+7 (812) 645-08-06
Manifolds
select brand
Changeover manifold - max. 3 500 psig | ACS012 series
A lightweight and compact changeover regulator designed for corrosive, pyrophoric and specialty gases, the TESCOM™ ACS012...
Changeover manifold - max. 3 500 psig | ACS012 series
A lightweight and compact changeover regulator designed for corrosive, pyrophoric and specialty gases, the TESCOM™ ACS012 features a diaphragm metal seal that is resistant to diffusion and ensures the purity of gas and its integrity.
It is designed to provide a continuous flow of gas from two different sources of pressure, and is best for use in CO2 for cell culture and tissue culture incubators, laser resonator gas applications and even in analyzer carrier gas applications
It is designed to provide a continuous flow of gas from two different sources of pressure, and is best for use in CO2 for cell culture and tissue culture incubators, laser resonator gas applications and even in analyzer carrier gas applications
Changeover manifold - max. 3 000 psig | ACS3200 series
This changeover regulator is compact, made for high purity, very
lightweight, obtains high flow. Can be used for...
lightweight, obtains high flow. Can be used for...
Changeover manifold - max. 3 000 psig | ACS3200 series
This changeover regulator is compact, made for high purity, very
lightweight, obtains high flow. Can be used for pyrophoric gases.
The metal diaphragm seal, diffusion-resistant
ensures the purity of the gas and integrity. Can achieve continuous
low flow of gas from two pressure sources. It is ideal for use in incubator
supply industry, for tissue and cell culture, as well as in metal fabrication,
where laser assisting gases are used.
lightweight, obtains high flow. Can be used for pyrophoric gases.
The metal diaphragm seal, diffusion-resistant
ensures the purity of the gas and integrity. Can achieve continuous
low flow of gas from two pressure sources. It is ideal for use in incubator
supply industry, for tissue and cell culture, as well as in metal fabrication,
where laser assisting gases are used.
Changeover manifold - max. 4 350 psig
TESCOM™ Compact Panel is designed and developed as a central gas supply unit to provide pressure control on analytical gases used in laboratory facilities.
These...
These...
Changeover manifold - max. 4 350 psig
TESCOM™ Compact Panel is designed and developed as a central gas supply unit to provide pressure control on analytical gases used in laboratory facilities.
These panels have a compact, robust design ideal as central supply of gases for laser cutting applications or any applications requiring continuous gas supply. Made with a stainless steel mounting plate, it can withstand any corrosive environment. Integrating valves and pressure regulator in one body makes this panel cost efficient since it only requires few connections.
Depending on the requirements, these units can also switch over to a spare cylinder in order to enable a continuous gas supply.
These panels have a compact, robust design ideal as central supply of gases for laser cutting applications or any applications requiring continuous gas supply. Made with a stainless steel mounting plate, it can withstand any corrosive environment. Integrating valves and pressure regulator in one body makes this panel cost efficient since it only requires few connections.
Depending on the requirements, these units can also switch over to a spare cylinder in order to enable a continuous gas supply.
Changeover manifold - max. 6 000 psig | CR441800 series
The CR441800 series from TESCOM is a high-pressure changeover system...
Changeover manifold - max. 6 000 psig | CR441800 series
The CR441800 series from TESCOM is a high-pressure changeover system with a compact design. It is ideal for applications involving laser resonator gas and analyzer carrier gas. The design of the system includes two pressure sources that provide continuous low gas flow.
Changeover manifold - max. 3 500 psig | CS-2200 series
TESCOM™ CS-2200 Series is a complete high purity changeover system designed to provide a tightly packed, safe and reliable...
Changeover manifold - max. 3 500 psig | CS-2200 series
TESCOM™ CS-2200 Series is a complete high purity changeover system designed to provide a tightly packed, safe and reliable wall mounted solution for analyzer carrier, tissue and cell culture incubators and laser resonator gas applications that use specialty, corrosive, and pyrophoric gases. It represents a combination of the changeover regulator and a line regulator and is equipped with a metal diaphragm that enables high purity and integrity of gas due to a high diffusion resistance.
4-valve manifold / refrigerant / measuring / for HVAC - -14.7 psi ... +725 psi, -50 °C ... +150 °C | 557
The TESTO 557 is a all-in-one product, that will simplify the maintenance process that technicians have to struggle with every day. It is used as a digital manifold...
4-valve manifold / refrigerant / measuring / for HVAC - -14.7 psi ... +725 psi, -50 °C ... +150 °C | 557
The TESTO 557 is a all-in-one product, that will simplify the maintenance process that technicians have to struggle with every day. It is used as a digital manifold for the maintenance of refrigeration systems and heat pumps. It represents a replacement for multiple devices such as thermometers, pressure and temperature tables and various mechanical manifolds. The device features 4-way valve block that enables connectivity with multiple system elements. Also, it contains integrated vacuum measurement. It offers connection for up to 2 NTC probes, measurement for various pressures and calculation of the superheating/supercooling processes in real time.
Hydraulic manifold / polyamide - DN 13, max. 10 bar
This manifold, made from polyamide, has either three or four connections and is ideal for fluid distribution and the merging of medium paths. The industry...
Hydraulic manifold / polyamide - DN 13, max. 10 bar
This manifold, made from polyamide, has either three or four connections and is ideal for fluid distribution and the merging of medium paths. The industry standard connection thread sizes enable the manifold to be integrated into numerous applications. The internal diameter of 13mm allows for a high throughput, whilst maintaining minimal pressure losses. Whether you build the manifold into a new design or retro-fit one into existing equipment, it provides a simple method of adding additional media paths or connection possibilities for components such as valves, push-fit connectors or outlet nozzles.