+7 (812) 645-08-06
Burner accessories
select brand
Gas train
The Gas Train is manufactured by Ecostar, and is specifically designed with gas control system. This device keeps the gas pressure and regulate pressure waving fixed. It has large capacity limits, and is suitable to gas control block.
Reheating pump unit / heavy fuel / for burner - 1 000 - 5 000 l/h | FPI series
This heating and pumping unit can perform a very important function when it comes to fuel oil combustion systems. The pumping unit is often disregarded, but this is a mistake. Too many combustion troubles are caused by...
Reheating pump unit / heavy fuel / for burner - 1 000 - 5 000 l/h | FPI series
This heating and pumping unit can perform a very important function when it comes to fuel oil combustion systems. The pumping unit is often disregarded, but this is a mistake. Too many combustion troubles are caused by a faulty operation of the fuel feeding unit. There are several problems that can appear, such as the fuel temperature and press variations, along with the high temperatures of the healing exchanger surface. This can often cause carbon scalings, while the fuel viscosity is coded as a number, depending on how the liquid is. As an example, the heavy oil is called No. 6 and is not liquid at room temperature conditions. The pump capacity, at the same time, is selected by the manufacturer of the burner, and there are two types of pumping stations, a high pressure and low pressure one. Note that the low pressure stations are used for sleam atomizing burners.
Fuel oil line heater - OPM
The Oil Preheater Module, manufactured by Bosch Industrial, is a supply intended for boilers that features...
Fuel oil line heater - OPM
The Oil Preheater Module, manufactured by Bosch Industrial, is a supply intended for boilers that features an extendible tube bundle which can be placed with a steam electric heater. Heating control, thermal insulation and fittings are all preassembled and ready for integration.
For its operation, the machine preheats the pumpable fuel oil towards the atomiser temperature for the necessary burner.
For its operation, the machine preheats the pumpable fuel oil towards the atomiser temperature for the necessary burner.
Burner controller - 120 - 230 V AC | FCU 500
The FCU 500 by Elster is a deterrent system regulator designed for regulating...
Burner controller - 120 - 230 V AC | FCU 500
The FCU 500 by Elster is a deterrent system regulator designed for regulating and maintaining the whole safeness of the unit in line with series of burner units which are used in most of industrial furnaces. It has a central voltage of about 230 V AC or 120 V AC.
Burner controller - 120 - 230 V | BCU 370
The BCU 370, manufactured by Elster, is a burner control unit that incorporates a flame control including...
Burner controller - 120 - 230 V | BCU 370
The BCU 370, manufactured by Elster, is a burner control unit that incorporates a flame control including UV sensor or ionization sensor, air valve control as well as pre- and post-ventilation. It is specifically used to demonstrate the program status, flame signals and unit parameters.
In addition to that, these burner control unit is suitable for frequent cycling operation.
In addition to that, these burner control unit is suitable for frequent cycling operation.
Flame detector / for burner - 110 - 240 V | IFW 50
Elster FW 50 is a flame detector used for the uninterrupted detection of flames using...
Flame detector / for burner - 110 - 240 V | IFW 50
Elster FW 50 is a flame detector used for the uninterrupted detection of flames using precise optical sensors. This multi-flame equipment ensures the highest level of protection from fires with exceptional immunity to false alarms. It features a switchable voltage from 220/240V AC to 110/120V AC for grounded or ungrounded mains.
Helm burner - 3 kW | ZAI
The Kromschröeder PILOT BURNERS ZAI are high performance thermo pilot burner designed...
Helm burner - 3 kW | ZAI
The Kromschröeder PILOT BURNERS ZAI are high performance thermo pilot burner designed...