+7 (812) 645-08-06
Boilers, steam generators
select brand
Steam boiler / fire tube / heat recovery
Waste gas heat recovery boilers downstream cogeneration and industrial plants.
This kind of boiler employs the heat of exhaust gases to produce steam.
Traditional gas heat recovery boilers do not have a furnace, as the water inside them is not heated up with a burner, but just with the heat of fumes
conveyed in them.
The fields of applications are:
- INDUSTRIAL PROCESSES
-...
This kind of boiler employs the heat of exhaust gases to produce steam.
Traditional gas heat recovery boilers do not have a furnace, as the water inside them is not heated up with a burner, but just with the heat of fumes
conveyed in them.
The fields of applications are:
- INDUSTRIAL PROCESSES
-...
Steam boiler / fire tube / heat recovery
Waste gas heat recovery boilers downstream cogeneration and industrial plants.
This kind of boiler employs the heat of exhaust gases to produce steam.
Traditional gas heat recovery boilers do not have a furnace, as the water inside them is not heated up with a burner, but just with the heat of fumes
conveyed in them.
The fields of applications are:
- INDUSTRIAL PROCESSES
- ENERGY PRODUCTION PLANT
- COGENERATION
- BIOMASS PLANT
An big innovation is the introduction of a waste heat recovery boiler able to combine the generation of steam by combustion with heat recovery from hot fumes from external sources. This free source is primary, while combustion can be used as a backup or provide the power required if the recovery fumes are not enough to meet the systems request for steam. Combustion-based operation features three flue-gas pass with passing flame and wet bottom. The boilers body is made with flanged tube plates that replace the more traditional corner welds to ensure top safety levels and reduce areas with thermal stress. The recovery section is entirely
separated from the combustion section, though it is immersed in the same boiler water. The front doors are secured to the boilers body with double jointed hinges, which are used to open and inspect the equipment with no need to remove the boiler.
ECONOMIZER
No need to mention again that such as for the traditional boiler, it is possible to increase the efficiency up to 5% with the installation of an economizer, to preheat the feed-water with the fumes.
This kind of boiler employs the heat of exhaust gases to produce steam.
Traditional gas heat recovery boilers do not have a furnace, as the water inside them is not heated up with a burner, but just with the heat of fumes
conveyed in them.
The fields of applications are:
- INDUSTRIAL PROCESSES
- ENERGY PRODUCTION PLANT
- COGENERATION
- BIOMASS PLANT
An big innovation is the introduction of a waste heat recovery boiler able to combine the generation of steam by combustion with heat recovery from hot fumes from external sources. This free source is primary, while combustion can be used as a backup or provide the power required if the recovery fumes are not enough to meet the systems request for steam. Combustion-based operation features three flue-gas pass with passing flame and wet bottom. The boilers body is made with flanged tube plates that replace the more traditional corner welds to ensure top safety levels and reduce areas with thermal stress. The recovery section is entirely
separated from the combustion section, though it is immersed in the same boiler water. The front doors are secured to the boilers body with double jointed hinges, which are used to open and inspect the equipment with no need to remove the boiler.
ECONOMIZER
No need to mention again that such as for the traditional boiler, it is possible to increase the efficiency up to 5% with the installation of an economizer, to preheat the feed-water with the fumes.
Steam boiler / fire tube / three-pass / wet back - CS
Firetube steam boiler completely manufacture in our headquarter.
Main information
- three effective smoke turns
- semi-fixed
- wet bottom
- furnace FOX model.
Technical Feature:
- Steam production...
Main information
- three effective smoke turns
- semi-fixed
- wet bottom
- furnace FOX model.
Technical Feature:
- Steam production...
Steam boiler / fire tube / three-pass / wet back - CS
Firetube steam boiler completely manufacture in our headquarter.
Main information
- three effective smoke turns
- semi-fixed
- wet bottom
- furnace FOX model.
Technical Feature:
- Steam production from 1.7Ton/h up to 25Ton/h
- Pressure up to 20bar (more on demand)
- Steam water ratio 98% (more on demand)
- Low NOx
- Efficiency up to 95,5% with economizer
- Available to use gaseous and liquid fuels
- Superheated steam on demand
- CE System for conduction without supervisor for 72 continuous hours
- Designed and manufactured in compliance with CE Directives
Complementary/Supplementary accessories
- Water treatment (softener, reverse osmosis, demineralizer, etc)
- Atmopheric and pressurized deareator
- Blow down vessel (purge)
- Feed water tank
- Fuel storage tank
- Piping pre-mounted
- Chimney (with and without CE mark)
Main information
- three effective smoke turns
- semi-fixed
- wet bottom
- furnace FOX model.
Technical Feature:
- Steam production from 1.7Ton/h up to 25Ton/h
- Pressure up to 20bar (more on demand)
- Steam water ratio 98% (more on demand)
- Low NOx
- Efficiency up to 95,5% with economizer
- Available to use gaseous and liquid fuels
- Superheated steam on demand
- CE System for conduction without supervisor for 72 continuous hours
- Designed and manufactured in compliance with CE Directives
Complementary/Supplementary accessories
- Water treatment (softener, reverse osmosis, demineralizer, etc)
- Atmopheric and pressurized deareator
- Blow down vessel (purge)
- Feed water tank
- Fuel storage tank
- Piping pre-mounted
- Chimney (with and without CE mark)
Steam boiler / fire tube / three-pass / wet back - IF
The IF steam generator is a semi-fixed model with totally wet bottom and pressurized combustion by â??flame reversalâ?. The furnace is built with localized hotformed waves without transversal welding. In the generator, the temperature is reduced to 900°C at the entrance...
Steam boiler / fire tube / three-pass / wet back - IF
The IF steam generator is a semi-fixed model with totally wet bottom and pressurized combustion by â??flame reversalâ?. The furnace is built with localized hotformed waves without transversal welding. In the generator, the temperature is reduced to 900°C at the entrance...
Containerized boiler / thermal fluid / hot water / steam
L.C.Z. PREFABRICATED THERMAL PLANT for production of
- Steam - Low/High pressure
- Hot water
- Superheated water
-...
- Steam - Low/High pressure
- Hot water
- Superheated water
-...
Containerized boiler / thermal fluid / hot water / steam
L.C.Z. PREFABRICATED THERMAL PLANT for production of
- Steam - Low/High pressure
- Hot water
- Superheated water
- Thermal fluid
Plant able for outdoor installation (increasing safety consisting of carbon steel frame, sound absorbing sandwich panels complete of suitable
- Chimney
- Electrical and Hydraulic pipings
- All equipment required (boiler, burner, water treatment, etc)
The plant is also available in ship container for an easier and cheaper transport.
- Steam - Low/High pressure
- Hot water
- Superheated water
- Thermal fluid
Plant able for outdoor installation (increasing safety consisting of carbon steel frame, sound absorbing sandwich panels complete of suitable
- Chimney
- Electrical and Hydraulic pipings
- All equipment required (boiler, burner, water treatment, etc)
The plant is also available in ship container for an easier and cheaper transport.
Steam boiler / fire tube
These types of boilers which are produced in accordance with TSE 337,EN 12953 standards that are used at all industrial systems, CE marked,and tested as per 97/23/EC...
Steam boiler / fire tube
These types of boilers which are produced in accordance with TSE 337,EN 12953 standards that are used at all industrial systems, CE marked,and tested as per 97/23/EC pressure vessels directive and module B+F. These boilers have cylindrical combustion chamber, three passes and are able to generate saturated and super-heated steam capacity up to 25 bars and 35 t/h.
Pressure: 0,5 25 bar
Capacity: 5 33 t/h
Fuel Type:
Natural gas, bio gas, LPG, LNG, CNG etc, any technical gas and liquid fuels
Boiler type:
Flame- smoke tube boilers, single or double room. These are produce with superheater or economizer by demand.
Pressure: 0,5 25 bar
Capacity: 5 33 t/h
Fuel Type:
Natural gas, bio gas, LPG, LNG, CNG etc, any technical gas and liquid fuels
Boiler type:
Flame- smoke tube boilers, single or double room. These are produce with superheater or economizer by demand.
Steam boiler / water tube
The Water Tube Boilers are used to meet high capacity and high pressure steam demands processes in industrial processes. These boilers are produced under German Eckrohrkessel GmbH license.
They are manufacture in accordance with TSE 377, EN12952 standards, tested and CE marked as per EN 97/23/EC pressure vessels directive and module B+F, designed, manufactured and tested according to ASME...
They are manufacture in accordance with TSE 377, EN12952 standards, tested and CE marked as per EN 97/23/EC pressure vessels directive and module B+F, designed, manufactured and tested according to ASME...
Steam boiler / water tube
The Water Tube Boilers are used to meet high capacity and high pressure steam demands processes in industrial processes. These boilers are produced under German Eckrohrkessel GmbH license.
They are manufacture in accordance with TSE 377, EN12952 standards, tested and CE marked as per EN 97/23/EC pressure vessels directive and module B+F, designed, manufactured and tested according to ASME Section I and S stamped. Water Tube Boilers are designed as D or O type with bi-drum or single drum for generating up to 80 bar pressure and 150t/h of saturated or super-heated steam.
These boilers can easily handle load fluctuations without changing pressure and temperature. They engage regimes quickly and are more resistant to thermal stress because of their design which has a low water volume.
Design:
Water Tube Boilers are designed according to EN 12952 , ASME section I or other standards depending on customer s request. The termal design and water circulation of boilers are provided by German Eckrohrkessel GmbH company that we are licensor, strength calculations and design details are made in Selnikel.
Boiler Features:
In single drum(O type) corner tube boilers that designed with Eckrohrkessel GmbH company license, steam and water begin to be separated in the upper steam overflow headers. The steam dryness is vey high and no water drift happens. Even though feed water purity is poor, steam is obtained in high purity.
In bi-drum(D type) boilers, combustion chamber and evaporator tube bundle through the membrane wall tube around them, respond very quickly to load demands. Circulation and water drift problems are eliminated by the special drum internal parts.
They are manufacture in accordance with TSE 377, EN12952 standards, tested and CE marked as per EN 97/23/EC pressure vessels directive and module B+F, designed, manufactured and tested according to ASME Section I and S stamped. Water Tube Boilers are designed as D or O type with bi-drum or single drum for generating up to 80 bar pressure and 150t/h of saturated or super-heated steam.
These boilers can easily handle load fluctuations without changing pressure and temperature. They engage regimes quickly and are more resistant to thermal stress because of their design which has a low water volume.
Design:
Water Tube Boilers are designed according to EN 12952 , ASME section I or other standards depending on customer s request. The termal design and water circulation of boilers are provided by German Eckrohrkessel GmbH company that we are licensor, strength calculations and design details are made in Selnikel.
Boiler Features:
In single drum(O type) corner tube boilers that designed with Eckrohrkessel GmbH company license, steam and water begin to be separated in the upper steam overflow headers. The steam dryness is vey high and no water drift happens. Even though feed water purity is poor, steam is obtained in high purity.
In bi-drum(D type) boilers, combustion chamber and evaporator tube bundle through the membrane wall tube around them, respond very quickly to load demands. Circulation and water drift problems are eliminated by the special drum internal parts.
Steam boiler / heat recovery
These type of boilers generate steam by recovering heat in the flue gas of facilities and significantly contribute energy efficiency of plant.
These are designed and manufactured under German Eckrohrkessel Gmbh license and in each module they generate saturated or super-heated steam up to 80 bar pressure and 100t/h.
Waste Heat Boilers are...
These are designed and manufactured under German Eckrohrkessel Gmbh license and in each module they generate saturated or super-heated steam up to 80 bar pressure and 100t/h.
Waste Heat Boilers are...
Steam boiler / heat recovery
These type of boilers generate steam by recovering heat in the flue gas of facilities and significantly contribute energy efficiency of plant.
These are designed and manufactured under German Eckrohrkessel Gmbh license and in each module they generate saturated or super-heated steam up to 80 bar pressure and 100t/h.
Waste Heat Boilers are designed, manufactured and tested in accordance with EN12952 standard, CE marked as per EN97/23/EC pressure vessels directive, module B+F, , or designed, manufactured and tested according to ASME Section-I and S stamped.
These boilers can easily handle load fluctuations without changing pressure and temperature. They engage regimes quickly and are more resistant to thermal stress because of their design which has a low water volume.
PROJECT:
Water tube boilers are designed according to EN12952 , ASME section I or other standards depending on customer s request. The thermal design and water circulation calculations of boilers are provided by German Eckrohrkessel GmbH company that we are licensor, strength calculations and design details are made in Selnikel.
BOILERS FEATURES:
Under German Eckrohrkessel GmbH license Selnikel designs and manufactures corner tube type waste heat boilers which have a specific design that downcomer and riser tubes work as boiler supporting elements that provide distinct advantages and differences.
These are designed and manufactured under German Eckrohrkessel Gmbh license and in each module they generate saturated or super-heated steam up to 80 bar pressure and 100t/h.
Waste Heat Boilers are designed, manufactured and tested in accordance with EN12952 standard, CE marked as per EN97/23/EC pressure vessels directive, module B+F, , or designed, manufactured and tested according to ASME Section-I and S stamped.
These boilers can easily handle load fluctuations without changing pressure and temperature. They engage regimes quickly and are more resistant to thermal stress because of their design which has a low water volume.
PROJECT:
Water tube boilers are designed according to EN12952 , ASME section I or other standards depending on customer s request. The thermal design and water circulation calculations of boilers are provided by German Eckrohrkessel GmbH company that we are licensor, strength calculations and design details are made in Selnikel.
BOILERS FEATURES:
Under German Eckrohrkessel GmbH license Selnikel designs and manufactures corner tube type waste heat boilers which have a specific design that downcomer and riser tubes work as boiler supporting elements that provide distinct advantages and differences.
Water boiler / charcoal / circulating fluidized bed (CFB)
Using the boiler and bed designknow-how of German Eckrohrkessel GmbH company we produce bubbling type fluidized bed coal boilers together with all ancillary facilities which burn low calorific value lignite coals most economically and in accordance with environmental regulations.
These...
These...
Water boiler / charcoal / circulating fluidized bed (CFB)
Using the boiler and bed designknow-how of German Eckrohrkessel GmbH company we produce bubbling type fluidized bed coal boilers together with all ancillary facilities which burn low calorific value lignite coals most economically and in accordance with environmental regulations.
These boilers are produced according to EN12952 standard up to 80 bar and 60t/h capacity range, as a single or multi compartment with 50% modulation in each compartment. These boilers engage regimes quickly due to its design with low water volume and they are more resistant to thermal stress.
Bubbling type fluidized bed coal fired boilers are able to burn lignite coal which has low heat value, sulphur, and high ash content in the most efficient way and ensure emissions values that are announced by the Ministry of Environment.
Boilers Features:
Under German Eckrohrkessel GmbH license Selnikel designs and manufactures corner tube type fluidized bed coal boilers which have a specific design that downcomer and riser tubes work as boiler supporting elements that provide distinct advantages and differences.
These boilers are produced according to EN12952 standard up to 80 bar and 60t/h capacity range, as a single or multi compartment with 50% modulation in each compartment. These boilers engage regimes quickly due to its design with low water volume and they are more resistant to thermal stress.
Bubbling type fluidized bed coal fired boilers are able to burn lignite coal which has low heat value, sulphur, and high ash content in the most efficient way and ensure emissions values that are announced by the Ministry of Environment.
Boilers Features:
Under German Eckrohrkessel GmbH license Selnikel designs and manufactures corner tube type fluidized bed coal boilers which have a specific design that downcomer and riser tubes work as boiler supporting elements that provide distinct advantages and differences.
Steam boiler / electric - 3 - 1 620 kW, max. 240 °F
Chromalox's Electric Steam and Hot Water Boilers deliver either minimal or comprehensive levels of steam...
Steam boiler / electric - 3 - 1 620 kW, max. 240 °F
Chromalox's Electric Steam and Hot Water Boilers deliver either minimal or comprehensive levels of steam or hot water pressure. These devices are commonly utilized for both commercial and industrial fields of application. They may also be used for comfort heating operations.
They are capable of operating using existing distribution voltage rates. This makes installation processes quicker and easier.
They are capable of operating using existing distribution voltage rates. This makes installation processes quicker and easier.