+7 (812) 645-08-06

Centrifugal pumps

select brand

Centrifugal pump / circulation / magnetic-drive - 9 - 24 VDC, max. 8 gpm | INTG3 series

Designed for the circulation and transfer of fluids, GRIs Integrity Series Magnetic Drive Circulation Pumps offer a flexible and robust pumping solution to OEM fluid circulation applications....

Centrifugal pump / circulation / magnetic-drive - 9 - 24 VDC, max. 8 gpm | INTG3 series

Designed for the circulation and transfer of fluids, GRIs Integrity Series Magnetic Drive Circulation Pumps offer a flexible and robust pumping solution to OEM fluid circulation applications. By manufacturing the motors and the majority of the pumps components in-house, GRI has the flexibility to precisely configure an Integrity Series pump to meet an OEMs specific flow and pressure requirements.

Equipped with an integrated 9 to 24 volt brushless DC motor, the magnetically driven pumps incorporate the components into a compact, lightweight design, eliminating motor bearings and leaving the impeller assembly as the only moving part. Fewer parts promote long life, quiet operation, and low power consumption.

Centrifugal pump / magnetic-drive - max. 11 gpm | 14110 series

The 14110 Series magnetic drive pumps have flow rates that reach up to 11 gpm. It has a maximum system pressure that reaches 75 psi while the...

Centrifugal pump / magnetic-drive - max. 11 gpm | 14110 series

The 14110 Series magnetic drive pumps have flow rates that reach up to 11 gpm. It has a maximum system pressure that reaches 75 psi while the...

Centrifugal pump / magnetic-drive - max. 26 gpm | 14520 series

Models in the 14520 pump series are capable of average flow rates up to 26gpm, depending on the model type. Standard models...

Centrifugal pump / magnetic-drive - max. 26 gpm | 14520 series

Models in the 14520 pump series are capable of average flow rates up to 26gpm, depending on the model type. Standard models...

Centrifugal pump / magnetic-drive - max. 3.75 gpm | 15651 series

The Vectra® Pump 15651 series offers chemical resistance to most acids, oxidants and bleaches, as well as various organic solvents....

Centrifugal pump / magnetic-drive - max. 3.75 gpm | 15651 series

The Vectra® Pump 15651 series offers chemical resistance to most acids, oxidants and bleaches, as well as various organic solvents....

Centrifugal pump / magnetic-drive - max. 35 gpm | 15700 series

The 15700 series of magnetic centrifugal drive pumps feature flow rates of up to 35 gpm and can operate with...

Centrifugal pump / magnetic-drive - max. 35 gpm | 15700 series

The 15700 series of magnetic centrifugal drive pumps feature flow rates of up to 35 gpm and can operate with...

Centrifugal pump / single-stage / process - max. 100 m, max. 250 m³/h | Etaseco

The KSB's Etaseco is a single-stage centrifugal process (horizontal/vertical) pump which comes in a back...

Centrifugal pump / single-stage / process - max. 100 m, max. 250 m³/h | Etaseco

The KSB's Etaseco is a single-stage centrifugal process (horizontal/vertical) pump which comes in a back pull-out framework construction. This pump is encased in a canned motor and is accompanied by a radial impeller and a pump casing bridging dimensions in compliance with the EN733. Through its single stage and single entry features, the pump is capable of handling aggressive liquids in the chemical industry.

Centrifugal pump / explosion-proof - max. 220 m, max. 300 m³/h, ATEX | Secochem Ex

KSB Secochem Ex is a seal-less horizontal volute casting pump with a back pull-out construction and completely enclosed canned motor.
It is characterized...

Centrifugal pump / explosion-proof - max. 220 m, max. 300 m³/h, ATEX | Secochem Ex

KSB Secochem Ex is a seal-less horizontal volute casting pump with a back pull-out construction and completely enclosed canned motor.
It is characterized with a low noise and it has a radial impeller and it is designed to ATEX. It is a single entry, single stage pump. The casing connections are executed through usage of the ISO 2858 and EN 22 858 standards.
This pump is capable of operating with flammable, aggressive, toxic, explosive, valuable or volatile liquids in petrochemical and chemical industry. It can also be used in environmental engineering applications and in general industry.

Centrifugal pump / magnetic-drive - max. 236 m, max. 1 400 m³/h | Magnochem

The magnetic drive pump is designed according to ISO 2858 / EN 22 858 / ISO 5199 standards...

Centrifugal pump / magnetic-drive - max. 236 m, max. 1 400 m³/h | Magnochem

The magnetic drive pump is designed according to ISO 2858 / EN 22 858 / ISO 5199 standards and it features a unique single-level layout with circular impeller. It is ideal for applications involving the chemical, petrochemical and general industry to handle violent, lethal, explosive, cherished, combustible, foul-smelling and harmful liquids.

Centrifugal pump / magnetic-drive / close-coupled - max. 236 m, max. 754 m³/h | Magnochem-Bloc

KSB single-stage volute casing pump feature a close-coupled design. The hydraulics and casing dimensions of the pump cater to CPK chemical...

Centrifugal pump / magnetic-drive / close-coupled - max. 236 m, max. 754 m³/h | Magnochem-Bloc

KSB single-stage volute casing pump feature a close-coupled design. The hydraulics and casing dimensions of the pump cater to CPK chemical standardized pump and maintain standards of EN 22 858 / ISO 2858 / ISO 5199. This is a single-entry radial pump endowed with impeller. The seal-less magnetic drive pumps are used in hard-to-seal and process applications like pumping aggressive, toxic, explosive, malodorous or hazardous fluids in chemical, petrochemical, valuable, inflammable, and general industrial processes. MAC BLOC is the code.

Centrifugal pump / for abrasive liquids - max. 140 m, max. 15 000 m³/h | KWP GN/GC/GH/C2/H

The KWP-F/K/O is a pump which is constructed out of a back pull-out-design construction. It is enclosed in...

Centrifugal pump / for abrasive liquids - max. 140 m, max. 15 000 m³/h | KWP GN/GC/GH/C2/H

The KWP-F/K/O is a pump which is constructed out of a back pull-out-design construction. It is enclosed in a radially split volute housing and is available with different impeller versions namely free-flow impeller, open multi-vane impeller and non-clogging impeller. Through its single stage and single entry features, the KWP-F/K/O pump can be utilized in handling pre-treated sewage, waste water and other slurries.

Centrifugal pump / vertical / plastic - max. 88 m³/h | AS series

The single stage centrifugal pumps, suitable for transfers, recycling and distributing of corrosive liquids, are recommended for installation in cisterns, tanks or wells with a variable head. Using high quality and expertly designed to do the job, these units employ the hydraulic design which permits the vertical AS pumps to meet and satisfy plant specifications when working with chemical products, including those with solids. The hydraulic design is optimized using an open, closed, and recessed impellers, and features a variable rotation speed setting, in accordance with any constraints imposed by the plants or the nature of the liquids themselves. Made from high quality PP, PVC, PVDF and PE-HD. Can be up to three metres in length dependant on the tank depth. Shafts, support columns and motor supports can all be tailored to your needs. Standard sized support flanges made from PVC, and has threaded or flanged nozzles with hose adaptor.

Centrifugal pump / vertical / plastic - max. 55 m³/h | BS series

BS Series centrifugal pumps are designed for the filtration, recycling and treatment of corrosive liquids that are contained in constant level tanks and tend to crystallize and become putrid....

Centrifugal pump / vertical / plastic - max. 55 m³/h | BS series

BS Series centrifugal pumps are designed for the filtration, recycling and treatment of corrosive liquids that are contained in constant level tanks and tend to crystallize and become putrid. The are manufactured at standard lengths with no intermediate bearings, guide bushings and mechanical seals to dispose of any sliding parts. Its construction is hydraulically and mechanically advanced which allows the pumps to be used in conditions that require a more robust product than the normal vertical AS pumps due to the presence of liquids that cause corrosion and abrasion. The materials are PVDF, PVC and PP. It is made with a cantilever shaft that has no supports or bushings. The double-action impellers ensure a hydraulic sealing of the liquids.

Centrifugal pump / vertical / plastic - max. 150 m³/h | GP series

Savino Barbera's production line presents The GP vertical centrifugal pump, it is a high performance device designed with a corrosion resistant thermoplastic...

Centrifugal pump / vertical / plastic - max. 150 m³/h | GP series

Savino Barbera's production line presents The GP vertical centrifugal pump, it is a high performance device designed with a corrosion resistant thermoplastic technology. It has been designed to be ideally used for scrubber system that cleans gasses with minimal glitches and a round pump housing. Also, it has a measurement of up to 3000 mm with the same material of that of an AS. These GP series pumps have a vertical shaft and a volute pump casing that provides high performance and continuous service. The small burden of the pump casing enables operations in shallow and/or small volume tank applications.

Centrifugal pump / chemical-resistant / close-coupled - max. 88 m³/h | OMA series

OMA horizontal centrifugal close coupled pumps allow recirculation, transfer and distribution of vari0ous chemicals held in tanks or process vats. They can be used for loading and unloading trucks and similar operations as well.
Their design provides the highest possible resistance to chemicals and a very long service life. They can be delivered in setup with a base plate or on a trolley.
The SP series are used with priming chamber or with the flooded suction. If the prime chamber is used, the flow capacity is defined not only by fluid but also by gas pressure, temperature and foam.
OMA pumps are made out of the PVC, PP, PE-HD and PVDF. They have a design that features patented Savino Barbera seal. Thanks to the close coupled construction these pumps have very small encumbrance. The shaft of these pumps is directly connected to the motor. They come with standard size PVC bases but the customized setup is available as well. Finally, they are delivered with nozzles that have flanged or threaded hose adapter.