+7 (812) 645-08-06
Weld and glue fittings
select brand
Elbow fitting / plastic - DN 20 - 400, 90°, max. PN 10
The material used for the construction of these products is PVC-U 250 (with MRS = 25 MPa). The dark grey color and dimensions defined by compliance with the ISO 161-1 series and diameters from 20-500mm,...
Elbow fitting / plastic - DN 20 - 400, 90°, max. PN 10
The material used for the construction of these products is PVC-U 250 (with MRS = 25 MPa). The dark grey color and dimensions defined by compliance with the ISO 161-1 series and diameters from 20-500mm, are other important advantages. The solvent cement welding in the socket is provided for jointing to pipes that conform to ENI ISO 1452 and EN ISO 15493 standards.
The backing rings and drilled PN10 according to various standards, along with the maximum working temperature of 45 degrees Celsius, complete the list of features, while the use is not allowed with compressed gaseous fluids. Finally, these products can be used with potable water, as they offer superior fitness to the transport of potable water according to the European directives and Italian law.
The backing rings and drilled PN10 according to various standards, along with the maximum working temperature of 45 degrees Celsius, complete the list of features, while the use is not allowed with compressed gaseous fluids. Finally, these products can be used with potable water, as they offer superior fitness to the transport of potable water according to the European directives and Italian law.
Elbow fitting / plastic - DN 20 - 400, 45°, max. PN 10
Developed and engineered by Raccord Plast, this range of PVC molded fittings is specially designed for pressure fluid piping. All units are constructed with dark gray PVC-U 250, which...
Elbow fitting / plastic - DN 20 - 400, 45°, max. PN 10
Developed and engineered by Raccord Plast, this range of PVC molded fittings is specially designed for pressure fluid piping. All units are constructed with dark gray PVC-U 250, which...
Elbow fitting / plastic - DN 75 - 500, 90°
Developed and engineered by Raccord Plast, this range of PVC molded fittings is specially designed for pressure fluid pumping. All units are constructed with dark gray PVC-U 250,...
Elbow fitting / plastic - DN 75 - 500, 90°
Developed and engineered by Raccord Plast, this range of PVC molded fittings is specially designed for pressure fluid pumping. All units are constructed with dark gray PVC-U 250,...
Elbow fitting / plastic - DN 315 - 500, 45°
Material:
PVC-U 250 (unplasticized or rigid PVC, MRS = 25 MPa).
Colour:
Dark Grey (RAL 7011).
Dimensions:
Diameters according to metric series ISO 161-1 from Ø 20 mm to Ø 500 mm.
Reference to the standard EN...
PVC-U 250 (unplasticized or rigid PVC, MRS = 25 MPa).
Colour:
Dark Grey (RAL 7011).
Dimensions:
Diameters according to metric series ISO 161-1 from Ø 20 mm to Ø 500 mm.
Reference to the standard EN...
Elbow fitting / plastic - DN 315 - 500, 45°
Material:
PVC-U 250 (unplasticized or rigid PVC, MRS = 25 MPa).
Colour:
Dark Grey (RAL 7011).
Dimensions:
Diameters according to metric series ISO 161-1 from Ø 20 mm to Ø 500 mm.
Reference to the standard EN...
PVC-U 250 (unplasticized or rigid PVC, MRS = 25 MPa).
Colour:
Dark Grey (RAL 7011).
Dimensions:
Diameters according to metric series ISO 161-1 from Ø 20 mm to Ø 500 mm.
Reference to the standard EN...
Elbow fitting / plastic - DN 20 - 110, 10 bar, 90°
The PP molded fittings are made up of polypropylene homopolymer with the dimensions that range from Ø20 mm to Ø630 mm which are based on the metric series ISO 161/1. It has an extensive...
Elbow fitting / plastic - DN 20 - 110, 10 bar, 90°
The PP molded fittings are made up of polypropylene homopolymer with the dimensions that range from Ø20 mm to Ø630 mm which are based on the metric series ISO 161/1. It has an extensive...
Pneumatic cylinder / single-acting / compact / aluminium - ø 8 - 63 mm, 4 - 25 mm, 2 - 10 bar | QN series
The single-acting compact unit is made for NBR seals but other materials are made in stainless steel and brass. This is made for operating...
Pneumatic cylinder / single-acting / compact / aluminium - ø 8 - 63 mm, 4 - 25 mm, 2 - 10 bar | QN series
The single-acting compact unit is made for NBR seals but other materials are made in stainless steel and brass. This is made for operating pressure setups that work from 2 to 10 bar. It also works with an operating temperature of 0 to 80 degrees Celsius or -20 Celsius when dry air is added. This is a clean air unit that needs no lubrication but ISO VG32 may also be added if needed. The lubrication should not be stopped if it is applied. This works with a bore from 8 to 63 and can be mounted with screws in the body.