+7 (812) 645-08-06
Stapling machines
select brand
Pneumatic stapling machine - BC-5
The Omec BC-5 nailing bench has been designed for assembling boxes using
staples, pins or little nails. The bench can be equipped with riveting machines that
are fitted onto an adjustable aluminium square section. On crates designed...
staples, pins or little nails. The bench can be equipped with riveting machines that
are fitted onto an adjustable aluminium square section. On crates designed...
Pneumatic stapling machine - BC-5
The Omec BC-5 nailing bench has been designed for assembling boxes using
staples, pins or little nails. The bench can be equipped with riveting machines that
are fitted onto an adjustable aluminium square section. On crates designed with
bottom only, operators perform the nailing procedure on the two sides of the
crate, then they can turn the workpiece and perform the nailing on the other two
sides. On crates designed with bottom and cover, operators shall repeat the above
operations for the nailing of the cover too. Workpieces are fed manually. Their
locking and nailing are controlled by a sensor detecting the presence of workpieces.
The crates height is adjusted by means of a specially designed handwheel that is
equipped with a position indicator. All adjustments are made very easily and
quickly. Controls are located on a PLC-equipped control panel that is built in the
machine base.
staples, pins or little nails. The bench can be equipped with riveting machines that
are fitted onto an adjustable aluminium square section. On crates designed with
bottom only, operators perform the nailing procedure on the two sides of the
crate, then they can turn the workpiece and perform the nailing on the other two
sides. On crates designed with bottom and cover, operators shall repeat the above
operations for the nailing of the cover too. Workpieces are fed manually. Their
locking and nailing are controlled by a sensor detecting the presence of workpieces.
The crates height is adjusted by means of a specially designed handwheel that is
equipped with a position indicator. All adjustments are made very easily and
quickly. Controls are located on a PLC-equipped control panel that is built in the
machine base.
Pipe stapling machine - 1 300 mm | LS 13 P
Gearbox driven pinching system
Easy operation by pneumatic pressing piston
...
Easy operation by pneumatic pressing piston
...
Pipe stapling machine - 1 300 mm | LS 13 P
Gearbox driven pinching system
Easy operation by pneumatic pressing piston
Pinching and rotation is controlled by a standard foot pedal
Pneumatic system is protected by the help of air filter
Hardened seaming rolls
Sliding system with ball bearing
Built according to EC Safety Directives and has CE
Users manual
Easy operation by pneumatic pressing piston
Pinching and rotation is controlled by a standard foot pedal
Pneumatic system is protected by the help of air filter
Hardened seaming rolls
Sliding system with ball bearing
Built according to EC Safety Directives and has CE
Users manual
Profile seaming machine - 4 m/min | FK1
The double standing seam machine FK1 is used to fold double standing seams between 20mm and 40 mm, suitable...
Profile seaming machine - 4 m/min | FK1
The double standing seam machine FK1 is used to fold double standing seams between 20mm and 40 mm, suitable for profiled shapes turned-up at 90 degrees. For turned-up metal sheets, 2 seaming operations are necessary. The seam profile height is infinitely variable from 20 40mm, depending on the profile turn-up height. For pre-profiled shapes with a profile height of 25mm only one operation is necessary.
Profile seaming machine - 9 m/min | PICCOLO
The universal folding machine PICCOLO is used to produce angular and double standing seams...
Profile seaming machine - 9 m/min | PICCOLO
The universal folding machine PICCOLO is used to produce angular and double standing seams in a single operation, for straight or arched profile shapes from a radius of 600mm. On Condition that the pre-profiled shapes are produced on a profiling machine of Schlebach. The machine is used for seam profile heights of 25 /32 / 38mm, other heights on request.
Profile seaming machine - 14 m/min | SPIDER
The new generation seaming machine SPIDER in compact and light design for manufacturing of angled and double...
Profile seaming machine - 14 m/min | SPIDER
The new generation seaming machine SPIDER in compact and light design for manufacturing of angled and double standing seams in a single operation. The machine can be used for straight as well as for arched profiled shapes form a radius of 600mm. On condition that the pre-profiled shapes are produced on a profiling machine of Schlebach. The machine is used for seam profile heights of 25 / 32 / 38mm, other heights on request.
Profile seaming machine - 11 m/min | FLITZER
The universal seaming machine Flitzer is used to produce angular and double...
Profile seaming machine - 11 m/min | FLITZER
The universal seaming machine Flitzer is used to produce angular and double standing seams in a single operation, for straight profile shapes. On condition that the pre-profiled shapes are produced on a profiling machine of Schlebach. The machine is used for seam profile height of 25mm.