Needle valves, piston valves

select brand


SCHUNK

Piston valve / pick & place / actuator control / pneumatic - max. 30 l/min | MV 10

DN : 1 mm

Micro Valve MV 10 is specifically designed for small actuators and
provides boost in productivity and energy efficiency of Pick&Place
small parts applications. The very small size, with a...

Piston valve / pick & place / actuator control / pneumatic - max. 30 l/min | MV 10

Micro Valve MV 10 is specifically designed for small actuators and
provides boost in productivity and energy efficiency of Pick&Place
small parts applications. The very small size, with a maximum
interfering contour of only 9 mm, enables direct integration in
grippers or other pneumatic actuators.The MV 10 provides compressed
air consumption that is reduced to the volume of the piston chamber in
the actuator. This feature allows saving of up to 90% on the compressed
air while the improved response behavior reduces cycle time.
With an outer diameter of 9 mm and a nominal diameter of 1 mm,
the micro valve can provide substantially higher flow rate than any other
solution available on the market as it can reach the flow of up to 30 Nl/min.
CAMOZZI

Unidirectional valve / bi-directional / needle / flow-control - ø 1.5 - 12 mm, 1 - 10 bar, M5 - G1/2 | xCU, xVU, xCO series

This series of valves uses unidirectional and bidirectional controls and has a needle type construction. This uses stainless steel bodies with 1/8, 1/4, 3/8 and 1/2...

Unidirectional valve / bi-directional / needle / flow-control - ø 1.5 - 12 mm, 1 - 10 bar, M5 - G1/2 | xCU, xVU, xCO series

This series of valves uses unidirectional and bidirectional controls and has a needle type construction. This uses stainless steel bodies with 1/8, 1/4, 3/8 and 1/2 OT measurements and NBR seals. The mounting is done through a male thread connection, while this can be installed in any position.
This series operates from 0 to 80 degrees Celsius or at 20 degrees Celsius with dry air. The product withstands 1-10 bars of pressure but 6 bars is the nominal pressure value. This has a filtered air setting and the nominal diameter canl go from 1.5 mm (M5) through to 12 mm(G1/8), 4 mm (G1/4), 7mm (G3/8) to 12 mm(G1/2) depending on the type of valve.

Needle valve / unidirectional / bi-directional / flow-control - ø 1.5 - 7 mm, M5 - G3/8 | PxCU, PxVU, PxCO series

These needle-type flow control valves act as unidirectional and bidirectional controllers. The valves are installed in any position and mounted by male thread....

Needle valve / unidirectional / bi-directional / flow-control - ø 1.5 - 7 mm, M5 - G3/8 | PxCU, PxVU, PxCO series

These needle-type flow control valves act as unidirectional and bidirectional controllers. The valves are installed in any position and mounted by male thread....

Bi-directional valve / unidirectional / needle / flow-control - ø 2 - 8 mm, G1/8 - G1/2 | TMxx series

Construction needle - type
Valve group unidirectional and bidirectional controller
Materials brass - technopolymer - NBR
Mounting by male threaded
Threaded...

Bi-directional valve / unidirectional / needle / flow-control - ø 2 - 8 mm, G1/8 - G1/2 | TMxx series

Construction needle - type
Valve group unidirectional and bidirectional controller
Materials brass - technopolymer - NBR
Mounting by male threaded
Threaded...

Bi-directional valve / unidirectional / needle / flow-control - ø 1.5 - 12 mm, M5 - G1/4 | GxCU, GxVU, GxCO series

Construction needle - type
Valve group unidirectional and bidirectional controller
Materials body and screws M5 inox; 1/8...

Bi-directional valve / unidirectional / needle / flow-control - ø 1.5 - 12 mm, M5 - G1/4 | GxCU, GxVU, GxCO series

Construction needle - type
Valve group unidirectional and bidirectional controller
Materials body and screws M5 inox; 1/8...

Unidirectional valve / needle / bi-directional / flow-control - ø 1.5 - 7 mm, 1 - 10 bar, M5 - G1/2 | RFU, RFO

Parts of the bidirectional and unidirectional valve group, these controls have a needle-type construction. The body is made of aluminum and the needle...

Unidirectional valve / needle / bi-directional / flow-control - ø 1.5 - 7 mm, 1 - 10 bar, M5 - G1/2 | RFU, RFO

Parts of the bidirectional and unidirectional valve group, these controls have a needle-type construction. The body is made of aluminum and the needle...
Clippard

Needle valve - 6 scfm, max. 2000 psi | MNV-1

This valve belongs to the MNV-1 Series. It operates at a temperature...

Needle valve - 6 scfm, max. 2000 psi | MNV-1

This valve belongs to the MNV-1 Series. It operates at a temperature range between 32 to 230 degrees F. The ports have between 10 and 32 threads. It has an air flow of 6 scfm at 100 psig. It can operate at a pressure maximum of of 2000 psig.

Needle valve - 2.5 scfm, max. 2000 psig | MNV-2

Panel Mount Needle Valve
Notes

K=knob
Additional...

Needle valve - 2.5 scfm, max. 2000 psig | MNV-2

Panel Mount Needle Valve
Notes

K=knob
Additional Information

Air Flow 2.5 scfm@ 100 psig
Max PSI 2000 psig
Ports 10-32 Thread
Temperature Range 32 to 230 F

Needle valve - 5 scfm, max. 2000 psi | MNV-3

Needle Valve, #10-32 Input Ports
Notes

K=knob
Additional...

Needle valve - 5 scfm, max. 2000 psi | MNV-3

Needle Valve, #10-32 Input Ports
Notes

K=knob
Additional Information

Air Flow 5 scfm@ 100 psig
Max PSI 2000 psig
Ports 10-32 Thread
Temperature Range 32 to 230 F

Needle valve / miniature - 5 scfm, max. 300 psi | MNV-4

The Clippard MNV-4 Series uses an air flow of 0-5 scfm...

Needle valve / miniature - 5 scfm, max. 300 psi | MNV-4

The Clippard MNV-4 Series uses an air flow of 0-5 scfm at 100 psig and can handle a maximum PSI of 300 psig. It can be used with air, oil, or water, and can be used in an environment from 32 to 230 degrees.
{{item.name}}