+7 (812) 645-08-06
Other thermal equipment
select brand
Fluidized bed cooler
The multi-stage fluid bed coolers are tailored to operate in unison with a dust collector and a system fan to attract atmospheric air as pressure decreases. It was improved to provide simple yet important solutions for...
Fluidized bed cooler
The multi-stage fluid bed coolers are tailored to operate in unison with a dust collector and a system fan to attract atmospheric air as pressure decreases. It was improved to provide simple yet important solutions for the temperature regulation and maintenance of the cleanliness of granular feeds.
At first, the feed goes into an airlock and is distributed on perforated plate tray which has especially designed holes and is individually vibrated by an electric activator. Second, upward flowing air passes through these openings and produces a moistened bed of particles while separating the minute particles away toward the dust collector. The wet bed then determines the particles residence time prior to being transferred to the next level plate. Finally, each particle goes into a collection hopper in which they exit the system through a valve.
At first, the feed goes into an airlock and is distributed on perforated plate tray which has especially designed holes and is individually vibrated by an electric activator. Second, upward flowing air passes through these openings and produces a moistened bed of particles while separating the minute particles away toward the dust collector. The wet bed then determines the particles residence time prior to being transferred to the next level plate. Finally, each particle goes into a collection hopper in which they exit the system through a valve.
Fluidized bed high-temperature
Metso’s fuel beds produce up to 120 tpd and are perfect for small production or small sized stone. It can be fired using gas or coal. Metso’s system comes with...
Fluidized bed high-temperature
Metso’s fuel beds produce up to 120 tpd and are perfect for small production or small sized stone. It can be fired using gas or coal. Metso’s system comes with a feed and product material handling and storage system, a feed preheater, a fluid bed calciner, waste heat recovery, a fluid bed product cooler and a dust collection system. This system is built with a single controller for easy maneuvering. Since it is built with a fluid bed calciner, there will be less moving parts coming in contact with the product. The fuel bed will then able to calcine much finer material that other calciners tried and tested in the industry over 60 years.
Calciner preheater
The preheaters from METSO is available in either rectangular or polygonal shapes. Composed of a floor, roof,...
Calciner preheater
The preheaters from METSO is available in either rectangular or polygonal shapes. Composed of a floor, roof, and rams, it admits the limestone at the top and flows down and piles up. Hydraulic cylinders push the rams in order to slide the pile down to the kiln. The unit is made to extract the heat from the exhaust while simultaneously heating the stone. The rams work at preset intervals to provide exact feed to the kiln.
Water heater with water-steam heat exchanger - 15000 kcal/h | IVL
The Model IVL from ATTSU is engineered with carbon or stainless steel materials that are ideal for industrial use. It is capable of powering up to 15,000 kcal/h within its compact design delivering...
Water heater with water-steam heat exchanger - 15000 kcal/h | IVL
The Model IVL from ATTSU is engineered with carbon or stainless steel materials that are ideal for industrial use. It is capable of powering up to 15,000 kcal/h within its compact design delivering optimal efficiency with its high heat transferring quality and faster fluid flow. This unit can be complimented with a wide variety of accessories that can be applied in a range of applications made to suit the needs of the user. These accessories provide improved performance such as the extra tubular exchange, coil, valves, pump and controls, communications port for remote logging, and analog output. It is easy to maintain and operate with two circuits that can be easily cleaned. This unit is in compliance with the Directive 97/23/EC standards.
Vortex tube - 25 - 101 kCal/h | 106BSP series
The 106BSP series which is manufactured by VORTEC is a vortex tube that has...
Vortex tube - 25 - 101 kCal/h | 106BSP series
The 106BSP series which is manufactured by VORTEC is a vortex tube that has been developed to provide efficient, and reliable quality performance. Its compact design has a cooling capacity ranging from 25 kCal/hr and up to 101 kCal/hr while consuming SLPM ranging from 57 and up to 226 at 6.9 bar.
Vortex tube - 161 - 378 kCal/h | 208BSP series
This device from VORTEC is available in 3 models that operate at 6.9 bars...
Vortex tube - 161 - 378 kCal/h | 208BSP series
This device from VORTEC is available in 3 models that operate at 6.9 bars of pressure.
The 208BSP-11-H takes in 311 SLPM and can cool 161 kCal/hr, while the 208BSP-15-H takes in 425 SLPM and can cool 227 kCal/hr. Lastly, the 208BSP-25-H takes in 708 SLPM and can cool 378 kCal/hr.
The 208BSP-11-H takes in 311 SLPM and can cool 161 kCal/hr, while the 208BSP-15-H takes in 425 SLPM and can cool 227 kCal/hr. Lastly, the 208BSP-25-H takes in 708 SLPM and can cool 378 kCal/hr.
Vortex tube - 160 - 378 kCal/h | 208SSBSP series
208BSP Vortex tubes are made out of aluminum or stainless steel, are robust...
Vortex tube - 160 - 378 kCal/h | 208SSBSP series
208BSP Vortex tubes are made out of aluminum or stainless steel, are robust...
Vortex tube - 668 kCal/h | 308BSP
The Vortec Vortex Tubes offer numerous series of tubes that are either multiple...
Vortex tube - 668 kCal/h | 308BSP
The Vortec Vortex Tubes offer numerous series of tubes that are either multiple model or singular models. The 308BSP-35-H singular model is capable of providing a cooling capability of 668 kilo-calories per hour (kCal/hr). It also consumes an approximate of 991 standard liter per minute (SLPM) at a 6.9-bar pressure.
Vortex tube - 756 - 1 512 kCal/h | 328BSP series
The 328BSP series which is manufactured by VORTEC is a vortex tube that...
Vortex tube - 756 - 1 512 kCal/h | 328BSP series
The 328BSP series which is manufactured by VORTEC is a vortex tube that has been developed to provide efficient, and reliable quality performance. Its compact design has a cooling capacity ranging from 756 kCal/hr and up to 1512 kCal/hr while consuming 1415 and up to 2830 SLMP at 6.9 bar.