+7 (812) 645-08-06
Continuous furnaces
select brand
Belt conveyor furnace / tempering
This belt conveyor furnace from Sistem Teknik is designed for tempering furnace for leaf springs.
Walking beam furnace
Sistem Teknik Industrial Furnaces manufactures a walking beam type hardening furnace. This unit is especially designed for leaf springs.
Belt conveyor furnace / annealing / soldering / quenching
The belt conveyor brazing furnace is manufactured by Sistem Teknik Industrial Furnaces, and is made up of a mild steel and stainless steel that has a width...
Belt conveyor furnace / annealing / soldering / quenching
The belt conveyor brazing furnace is manufactured by Sistem Teknik Industrial Furnaces, and is made up of a mild steel and stainless steel that has a width...
Walking beam furnace / for leaf springs
Springs, which are suspension components, are the vital link between load-bearing machinery/vehicles and efficient load-bearing performances. It is the spring that bears the brunt of the strain from suspension of heavy loads. In order to facilitate load bearing tasks, springs that were produced earlier incorporated layers. Higher the load they were meant to bear, higher...
Walking beam furnace / for leaf springs
Springs, which are suspension components, are the vital link between load-bearing machinery/vehicles and efficient load-bearing performances. It is the spring that bears the brunt of the strain from suspension of heavy loads. In order to facilitate load bearing tasks, springs that were produced earlier incorporated layers. Higher the load they were meant to bear, higher the number of layers, leading to bulky and cumbersome spring elements.
Today, this problem has been overcome by manufacturing springs via parabolic rolling. Springs produced by parabolic rolling incorporate thick and thin segments, with thicker segments designed to withstand heavier load strains and thinner segments designed to withstand lighter load strains. The springs manufactured by parabolic rolling method are top quality and high strength springs, along with being light in weight.
The parabolic taper rolling furnaces designed by Sistem Teknik are equipped with burners positioned at the apex of the furnaces, which generate heat through combustion of natural gas. Multiple burners provide uniform heat to the springs as per heat requirement, depending on the type of part- whether high strain or low strain.
The heated springs are supposed to be removed in 1 minute, failing which, the control unit of the furnace sounds an audio-visual alarm in order to alert the operator. Simultaneously, the furnace is automatically cooled to 700oC by the control unit.
Today, this problem has been overcome by manufacturing springs via parabolic rolling. Springs produced by parabolic rolling incorporate thick and thin segments, with thicker segments designed to withstand heavier load strains and thinner segments designed to withstand lighter load strains. The springs manufactured by parabolic rolling method are top quality and high strength springs, along with being light in weight.
The parabolic taper rolling furnaces designed by Sistem Teknik are equipped with burners positioned at the apex of the furnaces, which generate heat through combustion of natural gas. Multiple burners provide uniform heat to the springs as per heat requirement, depending on the type of part- whether high strain or low strain.
The heated springs are supposed to be removed in 1 minute, failing which, the control unit of the furnace sounds an audio-visual alarm in order to alert the operator. Simultaneously, the furnace is automatically cooled to 700oC by the control unit.
Conveyor furnace / chain / for leaf springs
An eye-forming furnace, and the layers that connect the springs and the shaft are designed in a special way, as having two eyes, single eye and sometimes with no eye. One-eyed springs are the mostly commonly used ones. Bearings located within the eye...
Conveyor furnace / chain / for leaf springs
An eye-forming furnace, and the layers that connect the springs and the shaft are designed in a special way, as having two eyes, single eye and sometimes with no eye. One-eyed springs are the mostly commonly used ones. Bearings located within the eye...
Tubular furnace
Our main role in the past was to study and manufacture instruments for elemental analysis for laboratories in chemical industry applications. However, the demand for furnaces has prompted...
Tubular furnace
Our main role in the past was to study and manufacture instruments for elemental analysis for laboratories in chemical industry applications. However, the demand for furnaces has prompted us to manufacture them so they could fit analyzers. Years of persistent research have enabled us to be successful in this endeavor causing us to manufacture different kinds of furnaces. The photos that you are looking at are not the typical standard versions, but rather those that were built according to customer specifications and demands, depending on the conditions they are used for. We are fully equipped to manufacture furnaces according to your specifications, and that includes pressure control systems and also gas and liquid flow that goes through them.
Horizontal tube furnace / laboratory
This is a horizontal laboratory tube furnace manufactured by Eraly and Associes which is engineered in order to fit to those analyzers. The manufacturer is...
Horizontal tube furnace / laboratory
This is a horizontal laboratory tube furnace manufactured by Eraly and Associes which is engineered in order to fit to those analyzers. The manufacturer is well known for its ability to create an instrument designed for elemental analysis in laboratories and chemical industries. The manufacturer ensures that each model is made according the specifications that the customer had requested. The design of this tube furnace is well designed and calibrated according to a schedule condition and the preference of the customer. Through this tool, it makes the user pressure control system and rate of flow become more reliable.
Tubular furnace / vertical / laboratory
The laboratory vertical tube furnace manufactured by Eraly and Associes are specialized to measure....
Tubular furnace / vertical / laboratory
The laboratory vertical tube furnace manufactured by Eraly and Associes are specialized to measure. This product can have personalized adjustment for the users needs. This device can measure ovens and reactors, the pressure control systems and the flow rate of gas and liquid passing through the system. It is specifically developed for laboratories dealing with the chemical industry.
Tubular furnace - PUITS
The PUITS, manufactured by Eraly, is a metal frame furnace equipped with two flanges. It is used for operations that require efficient separation and standardized heating zone.
Worm gear furnace - max. 700 °C, max. 2000 kg/h | SPIRAJOULE®
The SPIRAJOULE® technology is an exclusive process developed for thermal treatment. The design involves a worm screw conveyor that is electrically heated by a low voltage current. The screw heats the product with the joule effect. The regulation of the screw...
Worm gear furnace - max. 700 °C, max. 2000 kg/h | SPIRAJOULE®
The SPIRAJOULE® technology is an exclusive process developed for thermal treatment. The design involves a worm screw conveyor that is electrically heated by a low voltage current. The screw heats the product with the joule effect. The regulation of the screw...
Pyrolysis furnace / continuous / for biomass / for waste - Spirajoule®
The Spirajoule® technology is an exclusive process for thermal treatment. It is designed...
Pyrolysis furnace / continuous / for biomass / for waste - Spirajoule®
The Spirajoule® technology is an exclusive process for thermal treatment. It is designed...