+7 (812) 645-08-06
Vertical pumps
select brand
Turbine pump / vertical - max. 13 600 m3/h, max. 100 bar | VTP series
The FlowServe's Vertical Turbine Pump (VTP) serves as a solution for various applications which are in line with wet pit and deep well services. It is specifically made in compliance with...
Turbine pump / vertical - max. 13 600 m3/h, max. 100 bar | VTP series
The FlowServe's Vertical Turbine Pump (VTP) serves as a solution for various applications which are in line with wet pit and deep well services. It is specifically made in compliance with the ISO 13709/API 610 (VS1). It comes with a fabricated steel or cast iron discharge head. The pump features several drivers encompassing electric motors, stream turbines and engines which are integrated with a right angle gear drives. It offers a sealing configuration system for an enclosed lineshaft framework structure. This system includes an either single or dual mechanical seal and packed box with a graphite packing.
It is ideal and suitable for fields like mining, oil and gas, primary metals, power generation and other comparable industries.
It is ideal and suitable for fields like mining, oil and gas, primary metals, power generation and other comparable industries.
Centrifugal pump / vertical - max. 500 m3/h, max. 40 bar | PVXM series
The PVXM ISO 13709/API 610 (OH3) is a vertical in-line overhung API process pump is...
Centrifugal pump / vertical - max. 500 m3/h, max. 40 bar | PVXM series
The PVXM ISO 13709/API 610 (OH3) is a vertical in-line overhung API process pump is equipped with a discharger mechanism and a robust in-line bearing casing. It conforms with the new ISO 13709 or API 610 and BS 4082R criteria. The device is an alternative to horizontal overhung process pumps in difficult and easy operations.
Single-stage pump / vertical - max. 27 m3/h, max. 60 bar | MSP series
MSP Vertical In-Line is a single-stage pump designed with a speed induction engine with moderate...
Single-stage pump / vertical - max. 27 m3/h, max. 60 bar | MSP series
MSP Vertical In-Line is a single-stage pump designed with a speed induction engine with moderate speed. It is convenient, cost-effective and highly-productive. It provides users with easy and quick installation process and reduced maintenance in either high or low-flow work operations. It has a maximum suction pressure of 40 bar and an operating speed of 2,000 to 8,000 rpm.
Centrifugal pump / multi-stage / vertical - max. 75 m³/h, max. 401 m | Movitec A
These KSB multi stage vertical high pressure centrifugal pumps come with a ring section design with suction and discharge nozzles...
Centrifugal pump / multi-stage / vertical - max. 75 m³/h, max. 401 m | Movitec A
These KSB multi stage vertical high pressure centrifugal pumps come with a ring section design with suction and discharge nozzles of identical nominal diameters, which are opposite facing in line design and close-coupled. Pumps that are required to meet ATEX standards are also available. They can be employed for many uses, including irrigation and spray irrigation, washing, water treatment, fire fighting, pressure boosting systems and many more. They are available in sizes 6 (LHS), 45, and 65.
Centrifugal pump / multi-stage / vertical - max. 112.8 m³/h, max. 249 m | Movitec B
The Movitec B Series, manufactured by KSB, is a multiple stage centrifugal pump designed to transfer fluids by means of the...
Centrifugal pump / multi-stage / vertical - max. 112.8 m³/h, max. 249 m | Movitec B
The Movitec B Series, manufactured by KSB, is a multiple stage centrifugal pump designed to transfer fluids by means of the alteration of rotational kinetic energy to the hydrodynamic energy of the fluid movement. It features equal diameter discharge nozzles and ATEX-compliant version.
Moreover, this pump is used in boiler feed systems, water treatment, fire-fighting and pressure booster system, hot water and cooling water re-circulation and spray irrigation applications.
Moreover, this pump is used in boiler feed systems, water treatment, fire-fighting and pressure booster system, hot water and cooling water re-circulation and spray irrigation applications.
Centrifugal pump / vertical - max. 65 000 m³/h, max. 33 m | SEZ
The KSB Products and Services erect tubular casing pump comes with a mixed flow impeller that is open. The Vertical Tubular...
Centrifugal pump / vertical - max. 65 000 m³/h, max. 33 m | SEZ
The KSB Products and Services erect tubular casing pump comes with a mixed flow impeller that is open. The Vertical Tubular casing pump is used in original, raw, cooling water and service industry, water supply mechanisms, power stations and seawater purification units.
The inlet of the pump has a bellmouth or suction elbow, draw out layout, release nozzle stacked above or beneath the floor and flanges which adhere to DIN or ANSI norms.
The inlet of the pump has a bellmouth or suction elbow, draw out layout, release nozzle stacked above or beneath the floor and flanges which adhere to DIN or ANSI norms.
Centrifugal pump / vertical - max. 980 m³/h, max. 135 m | CTN/-H
The CTN/-H is a submersible pump that is equipped with a radial impeller and a double volute...
Centrifugal pump / vertical - max. 980 m³/h, max. 135 m | CTN/-H
The CTN/-H is a submersible pump that is equipped with a radial impeller and a double volute for wet-well and dry installation. Designed with a vertical shaft, this radially-split pump is capable of single entry, as well as one or two stages. A heatable version of this type is also available.
It is ideal for chemical and petrochemical applications.
It is ideal for chemical and petrochemical applications.
Centrifugal pump / vertical / chemical process - max. 1 600 m³/h, max. 100 m | INVCP / INVCN
The upright centrifugal pump has a base plate and designed for the pits and tanks....
Centrifugal pump / vertical / chemical process - max. 1 600 m³/h, max. 100 m | INVCP / INVCN
The upright centrifugal pump has a base plate and designed for the pits and tanks. It has both closed, or semi-open impeller. The discharge pipe of INVCP is supplied to the exterior of the base plate.
It is designed for destructive fluids with little solid contents in the chemical and petrochemical industry.
It is designed for destructive fluids with little solid contents in the chemical and petrochemical industry.
Submersible pump / for slurries / vertical / cast iron - 20 - 500 m³/h | PGM series
Special pumps designed and studied for the pumping high density abrasive slurries.
Vertical axis with bearings in stuffing box designed to allow the lower part of the shaft to work overhang...
Vertical axis with bearings in stuffing box designed to allow the lower part of the shaft to work overhang...
Submersible pump / for slurries / vertical / cast iron - 20 - 500 m³/h | PGM series
Special pumps designed and studied for the pumping high density abrasive slurries.
Vertical axis with bearings in stuffing box designed to allow the lower part of the shaft to work overhang without mountings submerged into the liquid. Bodies are in cast-iron, divided in two halves with protective lining made in our special antiwear moulded rubber (composed of interchangeable shells adjustable from outside). The impeller is anticlogging, open type composed of a steel core lined with special antiabrasive compound.
Direct coupling through elastic joint in two pieces.
TECHNICAL SPECIFICATIONS
Power from 4 to 55kW
Capacity from 20m3/h to 500 m3/h
Head from 5 to 25m
Max liquid level from 780mm to 1750mm
Vertical axis with bearings in stuffing box designed to allow the lower part of the shaft to work overhang without mountings submerged into the liquid. Bodies are in cast-iron, divided in two halves with protective lining made in our special antiwear moulded rubber (composed of interchangeable shells adjustable from outside). The impeller is anticlogging, open type composed of a steel core lined with special antiabrasive compound.
Direct coupling through elastic joint in two pieces.
TECHNICAL SPECIFICATIONS
Power from 4 to 55kW
Capacity from 20m3/h to 500 m3/h
Head from 5 to 25m
Max liquid level from 780mm to 1750mm
Submersible pump / conveying / for slurries / vertical - 6 - 120 m³/h | PRD series
Special pumps designed and studied for the conveying of particularly abrasive thick muds with specific gravity up to 2,5 ton/m3. Suitable, above all, for the empty of decantation tanks and for...
Submersible pump / conveying / for slurries / vertical - 6 - 120 m³/h | PRD series
Special pumps designed and studied for the conveying of particularly abrasive thick muds with specific gravity up to 2,5 ton/m3. Suitable, above all, for the empty of decantation tanks and for the conveying the thick muds to tanks/pits for processing.
This type of pump does not have the snore piece as the mud/slurry to be pumped falls into the pump body.
Vertical axis with bearings in stuffing box designed to allow the lower part of the shaft to work overhang without mountings submerged into the liquid. The bodies are in spheroidal cast-iron with supwards suction mouth as to allow the income of particularly thick muds to the impeller. The impeller is with channels in spheroidal cast-iron.
Special impeller design and low mud speed assure long life to pump wear parts.
This type of pump does not have the snore piece as the mud/slurry to be pumped falls into the pump body.
Vertical axis with bearings in stuffing box designed to allow the lower part of the shaft to work overhang without mountings submerged into the liquid. The bodies are in spheroidal cast-iron with supwards suction mouth as to allow the income of particularly thick muds to the impeller. The impeller is with channels in spheroidal cast-iron.
Special impeller design and low mud speed assure long life to pump wear parts.