which width is up to 3000mm along with thickness which...
Cut-to-length cutting line - max. 25 mm
Fagor's trapezium lines are applicable for the materials which width is up to 3000mm along with thickness which is up to 25mm and speeds that range up to 150m/min. It is controlled by a computer along with diagnosis, automatic coil feed and quality control.
They can be offered with swinging shears together with air cushion, bomb door type, electromagnetic or vacuum stackers and the incorporation of edge-trimming is possible.
They can be offered with swinging shears together with air cushion, bomb door type, electromagnetic or vacuum stackers and the incorporation of edge-trimming is possible.
Coping machine for structural profiles - 500 x 1 250 mm | V808
The V808 system is the class leading and most versatile plasma coping system that features 8 axes. The superior flexibility...
Coping machine for structural profiles - 500 x 1 250 mm | V808
The V808 system is the class leading and most versatile plasma coping system that features 8 axes. The superior flexibility of the robot along with the machine construction enables it to cut literally any 3D shape there is and also mark all the four sides of the material. Additionally, the unit delivers tremendous freedom to create and produce structures with the most intricate copes and connections and also a substantially higher level of production speed.
Cutting drilling machine / sheet - max. 2 050/3 050 x 12 100 x 75 | V320-2000/ V320-3000
The Voortman V320 is the combination of plate cutting and drilling as it is suited with a unit for drilling along with a ten-fold automatic tool changer.
This product...
This product...
Cutting drilling machine / sheet - max. 2 050/3 050 x 12 100 x 75 | V320-2000/ V320-3000
The Voortman V320 is the combination of plate cutting and drilling as it is suited with a unit for drilling along with a ten-fold automatic tool changer.
This product features plasma cutting in which it uses 260 amp power source standard on the plate cutting and drilling systems and an oxy-fuel cutting for cutting through thicker material. It makes use of carbide drilling in which servo drives are used in sync with ball screws for every movement that are as large as 30 kW servo drive for the drilling spindle results in extreme acceleration. The unit also makes use of an automatic tool changer in which it offers the merging of the unmatched automation level of the Voortman lines.
This product features plasma cutting in which it uses 260 amp power source standard on the plate cutting and drilling systems and an oxy-fuel cutting for cutting through thicker material. It makes use of carbide drilling in which servo drives are used in sync with ball screws for every movement that are as large as 30 kW servo drive for the drilling spindle results in extreme acceleration. The unit also makes use of an automatic tool changer in which it offers the merging of the unmatched automation level of the Voortman lines.
Cutting drilling machine / sheet - max. 3 050 x 12 100 x 150 mm | V330-3000
The VOORTMAN V330 is a machining tool, which is intended for drilling and cutting of plate applications. It is equipped and built with...
Cutting drilling machine / sheet - max. 3 050 x 12 100 x 150 mm | V330-3000
The VOORTMAN V330 is a machining tool, which is intended for drilling and cutting of plate applications. It is equipped and built with a separate platform for its slicing and puncturing. Each of these tables is supplied and featured with a stand-alone operational gantry which handles multi-tasking processes. These independent gantries come with electromagnets. These electromagnets are purposed to deliver and transfer the plate from the drilling board to the cutting table after fulfilling the whole boring process and operations.
Plate cutting machine / CNC - 1 500 - 4 200 mm / 3 000 - 8 200 mm | V304/V308
The V304 by Voortman is particularly made for plate cutting purposes in a quick and efficient manner. The machine can process many types...
Plate cutting machine / CNC - 1 500 - 4 200 mm / 3 000 - 8 200 mm | V304/V308
The V304 by Voortman is particularly made for plate cutting purposes in a quick and efficient manner. The machine can process many types of material which include stainless steel, aluminium, and mild steel and can be combined with various cutting sources to enable all kind of cutting processes. For instance, strip cutting, weld preparations, and 3D plasma bevel cutting. Precise gantry movement is assured by the extremely accurate X-rail system and a broad range of available table types contributes to the versatility of the machine too.