+7 (812) 645-08-06
Centrifugal pumps
select brand
Submersible pump / centrifugal - CP 0010, CP 0020
The CP0010 and CP0020 submersible pumps are single-stage centrifugal models, with powerful vane motors,...
Submersible pump / centrifugal - CP 0010, CP 0020
The CP0010 and CP0020 submersible pumps are single-stage centrifugal models, with powerful vane motors, that offer excellent durability and high performance in liquid removal applications such as trenches, ditches, manholes, industrial sumps and excavations. These units feature built-in oilers, strainers and air inlet valves, with double seal protection of motor and bearings from water and mud.
Centrifugal pump / magnetic-drive / close-coupled - max. 500 m3/h, max. 40 bar | PVML-Mag series
The PVML-Mag API 685 is an overhung, vertical in-line magnetic drive pump. It...
Centrifugal pump / magnetic-drive / close-coupled - max. 500 m3/h, max. 40 bar | PVML-Mag series
The PVML-Mag API 685 is an overhung, vertical in-line magnetic drive pump. It is ideally used in multiple applications such as emission reduction, petrochemical management, gas industry service, acid transfer, and toxic services. The device also has a flow rate of 500 m3/h (2200 gpm) and 275 m (900 ft) heads.
Centrifugal pump / vertical - max. 115 000 m3/h | BSV, BCV
The CVP Vertical Concrete Volute Wet Pit Pump, engineered by Flowserve, caters to a variety...
Centrifugal pump / vertical - max. 115 000 m3/h | BSV, BCV
The CVP Vertical Concrete Volute Wet Pit Pump, engineered by Flowserve, caters to a variety of industries such as water resources, power generation, universal industry, and the likes. Also, the device is typically used for ground water processes and irrigation, water cooling (power), nuclear facility, water distributions, flood control, and shipping.
Centrifugal pump / single-stage - max. 12 000 m3/h, max. 150 bar | DVSH series
The FlowServe's Crude and CO2 Pipeline is specifically made and created in accordance to the API682, API610 standards and...
Centrifugal pump / single-stage - max. 12 000 m3/h, max. 150 bar | DVSH series
The FlowServe's Crude and CO2 Pipeline is specifically made and created in accordance to the API682, API610 standards and specifications. It can be used in various fields like in the industry of mining (Dewatering and Water Supply), pulp and paper (Boiler Feed), oil and gas (Distillation), chemical processing and power generation. It is constructed based on the Double Volute, Axially Split Casing Design which reduces possible hydraulic radical forces at any state.
Centrifugal pump / multi-stage - max. 2950 m3/h, max. 275 bar | DMX series
The DMX multi-stage pumps are designed for use in injection, process charge, and pipeline operations. With its axially split construction, the pump complies with API...
Centrifugal pump / multi-stage - max. 2950 m3/h, max. 275 bar | DMX series
The DMX multi-stage pumps are designed for use in injection, process charge, and pipeline operations. With its axially split construction, the pump complies with API 610 (BB3) industry standard.
Specifically, the DMX has been proven in applications such as renewable fuel production, hydraulic metal pressing, ground water treatment and irrigation, desalination, and oil and gas distillation. These pumps are also suitable for use in hydrotreating, hydrocracking, water and carbon dioxide injection, descaling, supplying water in mining operations, nuclear applications, paper and pulp boiler feeding, LNG, sulfur recovery and gas treating.
Specifically, the DMX has been proven in applications such as renewable fuel production, hydraulic metal pressing, ground water treatment and irrigation, desalination, and oil and gas distillation. These pumps are also suitable for use in hydrotreating, hydrocracking, water and carbon dioxide injection, descaling, supplying water in mining operations, nuclear applications, paper and pulp boiler feeding, LNG, sulfur recovery and gas treating.
Centrifugal pump / process / magnetic-drive - max. 40 bar | PHL series
PHL ISO 13709/API 610 center line mounted process pump is a magnetic output of PHL horizontal,...
Centrifugal pump / process / magnetic-drive - max. 40 bar | PHL series
PHL ISO 13709/API 610 center line mounted process pump is a magnetic output of PHL horizontal, overhung impeller scheme. Its hydraulic fitting is configured according to system specifications through the use of upgraded diffuser mechanism. The setup secures a comprehensive leak-proof performance with the assurance that the fluid being processed is free of any contaminants.
Centrifugal pump / chemical process - max. 750 m³/h, max. 25 bar | CPXR
The CPXR Recessed Impeller ISO Chemical Process Pump from Flowserve is capable of...
Centrifugal pump / chemical process - max. 750 m³/h, max. 25 bar | CPXR
The CPXR Recessed Impeller ISO Chemical Process Pump from Flowserve is capable of pumping stringy or fibrous slurries with minimal shear. With only minimal contact, the vortex of swirling liquids draw the solid components into the center, which is then released to the front of the impeller by a strong centrifugal force.
Centrifugal pump / magnetic-drive / chemical process - max. 420 m³/h, max. 25 bar | CPXS
Flow rate : max 420.0 m³/h
Operating pressure : max 25.0 bar
The CPXS is a magnetic drive pump that avoids leakage of toxic, flammable, explosive,...
Operating pressure : max 25.0 bar
The CPXS is a magnetic drive pump that avoids leakage of toxic, flammable, explosive,...
Centrifugal pump / magnetic-drive / chemical process - max. 420 m³/h, max. 25 bar | CPXS
The CPXS is a magnetic drive pump that avoids leakage of toxic, flammable, explosive, important fluids while pumping. It follows the ISO 2858 dimensional and ISO 15783 design criteria. This drive pump can be applied in applications such as water treatment, water supply and treatment, acid transfer, construction, solvents and polymers.
Centrifugal pump / chemical-resistant / close-coupled - max. 570 m³/h, max.25 bar | Durco Mark 3
The Durco Mark 3 ISO Close Coupled pump is made in accordance to ISO 2858 and ISO 5199...
Centrifugal pump / chemical-resistant / close-coupled - max. 570 m³/h, max.25 bar | Durco Mark 3
The Durco Mark 3 ISO Close Coupled pump is made in accordance to ISO 2858 and ISO 5199 structure guidelines. It is designed with a space-saving, small-built features that is ideally suited for industrial applications, or any other processes with narrow and confined space. It has a flow rate of 570 m3/h and a working pressure of 365 psi.
Centrifugal pump / self-priming / chemical process - max. 100 m³/h, max. 25 bar | Durco Mark 3
Durco Mark 3 ISO chemical process pump, known for its intelligent integration of components and also their minimal usage. The main part of the device has a huge large priming chamber, air separator and volute. Reflux...
Centrifugal pump / self-priming / chemical process - max. 100 m³/h, max. 25 bar | Durco Mark 3
Durco Mark 3 ISO chemical process pump, known for its intelligent integration of components and also their minimal usage. The main part of the device has a huge large priming chamber, air separator and volute. Reflux...
Centrifugal pump / magnetic-drive / chemical process - max. 375 m³/h, max. 24 bar | Guardian
Flow rate : max 375.0 m³/h
Operating pressure : max 24.0 bar
The Guardian Overhung Magnetic Drive Chemical Process Pump is engineered by Flowserve. It is a...
Operating pressure : max 24.0 bar
The Guardian Overhung Magnetic Drive Chemical Process Pump is engineered by Flowserve. It is a...
Centrifugal pump / magnetic-drive / chemical process - max. 375 m³/h, max. 24 bar | Guardian
The Guardian Overhung Magnetic Drive Chemical Process Pump is engineered by Flowserve. It is a flat, magnetic controlled pump that conforms with the ASME B73.1 dimensional criteria. The device offers a conventional and dependable design applicable for emission-free service requirements. With its existing Mark 3 housing and impeller, maintained pneumatic performance is achieved.