+7 (812) 645-08-06
Burner accessories
select brand
Gas train - 0.5 - 4 bar | HPRT series
The Linpac Plastics saves with Riello Burner, manufactured by Riello, is a fuel burner used to consume waste process fluid from the production...
Gas train - 0.5 - 4 bar | HPRT series
The Linpac Plastics saves with Riello Burner, manufactured by Riello, is a fuel burner used to consume waste process fluid from the production process. It includes inlet and outlet isolating valves, a vent stack, an optional inlet and outlet manifold, an inter-connecting pipe work (PE or Steel) and a below ground unit (Krysalis, K19, 280 vector module). It offers a different variety of compact, purpose-designed and below-ground gas pressure preventing stations. This independent unit is also perfect for gas transmission and distribution.
Gas train - max. 0.5 bar | LPRT series
These industrial combustion systems from RIELLO BURNERS employ pressure reduction and control units, in order to retrofit the pressure...
Gas train - max. 0.5 bar | LPRT series
These industrial combustion systems from RIELLO BURNERS employ pressure reduction and control units, in order to retrofit the pressure available to meet the requirements of the application. The gas trains come with a variety of safety and control devices for the burner. They are available in either separated or constructed units, which must be done on the specific operation. This allows for versatility with pre-made units. Moreover, they are subjected to tests involving the standards as well as the installation process.
Gas train - max. 0.5 bar | MBC series
The gas pressure available in a line can be brought to the values suited to the specific application by the pressure reduction and regulation groups.
A series of safety and...
A series of safety and...
Gas train - max. 0.5 bar | MBC series
The gas pressure available in a line can be brought to the values suited to the specific application by the pressure reduction and regulation groups.
A series of safety and control devices for gas feeding to the burner is included in the gas trains. These are made and supplied with two different selection options, separated or assembled units, which are used based on various considerations about the specific application, such as available pressure and installation chances.
This ensures the best flexibility is achieved in the application by using the pre-assembled units. These have also been tested in the factory with respect to the existing normatives and are projected for a simple installation procedure.
A series of safety and control devices for gas feeding to the burner is included in the gas trains. These are made and supplied with two different selection options, separated or assembled units, which are used based on various considerations about the specific application, such as available pressure and installation chances.
This ensures the best flexibility is achieved in the application by using the pre-assembled units. These have also been tested in the factory with respect to the existing normatives and are projected for a simple installation procedure.
Gas train - max. 0.5 bar | VGD series
The pressure decrease and control groups are capable of bringing gas pressure in line with the the particular application along with a security...
Gas train - max. 0.5 bar | VGD series
The pressure decrease and control groups are capable of bringing gas pressure in line with the the particular application along with a security regulation tool for gas feeding to the burner with two separate provisions. You can make your pick depending upon the different analysis of applications such as existing pressure or installation chances.
Additionally these control groups are also capable of offering highest adaptability in the application with pre-constructed units that are tested with regards to current normatives and target an easy set up.
Additionally these control groups are also capable of offering highest adaptability in the application with pre-constructed units that are tested with regards to current normatives and target an easy set up.
Burner controller - QA series
These are control panels for burners which are accessible on various versions depending on the request. It has either wall-mounted or desk type version for example. It features...
Burner controller - QA series
These are control panels for burners which are accessible on various versions depending on the request. It has either wall-mounted or desk type version for example. It features its automatic control system which organized the integration process of the whole operation. The logical reasoning of the machine is based on a certain type of operational requirements which is in compliance with the main safety procedures. Plus, its basic operation can be managed to be more complicated as it is a regulation for different parts such as combustion (oxygene trim), fan speed control (with inverter), electronic cam and others. It also follows a certain standard control panel based on EN 60439-1.
Igniter burner - 2000 V | E-SPARK-3/6 series
Ignition and burner control for ignition burner, pilots burners,...
Igniter burner - 2000 V | E-SPARK-3/6 series
Ignition and burner control for ignition burner, pilots burners, lances and spark plugs.
High energy ignition, 12 Joule
Capacitor discharge with thyristor/diode
100% Electronic, no wear
Wide range of power supply voltages.
Low power consumption
High energy ignition, 12 Joule
Capacitor discharge with thyristor/diode
100% Electronic, no wear
Wide range of power supply voltages.
Low power consumption
Helm burner / for burner - 2600 - 3000 mm
For most flare systems the pilot burner can not be accessed for service. Maintenance or replacement is not possible while the flare is in operation.
To safeguard operation,...
To safeguard operation,...
Helm burner / for burner - 2600 - 3000 mm
For most flare systems the pilot burner can not be accessed for service. Maintenance or replacement is not possible while the flare is in operation.
To safeguard operation, Smitsvonks pilots provide reliable ignition and stable burning even under the most difficult climate conditions.
Long lifetime, longer maintenance intervals
Insensitive to moisture and dirt
Complete delivery; thermocouple cables, junction boxes and flame front generator
Self-aspirating or forced air supply
Integrated and protected thermocouple
Functionally tested to client specifications
Construction completely out of high temperature-resistant stainless steel.
To safeguard operation, Smitsvonks pilots provide reliable ignition and stable burning even under the most difficult climate conditions.
Long lifetime, longer maintenance intervals
Insensitive to moisture and dirt
Complete delivery; thermocouple cables, junction boxes and flame front generator
Self-aspirating or forced air supply
Integrated and protected thermocouple
Functionally tested to client specifications
Construction completely out of high temperature-resistant stainless steel.
Shut-off valve / safety / gas / for burner - AD 2 H
Two gas safety shut-off valves are checked for their...
Shut-off valve / safety / gas / for burner - AD 2 H
Two gas safety shut-off valves are checked for their tightness prior to every
burner start-up or after every shut-down.
Valve Proving Systems for gases according to DVGW-data sheet G 260.
burner start-up or after every shut-down.
Valve Proving Systems for gases according to DVGW-data sheet G 260.
Igniter burner - D-HG 400
The D-HG 400 high energy ignition device is suitable for the ignition of gas or liquid fuels in industrial burners of any capacity.
Ignition of liquid or gaseous fuels with large power ratings - ignites...
Ignition of liquid or gaseous fuels with large power ratings - ignites...
Igniter burner - D-HG 400
The D-HG 400 high energy ignition device is suitable for the ignition of gas or liquid fuels in industrial burners of any capacity.
Ignition of liquid or gaseous fuels with large power ratings - ignites even heavy oil no. 6
Compact design: control unit and ignition lance form one unit (D-HG 400-50, -51)
Special designs for potentially explosive atmospheres are available (D-HG 400-54 Ex, -72 Ex)
Special design with battery operation (D-HG 400-80 with D-HG 400-81)
Special design for tilting burner with flexible ignition lance (D-HG 400-90)
No wear because thyristor controlled
20 ignition sparks with 4.5 J per second (i.e. 90 J total per second)
Ignition feedback signal via integrated LED or potential-free relay output
Suitable as Ignitor Class 3 Special in accordance with NFPA 85
Ignition of liquid or gaseous fuels with large power ratings - ignites even heavy oil no. 6
Compact design: control unit and ignition lance form one unit (D-HG 400-50, -51)
Special designs for potentially explosive atmospheres are available (D-HG 400-54 Ex, -72 Ex)
Special design with battery operation (D-HG 400-80 with D-HG 400-81)
Special design for tilting burner with flexible ignition lance (D-HG 400-90)
No wear because thyristor controlled
20 ignition sparks with 4.5 J per second (i.e. 90 J total per second)
Ignition feedback signal via integrated LED or potential-free relay output
Suitable as Ignitor Class 3 Special in accordance with NFPA 85
Burner ignition transformer - 5000 V | D-HG 55
The D-HG 55 electronic ignition transformer is suitable for the ignition of gases and liquid fuels in small burners.
Ignition...
Ignition...
Burner ignition transformer - 5000 V | D-HG 55
The D-HG 55 electronic ignition transformer is suitable for the ignition of gases and liquid fuels in small burners.
Ignition of oil and gas
High-performance and reliable ignition
Simple to use and installation
Robust enclosure for industrial use
Maintenance-free because no wearing parts
100 ignition sparks/second with a mains frequency of 50Hz, 120 ignition sparks/second with a mains frequency of 60Hz
Suitable as Ignitor Class 3 Special in accordance with NFPA 8501 and NFPA 8502
Ignition of oil and gas
High-performance and reliable ignition
Simple to use and installation
Robust enclosure for industrial use
Maintenance-free because no wearing parts
100 ignition sparks/second with a mains frequency of 50Hz, 120 ignition sparks/second with a mains frequency of 60Hz
Suitable as Ignitor Class 3 Special in accordance with NFPA 8501 and NFPA 8502
Control butterfly valve / for burner - DN 250 - 3 000, 16 bar | PKIII/D
Kuhme's product is recommended for a secure sealing and a fast-closing butterfly as a main shut off component in gas systems, flap valves, gas or air failure...
Control butterfly valve / for burner - DN 250 - 3 000, 16 bar | PKIII/D
Kuhme's product is recommended for a secure sealing and a fast-closing butterfly as a main shut off component in gas systems, flap valves, gas or air failure...