+7 (812) 645-08-06
Dual-fuel burners, other burners
select brand
Gas burner / low-emissions / for boilers - 1 - 126.8 MW | DDZGA
Easy installation in the channel between the gas turbine and heat generator
Especially low pressure loss
Can be...
Especially low pressure loss
Can be...
Gas burner / low-emissions / for boilers - 1 - 126.8 MW | DDZGA
Easy installation in the channel between the gas turbine and heat generator
Especially low pressure loss
Can be installed as a "channel burner" upstream from a waste heat boiler
Can be installed as a "boiler burner" upstream from a boiler furnace
Multiple burners can be arranged in one installation frame
Available for numerous (special) fuels
Very low emission level
Combined operation / additional fresh air operation / fresh air operation possible
Especially low pressure loss
Can be installed as a "channel burner" upstream from a waste heat boiler
Can be installed as a "boiler burner" upstream from a boiler furnace
Multiple burners can be arranged in one installation frame
Available for numerous (special) fuels
Very low emission level
Combined operation / additional fresh air operation / fresh air operation possible
Dual-fuel burner / low-NOx / for boilers - 1 - 120 MW | SSB
If furnaces are limited in the high load range, it's time for the SSB swirl burner series. It is based on SAACKE steam pressure atomizers, to which a tangential windbox has been added. This causes the combustion air to be intensively swirled and allows for an...
Dual-fuel burner / low-NOx / for boilers - 1 - 120 MW | SSB
If furnaces are limited in the high load range, it's time for the SSB swirl burner series. It is based on SAACKE steam pressure atomizers, to which a tangential windbox has been added. This causes the combustion air to be intensively swirled and allows for an especially short and stable flame.
The swirl can be finely adjusted with a swirl slide in the burner, so that the length of the flame can be specifically adapted to local conditions. For example, with a flame length of only 3 meters and capacity of 30 MW, the air guiding produces outstanding results mixing the fuel so that temperature peaks and thermal NOx are also effectively prevented.
Gas and oil are directed into the furnace with a fuel gun. This makes firing especially flexible because the burner can be changed over to other fuels within a very short time. Great flexibility is a trademark of the SSB series: It also allows for firing using gases with low heat values or low-calorific liquids in a special design without an expensive support fuel.
The swirl can be finely adjusted with a swirl slide in the burner, so that the length of the flame can be specifically adapted to local conditions. For example, with a flame length of only 3 meters and capacity of 30 MW, the air guiding produces outstanding results mixing the fuel so that temperature peaks and thermal NOx are also effectively prevented.
Gas and oil are directed into the furnace with a fuel gun. This makes firing especially flexible because the burner can be changed over to other fuels within a very short time. Great flexibility is a trademark of the SSB series: It also allows for firing using gases with low heat values or low-calorific liquids in a special design without an expensive support fuel.
Steam burner / tube / for tube ends / for pipe - 8.5 - 37 MW | DDZ-M
Design features
The SAACKE steam pressure atomizer is designed for firing medium and large sized water tube boilers such as auxiliary and main boilers...
The SAACKE steam pressure atomizer is designed for firing medium and large sized water tube boilers such as auxiliary and main boilers...
Steam burner / tube / for tube ends / for pipe - 8.5 - 37 MW | DDZ-M
Design features
The SAACKE steam pressure atomizer is designed for firing medium and large sized water tube boilers such as auxiliary and main boilers for tankers and FPSOs.
The unique SAACKE design features staged combustion air supply and distribution. This allows a high control range and ensures complete combustion, resulting in low O2 values even when operating on low load.
At the same time, a very stable flame over the whole load range is given. On account of its highly versatile flame geometry, the DDZ-M burner is equally suitable for side fired and top fired boilers.
The SAACKE steam pressure atomizer is designed for firing medium and large sized water tube boilers such as auxiliary and main boilers for tankers and FPSOs.
The unique SAACKE design features staged combustion air supply and distribution. This allows a high control range and ensures complete combustion, resulting in low O2 values even when operating on low load.
At the same time, a very stable flame over the whole load range is given. On account of its highly versatile flame geometry, the DDZ-M burner is equally suitable for side fired and top fired boilers.
Flare stack - 2 388 400 BTU/h | 20
The ABUTEC 20 (SCUF MTF 0.7), has been approved by the Environmental Protection Agency (EPA) as having achieved specific performance requirements related to emissions. Read the full report here.
The announcement relieves owners and operators from the burden of performing third-party testing on approved combustion devices. Because the ABUTEC...
The announcement relieves owners and operators from the burden of performing third-party testing on approved combustion devices. Because the ABUTEC...
Flare stack - 2 388 400 BTU/h | 20
The ABUTEC 20 (SCUF MTF 0.7), has been approved by the Environmental Protection Agency (EPA) as having achieved specific performance requirements related to emissions. Read the full report here.
The announcement relieves owners and operators from the burden of performing third-party testing on approved combustion devices. Because the ABUTEC...
The announcement relieves owners and operators from the burden of performing third-party testing on approved combustion devices. Because the ABUTEC...
Flare stack - 9 212 400 BTU/h | 100
The ABUTEC 100 (SCUF MTF 2.7), has been approved by the Environmental Protection Agency (EPA) as having achieved specific performance requirements related to emissions. Read the full report here.
The announcement relieves owners and operators from the burden of performing third-party testing on approved combustion devices. Because the ABUTEC 20 and ABUTEC 100 have been approved,these...
The announcement relieves owners and operators from the burden of performing third-party testing on approved combustion devices. Because the ABUTEC 20 and ABUTEC 100 have been approved,these...
Flare stack - 9 212 400 BTU/h | 100
The ABUTEC 100 (SCUF MTF 2.7), has been approved by the Environmental Protection Agency (EPA) as having achieved specific performance requirements related to emissions. Read the full report here.
The announcement relieves owners and operators from the burden of performing third-party testing on approved combustion devices. Because the ABUTEC 20 and ABUTEC 100 have been approved,these...
The announcement relieves owners and operators from the burden of performing third-party testing on approved combustion devices. Because the ABUTEC 20 and ABUTEC 100 have been approved,these...
Flare stack - 18 424 800 BTU/h | 200
Key Features of the ABUTEC 200:
Local Service Team availability
Low Capital and Operating Costs
Flexible & Scalable System
99%+ Destruction Efficiency (Independent 3rd party tested)
Very High Turndown Ratio
Scalable flow rates from 100-200 MSCFD
Inlet...
Local Service Team availability
Low Capital and Operating Costs
Flexible & Scalable System
99%+ Destruction Efficiency (Independent 3rd party tested)
Very High Turndown Ratio
Scalable flow rates from 100-200 MSCFD
Inlet...
Flare stack - 18 424 800 BTU/h | 200
Key Features of the ABUTEC 200:
Local Service Team availability
Low Capital and Operating Costs
Flexible & Scalable System
99%+ Destruction Efficiency (Independent 3rd party tested)
Very High Turndown Ratio
Scalable flow rates from 100-200 MSCFD
Inlet...
Local Service Team availability
Low Capital and Operating Costs
Flexible & Scalable System
99%+ Destruction Efficiency (Independent 3rd party tested)
Very High Turndown Ratio
Scalable flow rates from 100-200 MSCFD
Inlet...
Flare stack low-emissions - 180 BTU/ft³ | HTF
Completely Enclosed Combustion
Low NOx and CO emissions
Greater than 99.99% Destruction Efficiency
High Turndown Ratio
Offering...
Low NOx and CO emissions
Greater than 99.99% Destruction Efficiency
High Turndown Ratio
Offering...
Flare stack low-emissions - 180 BTU/ft³ | HTF
Completely Enclosed Combustion
Low NOx and CO emissions
Greater than 99.99% Destruction Efficiency
High Turndown Ratio
Offering...
Low NOx and CO emissions
Greater than 99.99% Destruction Efficiency
High Turndown Ratio
Offering...
Flare stack - 9 200 000 - 68 000 000 BTU/h
Key Features of the Produced Gas Dual Tip:
Quad O compliant dual solution
Local Service Team availability
Low Capital and Operating Costs
99%+ Destruction Efficiency
Solar Panel functionality
SCADA integration with control panel for remote monitoring
Combust produced gas (high pressure and...
Quad O compliant dual solution
Local Service Team availability
Low Capital and Operating Costs
99%+ Destruction Efficiency
Solar Panel functionality
SCADA integration with control panel for remote monitoring
Combust produced gas (high pressure and...
Flare stack - 9 200 000 - 68 000 000 BTU/h
Key Features of the Produced Gas Dual Tip:
Quad O compliant dual solution
Local Service Team availability
Low Capital and Operating Costs
99%+ Destruction Efficiency
Solar Panel functionality
SCADA integration with control panel for remote monitoring
Combust produced gas (high pressure and...
Quad O compliant dual solution
Local Service Team availability
Low Capital and Operating Costs
99%+ Destruction Efficiency
Solar Panel functionality
SCADA integration with control panel for remote monitoring
Combust produced gas (high pressure and...