+7 (812) 645-08-06
Other fluid-fluid heat exchangers
select brand
Immersion heat exchanger / water-cooled / for marine applications
Bowman presents marine heat exchangers. There are three techniques used for water-cooled marine petrol and diesel engines, which include direct cooling, heat exchanger cooling and keel cooling.
When cylinders and heads employ...
When cylinders and heads employ...
Immersion heat exchanger / water-cooled / for marine applications
Bowman presents marine heat exchangers. There are three techniques used for water-cooled marine petrol and diesel engines, which include direct cooling, heat exchanger cooling and keel cooling.
When cylinders and heads employ the direct cooling method with sea water, it produces mediocre results. This is because the engine, which in all likelihood supports radiator cooling as per its original design, will run cold. This will result in destruction of the cylinder block and heads by the sea water.
For small-sized boats running in shallow or weedy water, keel cooling is ideal. However, it faces a serious limitation due to its requirement of pipework outside the hull.
The most widely used method is heat exchanger cooling. The sea water is segregated in corrosion-resistant parts. It is possible to thermostatically control the closed fresh-water circuit to ensure engine operation at optimal temperature.
When cylinders and heads employ the direct cooling method with sea water, it produces mediocre results. This is because the engine, which in all likelihood supports radiator cooling as per its original design, will run cold. This will result in destruction of the cylinder block and heads by the sea water.
For small-sized boats running in shallow or weedy water, keel cooling is ideal. However, it faces a serious limitation due to its requirement of pipework outside the hull.
The most widely used method is heat exchanger cooling. The sea water is segregated in corrosion-resistant parts. It is possible to thermostatically control the closed fresh-water circuit to ensure engine operation at optimal temperature.
Header tank heat exchanger / marine
The header tank heat exchangers from BOWMAN were first used in marine systems, but are now also used in a number of land based operations like development...
Header tank heat exchanger / marine
The header tank heat exchangers from BOWMAN were first used in marine systems, but are now also used in a number of land based operations like development work and engine testing. It uses a silent zone header tank that comes with a de-aeration feature and a filter cap, and an O-ring held detachable tube stack. This may expand or contract inside the housing. Also, it may easily be removed for cleaning purposes. With that, these Bowman Header Tank Heat Exchangers employ high-grade materials and technical features. Various end cover materials are available depending on which medium the heat exchangers are using.
Stainless steel heat exchanger / for swimming pools - 1 050 KW
The Swimming Pool Heat Exchangers from Bowman are engineered with boiler or solar panels that provide heat to pools using a simple system. They are designed with solvent weld end connections, conforming to...
Stainless steel heat exchanger / for swimming pools - 1 050 KW
The Swimming Pool Heat Exchangers from Bowman are engineered with boiler or solar panels that provide heat to pools using a simple system. They are designed with solvent weld end connections, conforming to British and European sizes. It also features a thermostat that comes as a standard per unit.
These heat exchangers come in three different models. The Cupro-Nickel tubes and titanium tubes are ideal for spa pools & swimming pools. The stainless steel tubes are best used for the aquatic market. All variants are made of material that is resitant to corrosion.
They can be used for a wide variety of applications, including heat pumps, boilers and solar panels. These exchangers can be easily installed either horizontally or vertically, or made customizable to suit the needs of the user.
These heat exchangers come in three different models. The Cupro-Nickel tubes and titanium tubes are ideal for spa pools & swimming pools. The stainless steel tubes are best used for the aquatic market. All variants are made of material that is resitant to corrosion.
They can be used for a wide variety of applications, including heat pumps, boilers and solar panels. These exchangers can be easily installed either horizontally or vertically, or made customizable to suit the needs of the user.
Fuel cooler
This fuel cooler by Bowman is purposefully built for cooling fuel on various marine engines. It consists of cupro-nickel tubes that ensures prolonged lifespan. These tubes have enhanced resistance to corrosion and have the smallest sizes with the efficient ability to take the full sea water flow of the engine.
Multi-tube heat exchanger - 18 - 117 kW | Bayonet-Ultra
The Bayonet-Ultra recuperators are manufactured by Eclipse to provide highly efficient combustion in a multi-tube design. These heat exchangers are specifically...
Multi-tube heat exchanger - 18 - 117 kW | Bayonet-Ultra
The Bayonet-Ultra recuperators are manufactured by Eclipse to provide highly efficient combustion in a multi-tube design. These heat exchangers are specifically...
Tubular heat exchanger / air/air - CFR series
The Cross Flow Recuperator, assembled by Eclipse, is a heat exchanger that features a compact tubular air to air structure for the usage of recovering...
Tubular heat exchanger / air/air - CFR series
The Cross Flow Recuperator, assembled by Eclipse, is a heat exchanger that features a compact tubular air to air structure for the usage of recovering waste heat in industrial exhaust gases. This machine is partnered with an eclipse eductor to guarantee that all the eliminated heat will be drawn towards the recuperator. Moreover, the recovered heat is used for the preheating of the combustion air to enhance the thermal effectiveness.
The tool has a single ended outline that permits for the expansion of the recuperator tubes and the less requirement for expansion joints.
The tool has a single ended outline that permits for the expansion of the recuperator tubes and the less requirement for expansion joints.
Tubular heat exchanger / air/air - 117 - 470 kW | M series
The Extern-A-Therm series of heat exchangers or recuperators from ECLIPSE THERMAL SOLUTIONS are made to restore the scrap...
Tubular heat exchanger / air/air - 117 - 470 kW | M series
The Extern-A-Therm series of heat exchangers or recuperators from ECLIPSE THERMAL SOLUTIONS are made to restore the scrap heat from industrial exhaust gases. Thermal efficiency is enhanced by utilizing the head restored for preheating the burner's combustion air. An ECLIPSE Eductor is ideally used to make sure that the restored heat passes through the recuperator tubes. Also, it is housed in a design that minimizes cost by providing simple installations through existing pipe works.
Multi-tube heat exchanger / tubular - max. 1 600 °F (870 °C) | TBR
The 545 which is manufactured by ECLIPSE is a tubular heat exchanger that has been developed to provide efficient, and reliable performance specifically on...
Multi-tube heat exchanger / tubular - max. 1 600 °F (870 °C) | TBR
The 545 which is manufactured by ECLIPSE is a tubular heat exchanger that has been developed to provide efficient, and reliable performance specifically on...
Gas cooler - 20 - 450 kW | AlfaBlue BXM/BXD
AlfaBlue BXM/BXD series CO2 gas coolers feature capacities ranging from 20 to 450 kW, and are a common...
Gas cooler - 20 - 450 kW | AlfaBlue BXM/BXD
AlfaBlue BXM/BXD series CO2 gas coolers feature capacities ranging from 20 to 450 kW, and are a common replacement for conventional air-cooled condensers in various refrigeration systems. Air-cooled gas coolers operate with considerably higher pressures than air-cooled condensers. They can be ordered for horizontal or vertical air direction in a single (M) or dual (D) coil execution.
Gas cooler - 42 - 370 kW | Alfa-V Single Row VXM
Co2 gas coolers replace conventional air-cooled condensers in refrigerating frameworks that have been intended for the utilization of Co2 as a solitary refrigerant. Such...
Gas cooler - 42 - 370 kW | Alfa-V Single Row VXM
Co2 gas coolers replace conventional air-cooled condensers in refrigerating frameworks that have been intended for the utilization of Co2 as a solitary refrigerant. Such establishments are getting more broadly utilized within applications such as supermarkets.
Alfa-V Single Row has been particularly intended for business refrigeration and air cooling. The V-edge, with its excellent controlling, improves airflow, while low coil safety lessens the vitality utilization of the fan motors. Its primary reason for existing is to reject little to medium high temperature loads in modest footprint. It is available in nominal limits from 42 to 370 kw.
Alfa-V Single Row has been particularly intended for business refrigeration and air cooling. The V-edge, with its excellent controlling, improves airflow, while low coil safety lessens the vitality utilization of the fan motors. Its primary reason for existing is to reject little to medium high temperature loads in modest footprint. It is available in nominal limits from 42 to 370 kw.
Spiral heat exchanger
Exclusive shape has exclusive properties. A spiral heat changer is exactly what it claims - a circular designed heat changer complete with dual concentric spiral channels, one dedicated for each fluid. The ones featuring the curved channel...
Spiral heat exchanger
Exclusive shape has exclusive properties. A spiral heat changer is exactly what it claims - a circular designed heat changer complete with dual concentric spiral channels, one dedicated for each fluid. The ones featuring the curved channel design offers superior heat transfer and flow properties for a plethora of diverse fluids, while maintaining the complete size of the unit to a minimum.
The feature list of a spiral heat changer is rather extensive but completely geared to cater to the requirements of every customer, self cleaning mechanism minimizes operational costs, reduced maintenance costs thanks to the easy access, superior heat transfer, which is higher than in tubes and shells. All units are completely drainable, condensers literally possess no vapor side pressure drop, condensers can be column mounted, which reduces costs of installation and backed by over 40 years of manufacturing experience.
The feature list of a spiral heat changer is rather extensive but completely geared to cater to the requirements of every customer, self cleaning mechanism minimizes operational costs, reduced maintenance costs thanks to the easy access, superior heat transfer, which is higher than in tubes and shells. All units are completely drainable, condensers literally possess no vapor side pressure drop, condensers can be column mounted, which reduces costs of installation and backed by over 40 years of manufacturing experience.
Scraped surface heat exchanger - - 35 °C ... + 150 °C | SSHE
There are many prepared food products that quickly foul normal heat exchangers, as they are sticky, viscous and often contain particles that alter their states when heated. But with the new generation of Contherm scraped-surface...
Scraped surface heat exchanger - - 35 °C ... + 150 °C | SSHE
There are many prepared food products that quickly foul normal heat exchangers, as they are sticky, viscous and often contain particles that alter their states when heated. But with the new generation of Contherm scraped-surface heat exchangers, manufactured by Alfa Laval, the situation changes as the models are updated with no less than four new performance enhancements, extending the capabilities of the range.
In addition to the food safety initiatives being enhanced, a more gentle treatment of the products occurs, along with improved wear and chemical corrosion resistance. The manufacturer has also made ConthermFlex available, an upgrading service, which provides customers with old scraped surface technology to be efficiently upgrade.
The larger model comes with 15% more surface area, as well as a capacity that is 25% higher than in traditional sizes.
In addition to the food safety initiatives being enhanced, a more gentle treatment of the products occurs, along with improved wear and chemical corrosion resistance. The manufacturer has also made ConthermFlex available, an upgrading service, which provides customers with old scraped surface technology to be efficiently upgrade.
The larger model comes with 15% more surface area, as well as a capacity that is 25% higher than in traditional sizes.
Tube-tube heat exchanger / for the pharmaceutical industry - max. 1800 l/h | Pharma-X
Based on an innovative tube-in-tube heat exchanger, the Pharma-X is a point of use cooler. Supplied as a complete insulated module, it has a pitot tube arrangement and either manual or automatic...
Tube-tube heat exchanger / for the pharmaceutical industry - max. 1800 l/h | Pharma-X
Based on an innovative tube-in-tube heat exchanger, the Pharma-X is a point of use cooler. Supplied as a complete insulated module, it has a pitot tube arrangement and either manual or automatic valves, making the installation process quick and easy. When the Pharma-X is installed in a water system it can be considered to be a sub-loop of the main loop.
A stringent hygienic standard is met by the Pharma-X to comply with those imposed by the control authorities and industry. All product wetted parts are electropolished and the tubes are seamless. There is no risk of cross-contamination between the service medium and the product as there are no internal welds. On the product side, the Pharma-X is fully drainable, with no dead legs.
A stringent hygienic standard is met by the Pharma-X to comply with those imposed by the control authorities and industry. All product wetted parts are electropolished and the tubes are seamless. There is no risk of cross-contamination between the service medium and the product as there are no internal welds. On the product side, the Pharma-X is fully drainable, with no dead legs.